DELTA CHILDREN W551450 Universal Toy Box Instruction Manual

: June 12, 2024
: DELTA CHILDREN

W551450 Universal Toy Box

ASSEMBLY INSTRUCTIONS

Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.

DELTA ♥ CHILDREN ™

Toy Box

ADULT ASSEMBLY REQUIRED

Due to the presence of small parts during assembly, keep out
of reach of children until assembly is complete.

NEED EXTRA HELP?
We make assembly easy with our tips & tricks video
https://www.deltachildren.com/pages/instructions

When contacting Delta Consumer Experience Center please reference the above information. Before contacting
Delta Consumer Experience Center please ensure that the information above matches the information found on the
label on the bottom of the lid, please reference the information found on the product when contacting Delta
Consumer Experience Center.

CONSUMER EXPERIENCE CENTER

Delta Children’s Products Corp |114 West 26th Street New York, NY 10001
646-435-8727 | wcs@DeltaChildren.com | www.DeltaChildren.com

ASSEMBLY INSTRUCTIONS

SAVE BIG WITH

DELTA CHILDREN

Visit Deltachildren.com To Start Shopping

delta

REVIEW TO WIN $2500

R U L E S T O E N T E R

“We LOVE, LOVE, LOVE this crib”

My husband was impressed with the directions and organization of the hardware package.
He easily assembled this crib in an hour without any help. It’s very sturdy and we like that it
has adjustable levels for the mattress height. To top it all off, it’s so incredibly darling!!!

1 WRITE A REVIEW for this product on the store’s website from where it was purchased
2 TAKE A SCREENSHOT of your review and upload it to www.DeltaChildren.com/Review
3 IT’S THAT EASY! Upon submission, you’ll be instantly ENTERED TO WIN $2,500

FOLLOW US FOR MORE CHANCES TO WIN

@deltachildren

SCAN HERE

For more
information &
to see all of
our products

PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT

parts panel

ASSEMBLY INSTRUCTIONS

Parts: Hardware kits part#40903

hardware kits

Toy Box Assembly, Step 1

Attach (1) Lid (Part E) to (1) Back Panel (Part C) using (4) 20mm Screws (Part H), (4) 12mm
Screws (Part K) and (4) M4x10mm Cap Nut (Part L). Tighten with the Phillips Screwdriver.

ASSEMBLY INSTRUCTIONS

Toy Box Assembly, Step 2

Attach Lid support brackets (part N) to the back and lid from step 1 using (8) M5x12 mm
Screws (Part J). Tighten with the Phillips Screwdriver.

ASSEMBLY INSTRUCTIONS

Toy Box Assembly, Step 3

Attach (1) Side Panel (Part A) to the assembly from step 2 using (4) Φ8×30 mm Wood Dowels
(Part G) and (4) M6 x 30mm Bolt (Part F). Tighten with the M4 Allen Wrench.

Toy Box Assembly, Step 4

Slide the Bottom Shelf (Part D) in the grooves on the Side Panels, into the groove on the Back
Panel as shown.

Toy Box Assembly, Step 5

Parts and tools required to complete step

Attach (1) Front Panel (Part B) to the assembly from step 4 using (4) Φ8×30 mm Wood Dowels
(Part G) and (4) M6 x 30mm Bolt (Part F). Tighten with the M4 Allen Wrench.

Toy Box Assembly, Step 6

Attach the Lid Supports (Part M) to the assembly from step 5.

WARNING:

TO AVOID RISK OF SUFFOCATION, DO NOT ALLOW CHILDREN TO PLAY INSIDE THIS CONTAINER.

CAUTION: This unit is equipped with a special lid support; the lid support must be attached as indicated in the assembly instructions prior to use. The purpose of the safety lid support is to prevent injury to a child’s fingers or other parts when opening and closing the lid. The safety lid support must function properly, when the lid can be opened at any angle, the lid must not drop more than 1/2 inch from it’s own weight, with the exception of the final 2 inches before reaching its closed position. This unit should not be used unless the safety lid support is properly attached and functioning properly. Contact Delta Children’s Products with any questions.

NOTES ON ASSEMBLY:

-During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape specified in the instructions.
-To assemble this unit you may be required to place the unit on it’s side and face. It is strongly recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.

NOTES ON USE:

Keep children and others safe by following these simple rules:

– Do not allow any child to play on furniture
– Do not allow climbing on any piece of furniture.
– Do not allow hanging from any piece of furniture.
– Always monitor your child’s activity when in the nursery.

NOTES ON CARE AND MAINTENANCE:

– Do not scratch or chip the finish.
– Inspect the product periodically, contact Delta Children’s Products for replacement parts or questions.
– Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a
damp, cold basement. These extremes can cause a loss of structural integrity.
-To preserve the luster of the high quality finish on your product, it is recommended to place a doily or
felt pad under any items you place on the finish.
-Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
-Do not use abrasive chemicals.
-Do not spray cleaners directly onto furniture.
-Lift slightly when moving on carpeting to prevent leg breakage.
-Use of a vaporizer near furniture will cause wood to swell and finish to peel.

FOR REPLACEMENT ONLY

IF NECESSARY remove the Lid Support as shown .

Consumer Experience Center
www.DeltaChildren.com
Delta Children’s Products Corp
114 West 26th Street
New York, NY 10001
646-435-8727
wcs@DeltaChildren.com

Limited Warranty: This Delta Product is warranted to be free from defects for a period of 90 Days from the date
of purchase under normal use. If a product is defective during this period, we will at our option repair or replace
the defective part or product. This limited warranty extends only to the original retail purchaser and is valid only
when supplied with proof of purchase, or if received as a gift, when the registration is on file with Delta. This limited
warranty does not cover the following:
• Products purchased as floor models or samples.
• Items purchased on an “as-is” basis, as a second hand product, or as a resale product.
• Items purchased at a Final sale, a “Going out of Business” sale or a Liquidation sale.
This limited warranty gives you specific legal rights and you may also have other rights which vary from state to
state.