JoJo 110mm to 80-75mm Adapter Instructions
- October 30, 2023
- JoJo
Table of Contents
JoJo 110mm to 80-75mm Adapter
Product Information: 110mm to 80/75mm Adapter for Rainwater Harvesting
Systems
The 110mm to 80/75mm Adapter is a component that is designed to connect 80mm or 75mm pipes to a JoJo rainhead or first flush rainwater diverter in a rainwater harvesting installation. The adapter is included as part of the rainhead product offering and can be used in various ways, such as beneath the rainhead, at the top of the T-junction supplying water into the first flush diverter tube, or on the side of the T-junction supplying water into the tank.
It is important to note that it is advised to always use a 110mm pipe for the diverter tube.
Product Usage Instructions
- Identify where you want to install the adapter in your rainwater harvesting system: beneath the rainhead, at the top of the T-junction supplying water into the first flush diverter tube or on the side of the T-junction supplying water into the tank.
- Ensure that you have the appropriate pipe size (80mm or 75mm) that needs to be connected to the JoJo rainhead or first flush rainwater diverter.
- If you are using the adapter at the top of the T-junction supplying water into the first flush diverter tube, ensure that you have another adapter beneath the rainhead (if a rainhead is used in the installation).
- Insert one end of the adapter into the 80mm or 75mm pipe and the other end into the JoJo rainhead or first flush rainwater diverter.
- Ensure that all connections are secure and tight.
- If you are using the adapter on the side of the T-junction supplying water into the tank, ensure that you use a 110mm pipe for the diverter tube.
Using our 110mm to 80/75mm Adapter with a rainwater harvesting installation
HOW IT WORKS
Acts as an adapter to connect 80mm or 75mm pipes to a JoJo rainhead or first flush rainwater diverter.
APPLICATION
The adapter can be used as follows:
- Beneath the rainhead (one adapter is included as part of the rainhead product offering).
- Top of the T-junction supplying water into the first flush diverter tube. Note: if the adapter is used here you will need to use another adapter beneath the rainhead (if a rainhead is used in the installation).
- Side of the T-junction supplying water into the tank.
Important:
It is advised to always use a 110mm pipe for the diverter tube.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>