Euri EBPN22-40WS2000-2 LED Back Lit Flat Panel Installation Guide
- October 30, 2023
- Euri
Table of Contents
Euri EBPN22-40WS2000-2 LED Back Lit Flat Panel Installation Guide
PLEASE REVIEW THE INSTRUCTIONS AND WARNINGS LISTED BELOW PRIOR TO PROPER INSTALLATION
SAFETY INSTRUCTION WARNING
Basic safety precautions should always be followed when installing, including the following:
- Read instructions carefully before installing.
- This LED Panel requires professional installation and maintenance.
- The power supply of the LED Panel should be powered by a dedicated external LED driver.
- Disconnect the power supply before installing or maintenance.
- Make sure the wires have been properly connected before powering on the device.
- Ensure the product has enough space for heat dissipation.
- Ensure the luminaries are never covered by any heat insulation mat or slim layer material at anytime.
- IP40 for indoor use only, not for damp location; IP54 for indoor damp location.
- Ambient Temperature: -10C˚ to + 45C˚, Avoid direct sunlight.
- Storage Conditions: Cool & dry conditions.
WARNING
- Switch off before installation.
- Switch on only after complete installation and examination of the circuit.
CAUTION
Make sure that the mounting surface or structural member used for installation can support the weight of LED Panel.
INSTALLATION PROCEDURE
RECESSED
SUSPENDED
SURFACE MOUNTED
RECESSED MOUNTING (CLIPS)
PRODUCT ILLUSTRATIONS REPRESENTED IN THIS INSTALLATION GUIDE MAY VARY IN SIZE DEPENDING ON MODEL NUMBER. INSTALLATION REMAINS THE SAME.
©2022. Euri Lighting | A Division of IRTRONIX Inc. All Rights Reserved
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>