JoJo Rainhead Rainwater Harvesting Tanks Instructions
- June 12, 2024
- JoJo
Table of Contents
Connecting a gutter to your tank
A basic how to guide
COMPONENTS REQUIRED
Connecting a gutter to your tank
A basic how to guide
INSTALLATION
-
Direct existing downpipe to Rainhead (C).
-
Install the Rainhead (C) as per the installation instructions on our website (located on the product page).
-
Install the First Flush Rainwater Diverter (D) as per instructions provided on our website (located on the product page).
-
Cut a hole of 110.5mm in the middle of the lid and fit the pipe through the hole.
Tip
An additional 480mm Filter Screen can be fitted underneath the lid to keep out
smaller debris and further improve the quality of harvested rainwater. Just
ensure to clean it out regularly.
Did you know?
Our Rainhead is supplied with an adapter that allows you to connect either
110mm, 80mm or 75mm plumbing pipe to your Rainhead?
If however your installation includes a First Flush Rainwater Diverter, we
always advise using 110mm pipe from your Rainhead to your Diverter tube.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>