24 7 GOLF Simulator Par 3 Enclosure Instruction Manual
- October 30, 2023
- 24 7 GOLF
Table of Contents
24 7 GOLF Simulator Par 3 Enclosure
Product Information
The Golf Simulator Enclosure comes in two separate cartons: one long carton
containing the metal frame, and one rectangular carton containing the
enclosure material with the screen. The enclosure material is a single piece
construction that includes the projector
screen, side and ceiling panels. The poles required for assembly include 12 x
3.3ft (1m) poles (A), 11 x 3.3ft (1m) poles (B), 5 x 2ft (0.6m) poles (C), 4 x
1.8ft (0.55m) poles (D), and 1 x 3.3ft (1m) pole (F). The frame assembly
identification parts include connectors and crossover clamps.
Product Usage Instructions
-
Step 1: Assemble the upper frame using parts D and A, and poles A, B, and F. Connect the poles to the frame using the corresponding connectors and crossover clamps.
-
Step 2: Attach the projector mounts to the upper frame using the parts A, F, and A.
-
Step 3: Assemble the lower frame using parts B and C, and poles B, C, and D. Connect the poles to the frame using the corresponding connectors and crossover clamps.
-
Place the material in the centre of your enclosure area and spread the black material out so that you can identify the bottom of the screen.
The front of vour hitting screen (wear vou hit the ball into) is the smooth side.
-
Secure all 4 top edges of the enclosure material to the upper frame using the Velcro attachments
Start at the rear. before movina on to each side
-
Secure material to the upper left frame using the Velcro attachments
-
Secure material to the upper right frame using the Velcro attachments
-
Secure material to the upper front frame using the Velcro attachments
-
-
Step 4; Once the top is secured, attach the enclosure to each of the vertical upright legs.
-
Step 5: Assume the Lower Frame
-
Step 6: Wrap and secure the remaining perimeter edges to the frame using the Velcro attachments
Note:
It is recommended that two people work together to assemble the Golf Simulator
Enclosure. All poles should be fully inserted into the connectors and
crossover clamps for maximum stability and safety.
Packaging
Your Golf Simulator Enclosure will come in 2 separate cartons:
- 1 X long carton – metal frame
- 1 x rectangular carton enclosure material with screen
Poles
Connectors
**Enclosure material with Screen
**
The enclosure material is a single piece construction containing the projector
screen, side and ceiling panels
Poles
Connectors
