PYLE PT390BTU Digital Home Theater Wireless BT Stereo Receiver User Manual

PYLE PT390BTU Digital Home Theater Wireless BT Stereo Receiver

Please take a few minute to read the instruction manual and operating instructions. This will tell you how to use the receiver system. Here, you will nd unit features and operation instructions to ensure trouble free use and installation. Please retain these operating instructions for future reference.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DON’T EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. THIS DEVISE IS INTENDED FOR CONTINUOUS OPERATION!

BEFORE USE

1.  Ensure that the power line voltage is AC 110V/220V If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
2.  Protect the Power Cord Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
3.  Do not block any ventilation openings.
4. Keep the unit free from moisture, water, and dust. Do not place objects filled with liquids, such as vases, on the unit.
5. Operating Environment Operating environment temperature and humidity: +5 ºC to +35 ºC (+41 ºF to + 95 ºF); less than 85 %RH (cooling vents not blocked)
6. Install this sound system in a well ventilated, cool, dry, clean place. Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)
7. Avoid metals dropping in the unit Avoid metals dropping into the unit, like needle, hairpins, smaller metal objects
8. DO NOT OPEN THE UNIT as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.
9. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry or slightly damp cloth.

OPERATION

1. POWER: Use this button to turn ON or OFF the speakers.
   Caution: Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit.

2. INPUT SELECT: Select the input source: CD/DVD, USB, Radio, Wireless BT Streaming

3. MICROPHONE VOLUME: MIC VOL Adujst “MIC VOL” knob to increase or decrease the karaoke volume

4. ECHO: Adjust “ECHO” to get a satiable echo effect.

5. TREBLE/BASS Turn TREBLE/BASS knob to adjust treble/bass tone master channel.

6. MASTER VOLUME: You can adjust MASTER VOLUME from turn right volume up , turn left volume down.

How to replace the preset radio stations?
Use the remote control to set the radio stations.
NOTE: The preset radio stations can’t be deleted, BUT CAN BE REPLACED.
Operations Steps:

1. Press TUNER MODE on the remote control
2.  Pres AM/FM, and select FM
3. Press PRE/NEXT to select the stations you don’t want to keep;
4. Press TUNING again choose the radio stations you want to save
5. Press MEMORY to save the new stations

In this way, you can replace the preset radio stations.
Wireless BT Playback

1. Make sure the unit is powered “ON”
2. Set the input mode to “BT”
3. Use your smart phone or other compatible Wireless BT-enabled device to search for available Wireless BT Networks- The PT390BTU will appear in the Wireless BT Network list as ‘PT390BTU’
4. Connect and pair: Connecting does not require a password (if prompted for a password enter ‘0000’ (4 zeros)

Note:

1. In Wireless BT Streaming mode, control volume both through your unit and your Wireless BT device.
2.  Wireless BT Streaming operation range may be effected by other electronic parts or barrier between your unit and the Wireless BT device.

CONTROLS & FUNCTIONS

FRONT PANEL

1. Power ON/OFF key
2. USB/SD signal input
3. Music balance knob
4. Music bass knob
5. Music treble knob
6. Tuner AM/FM conversion button
7. Tuner automatic search button
8. Tuner fine-tuning button
9. Audio input select key
10. Mic Echo volume knob
11. Mic Bass knob
12.  Mic Treble knob
13. Mic Master Volume knob
14. Mic 1 input
15. Mic 2 input
16. lpod/mp3 signal input
17. USB/SD Prev button
18. USB/SD Play pause button
19. USB/SD Next button
20. VFD Display
21. Music Master Volume knob

BACK PANEL

1. FM/AM Radio antenna
2. lpod/mp3 Signal input
3. Dvd Signal input
4. Audio Output 1
5. Audio Output 2
6. R-LSpeaker a output jack
7. R-L Speaker b output jack
8. Take out the breeze fan export
9. Power line (~110V /220V)
10. 110V/220V selection switch

REMOTE CONTROL

1. CD/DVD Audio Input Select key
2. Tuner Audio Input Select key
3. Tuner Automatic Search key
4. Tuner Memory key
5.  Tuner Stereo/Mono key
6. USB/SD player key
7. Audio Mute key
8. None
9. IPOD/MP3 Audio Input Select key 19. Music Volume – key
10. AUX/USB Audio Input Select key
11. Tuner FM Select key
12. Tuner AM Select key
13. USB/SD Next key
14. USB/SD Prev. key
15. Tuner tuning + select key
16. Tuner tuning – select key
17. Music Volume + key
18. USB/SD pause key

TROUBLESHOOTING

If you experience any of the following difficulties while using the unit, use this troubleshooting guide to help you remedy the problem, should any problem persist, consult your nearest dealer.

No power

| •      The ac power cord is disconnected

•      Wall socket poor connection or the wall socket is

inactive

No sound

| •      Disconnected speakers and components.

•      Make sure you select the correct component on

the unit

•      Volume control at lowest level

•      Speaker wire short or open

One master speaker NO sound

| •      Bad or Incorrect speaker connections

•      Balance not in center

•      Speaker wire short or open

Bad Sound

| •      The place is unfit for the speakers

•       Bad or incorrect speakers connections

•      Treble and bass controls are too low

Microphone has no sound| •      Microphone volume is too low

•      Microphone not turned ON

•      Microphone wire short or open

Severe hum or noise

| •    Check that the speakers and components are

connected securely

•   The plugs and jacks are dirty

Digital Home Theater Wireless BT Stereo Receiver
Aux (3.5mm) Input, MP3/USB/SD/AM/FM Radio, (2) Mic Inputs (300 Watt)

System Features:

• 4-Channel Receiver System
• Powers Up to 4 Speakers
• Wireless BT Streaming Ability
• AM/FM Radio with Digital LCD Display
• USB Flash & SD Memory Card Readers
• MP3 Digital Audio File Compatibility
• Aux (3.5mm) Input Connector Jack
• Ability to Connect External Devices (iPhone, Android, Smartphone, iPad, Tablet, etc.)
• (4) Pair Speaker Terminal Binding Posts
• (2) 1/4” Microphone Inputs
• (2) Pair RCA (L/R) Audio Input Connector Jacks
• (2) Pair RCA (L/R) Audio Output Connector Jacks
• Connects to TV, Home Theaters, External Speaker Systems
• Radio Station Auto Scan, Tuning Control
• Built-in Ventilation Cooling Fan
• 50 Radio Station Memory Pre-Sets
• Main Volume/Balance/Treble/Bass Controls
• Microphone Volume/Bass/Treble/Echo Controls
• Includes Antennas, Audio Cable, Remote Control

Wireless BT Streaming Connectivity:

• Instantly Receives Wireless Music Streaming
• Works with all of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, etc.)
• Wireless BT Version: 3.0

What’s in the Box:

• Home Theater Receiver
• Remote Control
• AM/FM Antennas
•  Power Cable

Technical Specifications:

• Power Output: 300 Watt MAX
• Impedance: 8 Ohm
• T.H.D.: <1%
• S/N Ratio: >76dB
• Input Lvl. Impedance: 350mV/47k
• Tone Characteristics: +/-12dB
• Input Sensitivity: 300mV/33k
• USB/SD can play what file types: MP3, WMA, WAV
• Maximum USB/SD Card support size: 8GB
• Frequency Response: 20Hz-20kHz
• Battery Operated Remote, Requires (2) x ‘AAA’, Not Included
• Power Supply: 110/220V Switchable
• Dimensions (L x W x H): 16.9” x 12.2” x 4.7” -inches

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>