action bold and bold MP Installation Guide

June 4, 2024
ACTION

action bold and bold MP logo

Installation Guideaction bold and bold MP

Removal

Separate the inner plastic frame from the outer silicone cover by starting at one corner.

Installation

action bold and bold MP - cover 1| action bold
and bold MP - cover 4
---|---
action bold and bold MP - cover 2| action bold
and bold MP - cover 6
| action bold and bold MP - modes6
---|---

OmniPose ™

action bold and bold MP - lock6

| action bold and bold MP - modes2

Cleaning Instructions for action Bold

We recommend cleaning the case after every use cycle. Most hospital-grade disinfectant wipes with high alcohol concentrations are safe to use on the aXtion Bold case. A few that we recommend are:

  • Sani-Cloth AF3
  • Super Sani-Cloth
  • Cave-Wipes
  • Clorox Healthcare Bleach Germicidal Wipes
  • Oxivir TB

Follow these steps:

  1. Clean the back cover with a hospital-grade wipe, using a small stroking motion. Pay special attention to the crevices.
  2. Use a new hospital-grade wipe to clean the front cover and screen protector.
  3.  Let the case air dry before using.

Internal cleaning may be done as needed following these steps

  1. Remove the tablet from the case and set it aside.
  2. Clean the inside back cover with a hospital-grade wipe, using a small stroking motion. Pay special attention to the crevices.
  3. Use a new hospital-grade wipe to clean the inside front cover and screen protector.
  4. Let the case air dry before putting the tablet into the case.
  • Hospital-grade disinfectant wipes may have more detailed instructions for use. Please refer to the manufacturer’s instructions.
  • These instructions are only for cleaning cases by The Joy Factory. To clean the tablet, please refer to the manufacturer’s instructions.

DISCLAIMER for action ®
Bold Military Grade Certified Cases
Congratulations on the purchase of your new action Bold case from The Joy Factory Inc!
BEFORE USE READ ALL INSTRUCTIONS CAREFULLY. IMPROPER USE OF THE CASE COULD RESULT IN DAMAGE TO YOUR DEVICE.
This action Bold case is designed only for the device type listed on the box. Thus it is only intended for and only warranted for proper use with that specific tablet and not for use with another device type. Because different generations of tablets have different specifications, please refer to the packaging for your action Bold case to determine whether your tablet will be compatible with the case you have purchased.
If you are not certain whether the device you intend to use with the aXtion Bold case is compatible with the tablet model you have, please contact the company from which you
purchased the device or the manufacturer of the device to determine whether it is a model supported by this action Bold case.
If the aXtion Bold case is damaged or not functioning properly for any reason; immediately stop use. The Joy Factory expressly disclaims all liability and all warranties, whether expressed or implied, for use of an action Bold case that has been damaged for any reason. The case is covered under our one-year manufacturing warranty and can be replaced free of charge for any manufacturing defects. If you believe the case has a manufacturing defect, cease use immediately and contact The Joy Factory by email at support@thejoyfactory.com or by telephone at 949-216-8888, Monday through
Friday, 9:00 a.m. to  5:00 p.m., Pacific Standard
Time. The Joy Factory will not replace an action Bold case that is damaged, other than one with a manufacturing defect, The Joy Factory is not liable to replace or pay for the replacement of your device or any additional items which may be damaged from use of a case with manufacturing defects.
The Joy Factory disclaims all liability for lost action Bold cases and any device stored in a lost cause. Do not use our action Bold case with any other case or bumper. Use of
an additional case or bumper will hinder the military gradecertification and Joy  Factory disclaims all liability from such use and will void any and all warranties expressed or implied.  Any alteration to your action Bold case will void any and all warranties and guarantees, whether expressed or implied, and The Joy Factory disclaims any and all liability for damages arising from use of an altered aXtion Bold case.

2021-1101
Contact us
support@thejoyfactory.com

Documents / Resources

| action bold and bold MP [pdf] Installation Guide
bold and bold MP, bold, bold MP
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals