JoJo 40mm Female Water Tank Fitting Instructions
- June 12, 2024
- JoJo
Table of Contents
JoJo 40mm Female Water Tank Fitting
Product Information:
The 40mm Water Fitting is a standard fitting that is used as the outlet at the bottom of water storage tanks. It consists of a front section, a back section, and a seal that is fitted in between the two. The fitting is designed to be used with thread tape for all connections.
Product Usage Instructions:
- Ensure that you have all the required components, including the 40mm Water Fitting and thread tape.
- Locate the outlet at the bottom of your water storage tank where you want to install the fitting.
- Insert the back section of the fitting and the seal into the outlet from inside the tank.
- Wrap thread tape around the threads of the front section of the fitting.
- Insert the front section of the fitting from outside the tank and screw it onto the back section until it is tight.
- Check for any leaks and tighten the fitting if necessary.
Note: It is important to follow these instructions carefully to ensure a proper and secure installation of the 40mm Water Fitting.
Fitting the 40mm Water Fitting
Standard fitting used as the outlet at the bottom of our water storage tanks
COMPONENT REQUIRED
Important:
It is advised to use thread tape for all connections.
USAGE INSTRUCTIONS
- The 40mm Water Fitting has a front (1) and a back (3) section, as well as a seal (2) that is fitted in between the two.
- When fitting it to your tank, the back of the fitting and the seal are fitted from the inside of the tank, while the front is fitted from the outside
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>