JoJo CPM170 1.1kW Centrifugal Booster Pump Instruction Manual

October 30, 2023
JoJo

JoJo CPM170 1.1kW Centrifugal Booster Pump Instruction Manual

JoJo CPM170 1.1kW Centrifugal Booster Pump

Features & Benefits

  • 1-year Quality Warranty
  • NRCS approved
  • Energy-efficient
  • Easy to operate
  • Automatic start/stop function
  • Pre-wired with a 3-point plug
  • Dry running protection
  • Over-current protection

FIG 1 Features & Benefits

Get the most out of your purchase!

  • Get the most out of your purchase!

1-year Quality Warranty

JoJo pumps purchased from an approved JoJo retail outlet and/or distributor carry a 1-year warranty from the date of purchase. In order to maintain your warranty, always ensure you install, operate and maintain the pump as per the instructions provided in this manual.

Detailed T’s and C’s, as well as return policies and procedures are in the back of this manual.

Performance table

FIG 2 Performance table

Best efficiency range

FIG 3 Best efficiency range

FIG 4 Best efficiency range

Additional pump details

JoJo CPM170 1.1kW Centrifugal Booster Pump

FIG 6 Additional pump details

PUMP DIAGRAM

FIG 7 PUMP DIAGRAM

FIG 8 PUMP DIAGRAM

Important information

  •  The pump must be earthed with no strain placed on the electrical cable.
  • All maintenance should be carried out with the power supply disconnected.
  • The pump is designed for clean water use only, i.e. water containing no solid particles. Pumping muddy water or water containing suspended solids will severely reduce the lifespan of the unit and falls outside of the factory warranty.
  • Extending the cable will affect your factory warranty. Always make use of an approved extending plug adapter.
  • The pump should be installed in a ventilated, undercover area to protect the unit against direct sunlight, rain and spray from any irrigation system. A JoJo pump cover is recommended for best protection.
  • Note: this pump is not suited for use with our Pump-to-Tank Connector Kit as the suction required is 32mm and the pump to tank kit is only 25mm. Using the incorrect size suction piping can severely limit the performance and lifespan of the pump.

FIG 10 PUMP DIAGRAM

INSTALLATION

FIG 11 INSTALLATION

FIG 12 INSTALLATION

PRIMING INSTRUCTIONS

IMPORTANT: always prime the pump before use to ensure proper functionality and to prevent possible damage to any of the components.

  1. Ensure that the ball valve between the tank and pump is open.

  2. To allow the air in the pump to escape and the pump to be filled with water by gravity feed, unscrew the
    priming screw. The suction line and pump should slowly fill with water until a steady flow is visible from the
    air valve. Note: this also ensures that all air has been removed from the casing and suction piping.

  3. If after a few seconds water is not visible from the air valve, fill the pump volute manually until it is overflowing.

  4. Put the priming screw back in place and then tighten. Do not over tighten.

FIG 13 PRIMING INSTRUCTIONS

OPERATING INSTRUCTIONS

After priming the pump, do the following to test it and ensure proper operation:

FIG 14 OPERATING INSTRUCTIONS

FIG 15 OPERATING INSTRUCTIONS

FIG 16 OPERATING INSTRUCTIONS

05. Close the inlet valve (a) and open the discharge valve (b). The pump will switch on and run for 15 to 20 seconds. The pump should then stop operating and the failure light on the flow controller should be illuminated. This tests the run dry operation.

06. Open the inlet valve (a) and press the reset button on the flow controller. The pump will start running. After completing steps one to six, the pump will be ready for use.

07. Close the discharge valve and wait for the pump to switch off. Open the discharge valve a little bit so that the
pressure on the pressure gauge decreases slowly. Observe at what pressure the pump switches on again. Adjust
the adjustment screw to increase/decrease the desired cut-in pressure (the pressure at which the pump switches
on). Note: the adjustment screw does not determine the pressure at which the pump switches off.

JOJO PUMP WARRANTY

Please read this warranty in conjunction with the South African Consumer Protection Act 68 of 2008.

  1.  JoJo warrants its pumps to the original end user/purchaser to be free of defective materials and workmanship under normal use for a period of 12-months from the date of purchase from authorised retailers and distributors. To be eligible for warranty repair or replacement, the pump must be returned to the point of purchase during and up to the expiry date of the warranty period. Proof of date of purchase is required.

  2. Liability in terms of this warranty shall be limited to repair or replacement of the pump. Liability for all and any other losses and/or subsequent damages suffered are expressly excluded.

  3. This warranty does not obligate JoJo to bear any cost of removal, installation, transportation, or other charges
    which may arise in connection with a warranty claim.

  4. The warranty shall not apply to repairs or service necessitated by normal wear and tear or for lack of reasonable and proper maintenance.
    This warranty does not apply if in the sole judgement of JoJo the product or any of the components have been;
    (a) Tampered with, disassembled (unless as per JoJo’s specific instructions relevant to peripheral pumps and
    clearly displayed on fan cover), repaired or altered (except as may be pre- authorised by JoJo in writing);
    (b) Subjected to misapplication, misuse, neglect or accident; or
    (c) Used to pump anything for which the pump was not designed. Such use may compromise or harm the
    pump and/or any of its components.

IMPORTANT: this is the exclusive warranty given by us and no other warranty or guarantees, expressed or implied shall be of any force or effect. No distributor or other person is authorised to assume any liability or obligated for JoJo other than expressly provided herein.

RETURN POLICIES AND PROCEDURES

Refunds
Within 5 days of purchase: as part of the cooling off clause (section 16 of the CPA), the pump may be returned for
refund, provided that it is still within the original packaging, unused, and in the original condition.

Within 10 days of purchase: the pump may be returned for refund or replacement if it does not meet the purpose
for which intended (section 20 of the CPA), provided that it is still within the original packaging, unused, and in the original condition. In such instance the pump will be returned to JoJo for an evaluation, after which an inspection report will be provided confirming whether it meets the necessary requirements for refund or replacement.

Returns/repairs
Within 12 months: should the pump not operate as specified, or cease to do so within 12 months after being
purchased, the return procedure is as follows:

  • Return the pump to the store from which purchased, together with the proof of purchase (to confirm that it is within the 12-month warranty period). Please ensure that the condition of the pump is as specified in section four of this warranty, and that it is still packed in the original packaging.

  • The store will send the pump to the nearest JoJo factory for an evaluation.

  • At JoJo’s election, (a) the pump will either be repaired (if repairable) which repairs shall be and warranted for
    three months, or the balance of the 12-month period, whichever period is longer; or (b) the pump will be
    exchanged (this only applies if the pump is non-repairable, and a replacement pump in similar visual condition will be provided by JoJo).

  • The evaluation (once the pump is sent back to JoJo), repair/exchange and delivery to the store will take place
    within 14 days.

Our return/repair request form is available on our website at www.jojo.co.za.

FIG 17

Thank you for choosing JoJo. If there is anything that you are unsure about or need assistance with, please do not hesitate to contact us.

www.jojo.co.za | +27 11 695 8300

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals