lyyt 156.704UK 12Vdc/24Vdc Single Colour LED Tape User Manual
- October 30, 2023
- lyyt
Table of Contents
lyyt 156.704UK 12Vdc/24Vdc Single Colour LED Tape
Product Information
- Product Name: Lyyt Single Colour LED Tape
- Item Ref. Description:
- 156.704UK 12V LED Tape 5m – UV
- 156.705UK 12V LED Tape 5m – Red
- 156.711UK 12V LED Tape 5m – Blue
- 156.712UK 12V LED Tape 5m – Natural White
- 156.714UK 12V LED Tape 5m – Amber
- 156.715UK 12V LED Tape 5m – Cool White
- 156.716UK 12V LED Tape 5m – Warm White
- 156.755UK 24V LED Tape 5m – Red
- 156.761UK 24V LED Tape 5m – Blue
- 156.764UK 24V LED Tape 5m – Amber
- 156.766UK 24V LED Tape 5m – Warm White
- Voltages: Available in 12Vdc or 24Vdc
- Length: Comes in a 5m reel
- Installation: Should be carried out by competent electrical installers, observing the relevant electrical safety procedures
- Connector: Fitted with a 2.1mm DC jack socket for power input for easy connection to a power supply
Product Usage Instructions
- Clean the surface where the LED tape will be attached.
- Peel off the backing of the LED tape to expose the self-adhesive.
- Attach the LED tape to the surface.
- If a 2.1mm jack is not fitted to the power supply, remove the connector and strip it for a bare wire connection.
- If the power supply has enough capacity to power more than one reel, connect another reel to the end of the first reel via the 2.1mm DC jack plug.
- Make sure that the power supply has higher than the rated capacity in Amps (A) for the current required to power the length(s) of LED tape installed. Refer to the table in the manual for reference.
- Visit www.avsl.com to select from their range of 12Vdc and 24Vdc power supplies that are suitable for powering Lyyt LED tapes.
- Dispose of the product according to your local council guidelines as it is classified as Electrical or Electronic equipment and should not be disposed of with other household or commercial waste at the end of its useful life.
product Description
Item Ref.| Description| Luminous Flux| Light Intensity per
LED milicandelas
---|---|---|---
156.704UK| 12V LED Tape 5m – UV 60/m| 540lm/m| 5000mcd
156.705UK| 12V LED Tape 5m – Red| 60lm/m| 600mcd
156.711UK| 12V LED Tape 5m – Blue| 30lm/m| 500mcd
156.712UK| 12V LED Tape 5m – Natural Wht| 720lm/m| 3996mcd
156.714UK| 12V LED Tape 5m – Amber| 45lm/m| 600mcd
156.715UK| 12V LED Tape 5m – Cool White| 720lm/m| 3996mcd
156.716UK| 12V LED Tape 5m – Warm White| 720lm/m| 3996mcd
156.755UK| 24V LED Tape 5m – Red| 60lm/m| 600mcd
156.761UK| 24V LED Tape 5m – Blue| 30lm/m| 500mcd
156.764UK| 24V LED Tape 5m – Amber| 45lm/m| 600mcd
156.766UK| 24V LED Tape 5m – Warm White| 720lm/m| 3996mcd
INSTALLATION INSTRUCTION
- Lyyt single color LED tape is supplied on 5m reels in either 12Vdc or 24Vdc voltages. Installation should be carried out by competent electrical installers, observing the relevant electrical safety procedures.
- This LED tape has a self-adhesive backing to allow it to be easily attached to a clean, non-porous surface.
- Where less than 5m of tape is needed, there are solder points as shown below, where the tape may be cut to size. These cut points will be at 5cm intervals for 12V tape and 10cm intervals for 24V tape. To re-connect to another length of tape after cutting, strip away the epoxy coating at the solder points and solder a wire from “+” to “+” and a wire from “-” to “-” as shown below. Some accessories are supplied with the tape reel for this purpose. In order to retain weatherproofing, it is advised to seal the cuts and joints with silicone glue.
- Each 5m reel of single colour LED tape is fitted with a 2.1mm DC jack socket for power input for easy connection to a power supply. This connector may be removed and stripped for a bare wire connection if a 2.1mm jack is not fitted to the power supply.
- If the power supply has enough capacity to power more than one reel, another reel can be connected to the end of the first reel via the 2.1mm DC jack plug.
- It is imperative that the power supply should have higher than the rated capacity in Amps (A) for the current required to power the length(s) of LED tape installed. Please see the table below for reference
- Please visit www.avsl.com to select from our range of 12Vdc and 24Vdc power supplies that are suitable for powering Lyyt LED tapes.
- This product is classed as Electrical or Electronic equipment and should not be disposed of with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
- Errors and omissions excepted.
- Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford Park, Manchester. M41 7JQ.
- www.avsl.com
- AVSL (Europe) Ltd, Unit 3D North Point House,
- North Point Bus. Park, New Mallow Road, Cork, Ireland.
- Single Colour LED Tape Manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>