JoJo 20mm Slimline Water Storage Tanks User Manual
- October 30, 2023
- JoJo
Table of Contents
JoJo 20mm Slimline Water Storage Tanks
Product Information: 20mm Water Fitting
The 20mm Water Fitting is a standard fitting used for the additional outlet of Slimline water storage tanks. It consists of a front section, a back section, and a seal that is fitted in between the two. The fitting is designed to be fitted from the outside of the tank and has a recommended use of thread tape for all connections.
Product Usage Instructions
- Ensure that you have the required component, the 20mm Water Fitting, and thread tape.
- Identify the front section (1), back section (3), and seal (2) of the fitting.
- Insert the seal (2) in between the front (1) and back (3) sections of the fitting.
- From the inside of the tank, fit the back section (3) and seal (2) into the hole of the additional outlet of the Slimline water storage tank.
- From the outside of the tank, fit the front section (1) onto the back section (3).
- Wrap thread tape around all connections to ensure a secure fit.
Note: It is important to follow these usage instructions carefully to ensure proper installation and prevent any potential leaks.
Fitting the 20mm Water Fitting
The standard fitting used for the additional outlet of our Slimline water storage tanks.
COMPONENT REQUIRED
20mm Water Fitting
Important:
It is advised to use thread tape for all connections.
USAGE INSTRUCTIONS
The 20mm Water Fitting has a front (1) and a back (3) section, as well as a
seal (2) that is fitted in between the two.
When fitting it to your tank, the back of the fitting and the seal are fitted
from the inside of the tank, while the front is fitted from the outside.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>