Targus HB367 Ergonomics Folding Wireless Keyboard User Manual

October 30, 2023
Targus

**Targus HB367 Ergonomics Folding Wireless Keyboard User Manual

**

Package contents

  • 1x Wireless Keyboard
  • 1x Charging Cable
  • 1x User Manual

Specification

Bluetooth Version BT 5.1
Dimensions 392.62×142.95×6.4mm / 15.46×5.63×0.25 in
Operating distance <8 m / 26.2 ft
Rechargeable lithium battery 250mAh
Uninterrupted Work Time 100 hours
Stand-by Time 90 days
Compatibility iOS,MAC OS

Indicators & definition

Indicators And definition

  1. Power indicator: Turns green for 3 seconds
    Charging indicator: Red while charging.Green when fully charged.
    Low battery indicator: Flashes red when charging is required.

  2. Caps Lock indicator: Green light is on.

  3. Bluetooth indicator:
    Press Fn+Q to BT1, green indicator flashes slowly. Press Fn+W to BT2, blue indicator flashes slowly. Press Fn+E to BT3, red indicator flashes slowly. Flashes blue, long press Fn+Q/W/E for 5s to enter into pairing mode.

  4. Charging port: Only used for charging

Power ON/OFF Keyboard
Power On: Unfold the keyboard, green indicators will flash 3s then off. Power Off: Fold the keyboard

Pairing Steps
Pairing with 1
st device
Step 1. Unfold the keyboard, power indicators will flash blue for 3s, then off.
Step 2. Press Fn+Q to enter channel 1 mode.
Step 3. Long Press Fn+Q for 3 seconds to enter pairing mode, BT1 indicator will flashGREEN and start to search the available Bluetooth device.
Step 4. On your bluetooth device, find the Bluetooth name “Nulea RT06” and clicktoconnect it.
Step 5. The status indicator will be off after successfully paired.

Pair with 2nd device
Step 1. Press “Fn+W” to enter channel 2 mode.
Step 2. Long press “Fn+W” for 3 seconds to enter pairing mode, BT2 indicator will flash BLUE and start to search the available Bluetooth device.
Step 3. Repeat the above pairing step 4 and step 5.

Pair with 3rd device
Step 1. Press “Fn+E” to enter channel 3 mode.
Step 2. Long press “Fn+E” for 3 seconds to enter pairing mode, BT3 indicator will
flash RED and start to search the available Bluetooth device.
Step 3. Repeat the above pairing step 4 and step 5.

Keys and Functions

Key icon Fn on iOS Fn on MAC
     esc esc esc
Brightness- Brightness-
Brightness+ Brightness+
Switch App Mission Control
Search for Search for
Screenshot Screenshot
Last track Last track
Play/Pause Play/Pause
Next track Next track
Mute Mute
Volume – Volume –
Volume + Volume +
Lock screen Lock screen

Sleep Mode
The keyboard will enter sleep mode if idle for 30min. Press any key to exit sleep mode.

Charging
Step 1. Connect one end of the included type-c cable to a USB charger, and connect
the opposite end to the charging slot on the keyboard.
(Note: Output: DC 5 V / 500mA; USB charger is not included)
Step 2. The charging indicator will glow red while the keyboard is charging. A full charge takes approximately 2 hours.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.

  • Connect the equipment into an outlet on a circuit different
    from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals