KONNWei RC-10 12V 10A Smart Automatic Battery Charger and Pulse Repair Tool User Manual
- October 30, 2023
- KONNWEI
Table of Contents
RC-10 12V 10A Smart Automatic Battery Charger and Pulse Repair Tool
User Manual
12V 10A & 24V 5A
SMART AUTOMATIC BATTERY CHARGER
& PULSE REPAIR TOOL
Product Profile
KONNWEI RC-10 Battery Charging Tester is also named as alternator ripple voltage test, which is to check and analyze the vehicle battery charging system, including generator, rectified, rectifier diode, etc., thus to find out Whether the output voltage of the generator is normal, the rectifier diode works properly and the abnormal. it will lead to over charge or incomplete charge of the battery, thus cause quick damage to the battery and greatly shorten the life of other loaded appliance. It can charger power for all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, Lithium iron phosphate battery (LiFePO4) etc. RC-10 Battery Repair owns battery repair function to fix the battery ‘s aging issues, capable of detecting battery solation and acid stratification to restore lost battery performance by using pulse voltage and current with certain frequency.
Technical Specifications
AC input | 100-240V/50-60Hz |
---|---|
Output Voltage | 12V 24V |
Output Current | 10A & 5A |
Output Volt No Load | 13.8V |
Minimum Start Volt | >5.0V |
Input Power with Load | Max 150W |
Input Power No Load | 5W |
Cooling | Fan |
Voltage Measurement Range 8-16V DC
Working Environment Requirement
Working Environment Temp: 0°C- 50°C/ -32°F – 122°F.
It is applicable for automotive manufacturers, automotive maintenance and
repair workshops, automotive battery factories, automotive battery factories,
automotive battery distributors , and educational organizations, etc.
Screen Definition
![KONNWei RC 10 12V 10A Smart Automatic Battery Charger and Pulse Repair Tool
- efinition](https://manuals.plus/wp-content/uploads/2023/06/KONNWei-RC-10 -12V-10A-Smart-Automatic-Battery-Charger-and-Pulse-Repair-Tool-efinition.jpg)
Battery Repair & Battery Charger
5.1 Battery Repair
Notice : Repair function can not be used with battery connected with
vehicle , otherwise the pulse voltage will damage the vehicle electronic
components.
Step1, Connect the red clamp to battery positive pole, black to negative
pole. Reverse connection will not damage battery but not able to repair.
Step2, Connect the KONNWEI RC-10 power side to A/C supply 50/60hz
110-230V.
Step 3, Hold on “ MODE ” Button and up 3 seconds to select “Repair “.
Till the repair light is on. The unit will automatically generate the pulse
current and voltage to fix the battery and increase its performance.
5.2 Battery Charge
Operation:
Step1 , Connect the red clamp to battery positive pole, black to negative
pole. Reverse connection will not damage battery but not able to charge;
Step2 , Connect the RC-10 power side to A/C supply 50/60hz 110-230V;
Step3, Select the battery charge option from the main menu. The RC-10
will automatically charge the battery with 7-stages output, and keep it at a
trickle current at last, so no need to worry about the overcharge or overheat
issues.
Step 4 : Hold on “ MODE” Button and up till 3 seconds.
Please Select Battery Type:
STD (Standard battery including ordinary lead acid battery);
AGM / GEL (AGM flat plate battery, AGM spiral battery, and Gel battery)Lithium
iron phosphate battery (LiFePO4) etc.
Service Procedures
If you have any questions, please contact your local store, distributor or
visit our website at www.konnwei.com
If it becomes necessary to return the tool for repair, contact your local
distributor for more information.
References
- KONNWEI | Official Home | OBD2 Scanner, Car Diagnostic Tool, Vehicle Electronics, Fixed car solutions
- KONNWEI | Official Home | OBD2 Scanner, Car Diagnostic Tool, Vehicle Electronics, Fixed car solutions