QSFPTEK S5300-16S8TS4X Stackable Gigabit Ethernet L2++ Switch Owner’s Manual

**QSFPTEK S5300-16S8TS4X Stackable Gigabit Ethernet L2++ Switch Owner’s Manual

**

Product Overview

S5300-16S8TS4X is a next-generation access 1/10GE switch introduced by QSFPTEK . It is targetedat theIPMAN (metropolitan area network), government and enterprise networks, Internet café and disk- less working environment. It is developed on the basis of high performance hardware and BDROS softwareplat form with QSFPTEK own independent intellectual property rights. It supports functions such as powerful ACL, flexibleQinQ, 1:1 or N:1 VLAN switching, Ethernet OAM, carrier-level QoS and industry-level 10GEEther-ring,ensuring this switch series meets application requirements in all kinds of complicated sites. It alsosupportslayer-3 routing protocol.2900.

Product Characteristics

Innovative BVSS Switch Stacking Technique

• Innovative Stackable BVSS (Virtual Switch System): S5300-16S8TS4X – virtualizes multiplephysical
  devices into one. The performance, reliability and management of the virtual systemare superior tothephysical ones.

• Improved Performance: Switch stacking makes full use of each link in the physical devices, whichavoidsSTP blocking the link and protects the original link to the maximum extent.

• High Reliability: Based on the advanced distribution mechanism and efficient cross-physical linkaggregation link function, the logic control plane, service control plane and service data plane are separated. Thus, S5300-16S8TS4X – can support continuous layer-3 routing forwarding, avoiding serviceinterruption as a result of a single point of failure.

• Easy Management : Switch stacking realizes single IP management, greatly improving the networking efficiency and lowering the operating cost..

Industrial Ethernet Ring with Zero Delay and Zero Packet Loss

• Supports industry-level EAPS and their protection shift time is less than 50ms. Their high reliability is represented by the null packet loss, which has been proved by many years of application intheGrid, rail transportation and defense systems.

Telecom-Level Ethernet Switch

• Supports the telecom-level Ethernet-ring protection protocol with a protection shift time of lessthan50ms,STP/RSTP/MSTP, backup of active and standby uplinks and LACP link aggregation to cater totherequirements of high reliability of carriers.
• Support Ethernet standard 802.3u, 802.3x, 802.3ad, 802.1d, 802.1p, 802.1q, 802.1w, 802.1ad.
• Support system status LED, port dynamic lED
• Provides the perfect Ethernet OAM mechanism to monitor the network running status in real timefor rapidtrouble locating and detection.
• Supports powerful ACL functions to access and control L2-L7 data based on physical port, VLAN, MAC,IPand protocol port ID, and providing carriers flexible and various policy control methods.
• Supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding duringsystemupgrade.
• Supports various L2 multicast functions, including IGMP-Snooping, fast-leave and trans-vlan

Flexible and Convenient Management and Maintenance

• Supports management modes such as the console port, Telnet, SSH, etc.
• Supports the WEB management mode, which is easy and efficient so that it makes installationanddebugging convenient.
• Supports TFTP-patterned file upload/download management.
• Supports ISSU (In-Service Software Upgrade).
• Supports SNMP and QSFPTEK NMS smart network management platform to realize automaticequipment discovery, network topology management, equipment configuration management, performance data statistics and analysis and trouble management

Carrier-Level QoS Policies

• Supports priority retagging and complicated flow classification based on VLAN, MAC, sourceaddress, destination address, IP or priority to better streamline carrier’s services.
• Supports provides flexible bandwidth control policies and supports port-/flow-based flowlimit, andensuring the line speed forwarding of each port to make sure the high quality of video, audioanddataservices.
• Supports 8 priority queues by each port.
• Supports multiple queue schedule algorithms such as SP, WRR, and SP+WRR”.

Versatile IPv6 Solutions

• Supports the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, etc.
• Supports Ping, Traceroute, Telnet, SSH, ACL and so like on the basis of IPv6, meeting IPv6networks’ equipment management requirements and service control requirements.

Perfect Security Mechanisms

• Equipment-level security: The advanced hardware infrastructure design realizes the level-basedpacketschedule and packet protection, prevents DoS-/TCP- related SYN flood, UDP flood, broadcast stormorlarge traffic attacks, and supports level-based command line protection, endowing different levelsof userswith different management permissions.
• Supports perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+.Supportsstorm/multicast/unicast limit to ensure the normal running of equipment in harsh network conditions.
• Supports a perfect ring detection mechanism to e n s u r e t h e l o n g – t e r m s t a b l e r unni ngofnetwork.Supports port isolation within the same VLAN, DHCP-Snooping, and IP plus MACplusPort
  binding for ensuring

Product Specifications

SFP+ uplink ports
Console| 1
Switching capacity| 128Gbps
Forwarding rate| 96 Mpps
Chassis Dimensions(HxWxD)(mm)| 44x440x280
Chassis Weight(KG)(empty)| 4
Package Dimensions(HxWxD)(mm)| 94x576x448
Package Weight(KG)| 5.2
Power consumption no-load| <18W
Power consumption full-load| 38W
Power supply AC: 100V-240V 50Hz±10%| 1
Total output BTU (1000BTU/H=293W)| 153.58
Fan number| 2
Noise@25°C(dBA)| 45
MTBF(H)| >200,000
Forwarding mode| Store-forward
Flash (MB)| 16
DRAM (MB)| 256
MAC| 16K
Buffer size(MB)| 2
Interface vlan| 64
Routing table IPv4| 512
Routing table Ipv6| 129

Features

VLAN

|

• 4K Active VLAN
• QinQ & Selective QinQ
• VRP, Private VLAN
• Voice VLAN

---|---
**Spanning Tree**|

• **** 802.1D (STP)
•  802.1W(RSTP)and 802.1S(MSTP)
• BPDU guard, root guard and loopback guard

**Multicast**|

• IGMP v1/2/3
• IGMP Snooping
• IGMP Fast Leave
• IGMP FilterØ   MVR

**IP**|

• Static route
• RIP, OSPF
•  IP v4/v6 dual stack
• DHCP Server/Client/Relay

**QoS**|

• CAR, HQoS, MAC/IP/TCP/UDP/VLAN/ COS/DSCP/TOS based
• QoS, 802.1P/DSCP priority re- labeling, SP,WRR, and “SP+WRR”
• Tail-Drop, WRED, flow monitoring and traffic shaping

Security|

• Port isolation, Port security, and “IP+MAC+port” binding, MAC stickyDHCP Snooping and option 82, DAI& IP source guard

****|

• IEEE 802.1x, Radius and BDTacacs+
• L2/L3/L4 ACL flow identification and filtration Anti-attack from DDoS, TCP’s SYN Flood, UDP Flood, etc
• Broadcast/multicast/unknown unicast storm-control
•  Md5, SHA-256, RSA-1024, AES256,etc

**Reliability**|

• Static/LACP link aggregation, Interface backup
• EAPS and ERPSØ   ISSU

**Management**|

• Console,Telnet,SSH v1/2,HTTP,HTTPS SNMP v1/v2/v3, RMONØ   TFTP, FTP, SFTPØ   NTPØ   ZTP(Zero Touch Provisioning)
• SPAN, RSPAN

DHCP|

• DHCP server/relay/client
• DHCP snooping/option82

**Environment**|

• Operating temperature/humidity:-10°C-50°C, 10%-90% non-condensing
• Storage temperature/humidity:-20°C-70°C, 5%-90% non-condensing

Certi fi cation|

• CE, FCC,ROHS

Accessories|

• Power cord, rackmount kits, console cable

Ordering Information

ports (1x Console port, 16x 100M/1000M SFP ports, 8x 1G RJ45/SFP Combo ports, 4x 10GE/GE SFP+ uplink ports; 100 to 240 VAC input, 60 HZ, the cooling fan, 1U,standard 19 inch rack-mounted installation)

References

• QSFPTEK - Compatible Optical Transceivers Factory Outlet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>