asTech Remote Diagnostic Device User Guide
- June 4, 2024
- asTech
Table of Contents
Quick Setup
Flip guide for setup steps.
Getting Started
Package Contents
-
asTech Device
-
USB Device
Wireless configuration file
User Guide
OEM position statements -
Ethernet Cable
-
OBD-II Cable
Pre-Setup Check List
- Before setup, please ensure you have the following:
- An internet connection with minimum up/down speeds of 10Mbps
- A computer and web browser for wireless network configuration (Google Chrome is recommended)
- Access to an open ethernet port on your network device
- Access to the vehicle’s OBDII port
- A battery support device is connected to the vehicle
Connect to Network
Locate an open Ethernet port on your network device
Connect the provided Ethernet cable to the open network port and the port on
your asTech device.
Connect to Vehicle
With battery support in place, switch the vehicle to the “ON” position, but do
not start it.
Note: If battery support is unavailable you may need to have the key on
and the engine running.
Connect the OBD-II cable to both the vehicle and your tech device. An IP
address, and “Connected & Waiting” should appear on the device screen. The
device is now ready to use.
Connect to Wi-Fi (Optional)
Note: If you wish to disconnect the Ethernet cable, and use the device
wirelessly, you can complete the steps below.
In the address field of a web browser, enter the IP address displayed on the
asTech device screen, followed by “/wifi.shtml”.
Select the network name of your business under “SSID”, and enter the network
password in the “Pass Phrase” field.
Submit a Support Request
To submit a Support Request, visit our website, or download the asTech app (available for iOS and Android).
IT Support Setup 1-888-486-1166 (Option
4)
Watch Video Setup Guide
Visit the link below for a complete setup guide.
www.astech.com/device
IT Support Setup
1-888-486-1166 (Option 4)