QSFPTEK S5300-48T4X Stackable L2++ 1-10G Switch Owner’s Manual

October 30, 2023
QSFPTEK

QSFPTEK S5300-48T4X Stackable L2++ 1-10G Switch Owner's Manual

QSFPTEK S5300-48T4X Stackable L2++ 1-10G Switch Owner's
Manual QSFPTEK S5300-48T4X Stackable
L2++ 1-10G Switch

www.qsfptek.com

I. Product Overview

QSFPTEK S5300-48T4X is a new-generation aggregation 1/10GE switch developed for carrier IP MAN and enterprise networks. Based on the new high-performance hardware and the BDROS platform, S5300-48T4X supports ACL, selective QinQ, 1:1 and N:1 VLAN switching, Ethernet OAM, carrier-level QoS, industry-level 10G Ethernet ring, etc.

II. Product Characteristics

Innovative BVSS Switch Stacking Technique

  • Innovative Stackable BVSS (Virtual Switch System): S5300-48T4X virtualizes multiple physical devices into one. The performance, reliability and management of the virtual system are superior to the physical ones.
  • Improved Performance: Switch stacking makes full use of each link in the physical devices, which avoids STP blocking the link and protects the original link to the maximum extent.
  • High Reliability: Based on the advanced distribution mechanism and efficient cross-physical link aggregation link function, the logic control plane, service control plane and service data plane are separated. Thus, S5300-48T4X can support continuous layer-3 routing forwarding, avoiding service interruption as a result of a single point of failure.

Easy Management : Switch stacking realizes single IP management, greatly improving the networking efficiency and lowering the operating cost..

[email protected]

Industrial Ethernet Ring with Zero Delay and Zero Packet Loss

  • Supports industrial Ethernet ring network protection protocol. The protection switching time is less than 50ms. The solution has been applied in power industry, rail transportation industry and military projects for decades. It can achieve zero packet loss.

Carrier-class Ethernet Switches

  • Supports carrier Ethernet ring network protection protocol. The protection switching time is less than 50ms. It also supports simple and effective redundancy protection mechanism such as STP/RSTP/MSTP protocol and dual uplink standby link protection and LACP link aggregation. These functions meet the requirement of carrier grade high reliability.
  • The solution has perfect Ethernet OAM, which can real time monitor the network operating state and rapidly detect and locate the malfunction.
  • The solution supports strong ACL function. The solution supports L2~L7 data access and control based on the physical port, VLAN IDs, source MAC/IP addresses and protocol port, which provides flexible ways of policy control.
  • Supports ISSU (In-Service Software Upgrade), guaranteeing the user data non-stop forwarding when the system is upgrading.
  • Supports various L2 multicast function, including IGMP-Snooping, user fast-leave mechanism and cross VLAN multicast replication function.

Carrier QoS Policies

  • Supports complex traffic classification based on VLAN, source MAC/IP addresses, destination MAC/IP addresses, IP protocols, or priorities. It also supports priority remark. These functions provide an effective way for users to optimize their businesses.
  • Provides flexible bandwidth control policies and support a port base or flow-based Committed Access Rate (CAR) and guarantees Layer 3 line-speed forwarding.
  • Every port supports 8 priority queues.
  • Supports multiple queue grooming algorithms such as SP, WRR or SP+WRR.

Comprehensive IPv6 Solutions

  • Comprehensively supports IPv6 Neighbor Discovery, ICMPv6Path MTU Discovery.
  • Supports IPv6 based Ping, Traceroute, Telnet, SSH, ACL, meeting the need of IPv6 network equipment management and service control..

Comprehensive Security Mechanisms

  • Adopts advanced hardware architecture design, realizing the hierarchical scheduling and protection of the packet. It provides multiple security measures to defend against DOS or TCP attacks; and supports command line authority control based on user levels.
  • Comprehensive Security Certification: Complies with IEEE 802.1x, Radius, BDTacacs+.
  • Supports the suppression of broadcast, multicast and unknown unicast packet, ensuring the equipment can operate normally in harsh network conditions.
  • Has the perfect loop detection mechanism.
  • Supports the port isolation in a same VLAN and DHCP- Snooping IP +MAC + port binding.

Convenient Management and Maintenance

  • Supports multiple management styles such as Console, Telnet, SSH.
  • Supports WEB based management. The management is simpler and more effective.
  • Supports upload and download of TFTP files.
  • Supports ISSU (In-Service Software Upgrade).
  • Supports SNMP. By cooperating with Baud’s smart “NMS”, functions including the equipment auto-discovery, the topology management, the equipment configuration management, the performance data analysis, and the fault management can be realized. In this way, the network management is simplified and the user gets a new product experience.

III. Product Specifications

QSFPTEK S5300-48T4X Stackable L2++ 1-10G Switch - Product Specifications
1 QSFPTEK S5300-48T4X
Stackable L2++ 1-10G Switch - Product Specifications 2

IV. Features

QSFPTEK S5300-48T4X Stackable L2++ 1-10G Switch - Features
1 QSFPTEK S5300-48T4X Stackable L2++
1-10G Switch - Features 2 QSFPTEK S5300-48T4X Stackable L2++ 1-10G Switch - Features
3 QSFPTEK S5300-48T4X Stackable L2++
1-10G Switch - Features 4

V. Ordering Information

QSFPTEK S5300-48T4X Stackable L2++ 1-10G Switch - Ordering
Information

[email protected]

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

QSFPTEK User Manuals

Related Manuals