24 7 GOLF Simulator Par 5 Enclosure Projector Screen Instruction Manual
- October 30, 2023
- 24 7 GOLF
Table of Contents
24 7 GOLF Simulator Par 5 Enclosure Projector Screen Instruction Manual
Packaging
Your Golf Simulator Enclosure will come in 2 separate cartons.
1 x long carton – metal frame & 1 x rectangular carton – enclosure material
with screen
Poles
Connectors
-
2 x 105˚ 3-way connector
-
2 x 105˚ 3-way connector
-
2 x 2-way feet connector
-
**2 x 3-way feet connector
**
- **2 x crossover clamp
**
Enclosure material with Screen
The enclosure material is a single piece construction containing the projector screen, side and ceiling panels
Poles
Connectors
Step 1
Assemble the upper frame
Step 2
Attach projector mounts to the upper frame
Step 3.1
Place the material in the centre of your enclosure area and spread the black
material out so that you can identify the bottom of the screen.
The front of your hitting screen (wear you hit the ball into) is the smooth
side.
Step 3.2
Secure all 4 top edges of the enclosure material to the upper frame using the
Velcro attachments (see Figure 1.1)
Start at the rear, before moving on to each side.
Step 3.3
Secure material to the upper left frame using the Velcro attachments **(see
Figure 1.1)
**
Step 3.4
Secure material to the upper right frame using the Velcro attachments **(see
Figure 1.1)
**
Step 3.5
Secure material to the upper front frame using the Velcro attachments **(see
Figure 1.1)
**
Step 4
Once the top is secured, attach the enclosure to each of the vertical upright
legs.
Step 5
Assemble the lower frame
Step 6
Wrap and secure the remaining perimeter edges to the frame using the Velcro
attachments **(see Figure 1.1)
**
Documents / Resources
| 24 7
GOLF Simulator Par 5 Enclosure Projector
Screen
[pdf] Instruction Manual
Simulator Par 5 Enclosure Projector Screen, Simulator Par 5 Enclosure,
Projector Screen, Screen, Projector
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>