EPEVER WiFi 2.G RJ45 D Adapter User Manual

: October 30, 2023
: EPEVER

Table of Contents

EPEVER WiFi 2.G RJ45 D Adapter
Product Information
Overview
Appearance
Specifications
Working processes
Documents / Resources

EPEVER WiFi 2.G RJ45 D Adapter

Thanks for selecting the EPEVER WiFi 2.4G RJ45 D adapter; please read this manual carefully before using the product.
Do not install the product in humid, salt spray, corrosion, greasy, flammable, explosive, dust accumulative, or other severe environments.

Product Information

The EPEVER WiFi 2.4G RJ45 D Adapter allows for real-time transmission of operational data from EPEVER solar controllers, inverters, or inverter/chargers to the EPEVER cloud server through a local 2.4G WiFi network. Users can remotely monitor connected devices and program parameters via the EPEVER server platform and mobile app. The adapter is applicable to EPEVER controllers, inverters, or inverter/chargers with an RJ45 port and is powered directly by the communication port. It has a communication distance of up to 20 meters and supports local monitoring and EPEVER cloud working modes.

Overview

Through a local 2.4G WiFi network, the EPEVER WiFi 2.4G RJ45 D can transmit all operational data from the EPEVER solar controller, inverter, or inverter/charger to the EPEVER cloud server in real time. Users can remotely monitor the connected devices and program parameters via the EPEVER server platform and mobile APP.

Features

Applicable to EPEVER controllers, inverters, or inverter/charger with RJ45 port
Use immediately after connecting; easy and convenient operation
Directly powered by the communication port
Up to 20 meters of communication distance
Support the Local monitoring and “EPEVER Cloud” working mode.

Appearance

RJ45 connector: Connect to the RJ45 port of the controller, inverter, or inverter/charger. RJ45 Pin Definition:

Pin	Definition	Pin	Definition
1	+5VDC	5	RS485-A
2	+5VDC	6	RS485-A
3	RS485-B	7	GND
4	RS485-B	8	GND

Specifications

Model Parameter|

EPEVER WiFi 2.4G RJ45 D

---|---
Working voltage| 5V± 0.5V(Powered by RS485 com. port)
Power consumption| Peak emission: 150mA; Idle: 310uA
Enclosure| IP30
Communication method| RS485
Communication parameters| 115200Bps, 8N1
Interface standard| EPEVER communication standard V1-1.0
Work frequency| 2.4 ~ 2.4835GHz
Work temperature range| -40℃~ 85℃
Dimension| 63mm x 19mm x 10mm
Net weight| 7.7g

Note: The WiFi adapter working voltage is 4.5V~5.5V and peak emission is 150mA, which is only suitable for devices that meet this requirement.

Working processes

Connect the WiFi adapter to the RJ45 port of the EPEVER device.
Add the WiFi adapter into the EPEVER cloud by the PC or mobile APP.
WARNING: The WiFi adapter is not available to the LS-B series. Suppose the WiFi adapter is installed in a metal-confined space. In that case, the signal transmission will be influenced, depending on the material and tightness of the metal-confined space.

Scenario 1: There is a local 2.4G WiFi network. The WiFi adapter can upload the collected data to the EPEVER cloud automatically.

Scenario 2: There is no local 2.4G WiFi network. The WiFi adapter cannot upload the collected data to the EPEVER cloud.