asTech All-In-One Diagnostics Calibrations User Guide
- June 17, 2024
- asTech
Table of Contents
asTech All-In-One Diagnostics Calibrations
Product Information
Specifications:
- Product Name: All-In-One tablet with VCI Link
- Connectivity: Wi-Fi
- Compatibility: Works with asTech App and Link
Product Usage Instructions
Connect tablet to Wi-Fi:
On the device home screen, tap Settings > Network & Internet > Wi-Fi. Slide
the Wi-Fi switch to ON.
Connect carside device:
Ensure your asTech app and Link have the most recent software update.
Login to asTech App:
- Connect to the car and click Remote Diagnostic Mode.
- Select WLAN.
- Select your Wi-Fi network.
- Login and connect to your Wi-Fi network.
- Once the screen shows with 2 blue checks, you are ready to go!
Start New Request:
On your tablet, tap the center blue asTech button to open the app and log
in using your credentials. You can now select your vehicle and click New
Request.
FAQ
Q: How do I ensure my asTech app and Link have the most recent software
update?
A: To update your asTech app and Link, check for updates in the respective
app stores or contact customer support for assistance.
Q: What should I do if I encounter connectivity issues during the login
process?
A: Make sure you are within range of a stable Wi-Fi connection and verify
that the correct Wi-Fi network is selected on both the tablet and carside
device. If issues persist, restart both devices and try the login process
again.
Connect tablet to Wi-Fi
On the device home screen, tap Settings > Network & Internet > Wi-Fi. Slide
the Wi-Fi switch to ON.
*Ensure your asTech app and Link have the most recent software update.
Connect carside device
- Connect to car and click Remote Diagnostic Mode.
- Select WLAN.
- Select your Wi-Fi network
- Login and connect to your Wi-Fi network.
- Once the screen shows 2 blue checks, you are ready to go!
Login to as Tech App
On your tablet, tap the center blue Tech button to open the app and log in using your credentials.
Start New Request
You are now able to go into the BasTech app, select your vehicle, and click New Request!