SeaLife SL680 Sea Dragon 5000 Pro Photo Video Light User Guide

SeaLife SL680 Sea Dragon 5000 Pro Photo Video Light

Product Information

The Sea Dragon 5000+ Pro Photo/ Video Light (Item SL680) is a high-performance underwater light designed for underwater photography and videography. It features a powerful 5000-lumen LED light that can be adjusted to five brightness modes, including a red light mode. The light comes with a 50W Li- ion battery that provides a long-lasting power supply. The light is waterproof and features a thermal sensor that dims the light if it overheats.

Product Usage Instructions

1. Charge the battery by placing it in the charging tray. The charging status indicator on the AC power adapter will turn green when fully charged. Note: The battery is pre-installed in the light. Remove the yellow contact cover that prevents accidental power on.
2. Before each dive, clean and lube the O-rings as needed. Only apply a thin film of lube. O-rings should appear shiny. Wipe off excess lube.
3. Insert the battery into the light with the battery label facing down and screw on the waterproof battery cap.
4. Connect the light to an arm or grip using the Flex-Connect YS adapter if connecting to a Flex-Connect system of arms, grips, and trays. The light may also be mounted directly to YS arms and grips. Use the YS-to-Ball Joint adapter for attaching to one-ball arms and grips.
5. To power on the light, quickly push the power button three times within one second. To power off, push and hold the button for two seconds.
6. The light powers on at 5000 lumens. Push and release the power button to cycle through five brightness modes: 5000 lumens, 5000 lumens + Color Boost, 3000 lumens, 1500 lumens, and Red. Repeat the cycle.
7. The battery status indicator, located next to the power button, is green when the battery charge is 100 – 51%, blue when 50 – 16%, and red when less than 15%. The LED will blink when using Color Boost. The light has a 10-minute reserve mode and will dim to 500 lumens for 10 minutes before the battery power is completely empty.
8. To activate the emergency signal mode, push and hold the power button for four seconds from the power-off state. Push and release the power button to select between a one-second blink interval and SOS Morse code.
9. To set the light to Advance Mode, push and hold the power button for eight seconds from the power-off state. Release the button when the battery status indicator starts blinking. Push and release the power button to select between Easy Mode (one blink per sec.) and Advanced Mode (two blinks per sec.). Push and hold the power button for two seconds to save the setting and power off. The Advance mode has eight brightness settings: 5000 lumens > 5000 + Color Boost > 6000 > 6000 + Color Boost > 3000 > 3000 + Color Boost > 1500 > Red. Repeat cycle.
10. After use, soak the sealed light in fresh water for 20 minutes to dissolve the salt residue. Towel dry. Allow the light to fully dry before storage.

IMPORTANT

1. Avoid using the light above water for more than 30 seconds. The front of the light head quickly gets very hot, which may cause burning when touched. Water is needed to keep the light cool.
2. If water has entered the battery compartment or under the lens port, immediately power off the light. On land, remove the battery.

Overview

The Sea Dragon underwater photo-video light delivers 5000 lumens in a smooth 120° beam without hot spots. A 90 CRI (color rendering index) COB LED array simulates natural sunlight allowing you to capture vibrant colors and sharp details. The new patent pending Color Boost™ mode combines specific red and white light that replenishes the lost red for a balanced, warm color effect. The light has 5 brightness settings in “Easy Mode” and 8 brightness settings in “Advanced Mode”, including a 2-minute 6000 lumen option. Easily mount the light to YS, 1” ball joint or Flex-Connect system of arms, grips, trays and mounts. The included 50Wh battery delivers 65 minute run time at full power.

What’s in the box

Installation instruction

1. Charge the battery. Place battery in charging tray. The charging status indicator is located on AC power adapter and will turn green when fully charged. Note: Battery is pre-installed in the light. Remove yellow contact cover, which prevents accidental power on.
2. Before each dive, clean and lube the O-rings, as needed. Only apply a thin film of lube. O-rings should appear shiny. Wipe off excess lube.
3. Insert the battery into the light [with battery label facing down] and screw on the waterproof battery cap.
4. Connect light to arm or grip. Use the Flex-Connect YS adapter if connecting light to the Flex-Connect system of arms, grips and trays. Light may also be mounted directly to YS arms and grips. Usethe YS-to-Ball Joint adapter for attaching to 1″ ball arms and grips.
5. To power ON the light, quickly push the power button 3 times within 1 second. To power OFF, push and hold the button for 2 seconds.
6. Light powers on at 5000 lumens. Push and release the power button to cycle through 5 brightness modes: 5000 lumens 5000 lumens + Color Boost  3000 lumens  1500 lumens  Red  Repeat cycle.
7. The battery status indicator, located next to the power button, is green when battery charge is 100 – 51%, Blue when 50 – 16%, Red when less than 15%. The LED will blink when using Color Boost. The light has a 10-minute reserve mode and will dim to 500 lumens for 10 minutes before battery power is completely empty.
8. To activate the emergency signal mode, push and hold power button for 4 seconds from power off state. Push and release power button to select between 1 sec blink interval and SOS Morse code.
9. To set the light to Advance Mode, push and hold the power button for 8 sec from the power off state. Release the button when the battery status indicator starts blinking. Push and release power button to select between Easy Mode (1 blink per sec.) and Advanced Mode (2 blinks per sec.). Push and hold the power button for 2 sec to save the setting and power off. Advance mode has 8 brightness settings: 5000 lumens > 5000 + Color Boost > 6000 > 6000 + Color Boost > 3000 > 3000 + Color Boost > 1500 > Red > repeat cycle.

IMPORTANT

1. Avoid using the light above water for more than 30 seconds. The front of the light head quickly gets very hot, which may cause burning when touched. Water is needed to keep the light cool. A thermal sensor will dim the light if it overheats.
2. After use, soak the sealed light in fresh water for 20 minutes to dissolve salt residue. Towel dry. Allow light to fully dry before storage.
3. If water has entered the battery compartment or under the lens port, immediately power off the light. On land, remove the battery. Allow the battery compartment to fully dry. Contact your local SeaLife dealer or SeaLife service center in your country for repair service.
4. Do not use a battery that has become wet or if the outer casing is cracked or damaged. Dispose of wet or damaged batteries in accordance with your local battery recycling regulations.
5. Remove the battery from the light before transporting, traveling or long-term storage. Always use the included protective battery cover when the battery is not inside the light or charging tray to prevent accidental short-circuiting the battery contacts.
6. Do not obstruct the safety pressure release valve located under the light head.
7. Observe all SCUBA dive safety rules and always control your buoyancy. Consult your dive instructor for dive safety questions.
8. Visit the SeaLife-Cameras.com website for troubleshooting advice, updates to these instructions, spare parts, and other helpful information.

GUARANTEE

SeaLife warrants the original purchaser of this product, for a period of one (1) year from the date of purchase, that the product is free from defects in workmanship and materials. In the event the original purchaser believes there is a defect in a product, it is recommended that the purchaser first visit www.sealife-cameras. com for product updates and information on how to get warranty repair service. Please contact your local SeaLife dealer or the importer in the country where the product was purchased for return information.

SEALIFE (C/O PIONEER RESEARCH), 97 FOSTER ROAD, MOORESTOWN, NJ 08057 USA INFO @SEALIFE-CAMERAS.COM WWW.SEALIFE- CAMERAS.COM

References

• CAMERAS.COM
• SeaLife Underwater Cameras | Best Underwater Digital Camera & Lighting
• SeaLife Underwater Cameras | Best Underwater Digital Camera & Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>