DIVERSITECH CP-22LPT Condensate Pump User Guide
- June 4, 2024
- DIVERSITECH
Table of Contents
DIVERSITECH CP-22LPT Condensate Pump
LED Indicator Status
LED STATUS/INDICATION/
Green LED| Indicates pump has power and is ready
Amber LED| Indicates pump is running and removing condensate from tank
Red LED
| Indicates pump is in alarm mode and that the system is shutoff/ disabled (if connected)
Specifications
CP-22 CP-22-230 CP22LP-230 CP-22LP CP- 22T-230
CP-22T CP-22LPT-230
CP-22LPT
Rated Voltage| 120 Volts/60Hz| 220 Volts/60 Hz
Rated Current Draw| 1.9 Amps| 1.0 Amps
Head Height| 22 ft. maximum| 22 ft. maximum
Flow Rate at Zero Head| 1.6 GPM| 1.0 GPM
Product Weight| 5 lbs. (4.7 lbs. low profile)| 5 lbs. (4.7 lbs. low profile)
Inlet Height from Base| 4.4″ (1.75″ low profile)| 4.4″ (1.75″ low profile)
General Information
- This pump is designed to automatically remove the condensate water that collects from appliances such as air conditioners, high-efficiency furnaces and de-humidifiers. The pump has a built-in tank that collects water from the appliance.
- When water collected reaches sufficient level inside pump tank, pump switches on and pumps water to a remote location for disposal.
- When tank is sufficiently empty, pump automatically switches off. Pump is capable of lifting water up to 22 ft. and is equipped with a check valve that prevents water from flowing back into tank when pump shuts off.
- The pump is outfitted with lights that show the status of power available, motor running, and high water (alarm) conditions. Pump is also equipped with a switch that activates when water in tank reaches an overflow condition.
- The overflow safety switch may be connected to turn off the appliance if high water condition occurs
Features
Diversitech Corporation 6650 Sugarloaf Parkway Suite 100 Duluth, GA 30097 800.995.2222 FAX 770.953.8600
DOC00046
©2014 DiversiTech Corporation PRINTED IN VIETNAM IMPRIMÉ AU VIETNAM IMPRESO EN
VIETNAM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>