NAVTOOL Video Input Interface Push Button User Manual

October 30, 2023
navtool

NAVTOOL-Video-Input-Interface-Push-Button-PRO

Product Information

The Video Input Interface Push Button is a device designed and manufactured by NavTool.com. It allows for the easy switching between video sources on your car’s display screen. The device has a push button interface for easy control. Please note that NavTool.com recommends having a certified technician install this device. NavTool.com is not responsible for any damage that may occur during installation. All product names, logos, brands, trademarks, and registered trademarks are property of their respective owners.

Product Usage Instructions

  1. Connect the Video Input Interface Push Button to your car’s display screen according to the instructions provided with the device.
  2. Turn on your car’s display screen and switch to the input source that corresponds to the Video Input Interface Push Button.
  3. Press the push button on the Video Input Interface Push Button to switch between connected video sources. The device supports up to three video sources.

Note: If you experience any issues with the device, please refer to the user manual or contact NavTool.com for assistance.

NOTICE: We recommend having this installation performed by a certified technician. All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.

USING

You do not need to use the push button If only a reverse camera was installed
The reverse camera will automatically display when the vehicle is placed in Reverse. It will automatically Turn OFF when the vehicle is placed in any other gear and will display the factory screen.

To View Video 2 (Front Camera if Installed)
If no video source is connected you will see a “No Signal” message.

  1. Step 1: Press the push button once to Turn ON the interface. This will display Video 1.
  2. Step 2: Press the push button once to switch from Video 1 source to Video 2 source.
  3. Step 3: Press and Hold the push button for 2 seconds to return to the factory screen.

Contact NavTool.com for any further questions or support:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals