MINN KOTA 1866650-MIN i-Pilot Link Wireless Remote User Guide

1866650-MIN i-Pilot Link Wireless Remote

Compatible with all Bluetooth® enabled i-Pilot® LinkTM Systems

i-PILOT® LINKTM REMOTE

Screen Navigation

Speed Up

Steer Left
Prop On/Off

Ok
Steer Right

Spot-Lock
Speed Down

Home Header Talon

Dashboard
Info Boxes
Touch Screen Active
Area

Display Screen
Content Area

GPS Signal Strength
Displays the level of GPS signal strength. If no bars appear, or if the bars are flashing, the system has not yet acquired a GPS fix.
Humminbird Connection
Displays white arrows to show when the i-Pilot Link controller is communicating with the Humminbird. Grey arrows indicate that there is no communication.
Talon
Displays the connection with one or two Talons and indicates if the Talon(s) are deployed. One Icon will display in the event that one Talon is paired, and two will display if two Talons are paired. The icons will turn grey to indicate that the Talon(s) is not connected.
i-PILOT LINK DASHBOARD

PROP

SOG mph

CONTROL BUTTONS
Home
Press to bring up the Home Screen Buttons.
Screen Navigation
Press to navigate the menu without touching the screen. Press and hold to lock and unlock the remote.
Ok
Press to accept menu selections. Press to power remote on. Press and hold for 3 seconds to power remote off.
Speed Up & Speed Down
Press to increase or decrease motor speed.
Steer Left & Steer Right
Press to steer the motor to the left or to the right.
Prop On/Off
Press to turn the Prop on and off.
Spot-Lock
Press to enable and disable Spot-Lock.
HEADER

Remote

Humminbird Talon

Battery GPS Signal Connection Motor Time

Strength

Battery

Motor Battery t n
Displays motor battery level when prop is disengaged.
Time
Displays the current time.
Remote Battery
Displays the battery level of the remote.

1.5

High Speed Bypass

Prop Speed

Prop

Cruise

On/Off Speed Control

Over Ground

SOG Speed Over Ground Displays the current speed over ground.
High Speed Bypass
Displays when High Speed Bypass is engaged.
Prop On/Off
Displays when the Prop is enabled. Rotates when the Prop is on and the Prop Speed is greater than zero. Blinks when a mode of navigation is used that requires the prop to be enabled.
Cruise Control
Displays when Cruise Control is engaged along with the Target Speed.
PROP Prop Speed Displays the current Prop Speed. Can be adjusted in 1/2 speed increments between 0 and 10.

INFO BOXES

TEMP 72 °F BRG 359° DPTH 1 ft TEMP 72 °F BRG 359° DPTH 1 ft

Temperature

Bearing

TEMP 65 °F HDG 255° DPTH 5 ft

Heading

Depth

BRG HDG

Bearing
Bearing is the direction from the boat’s current location to the target destination during navigation.
Heading
Heading is the direction that the motor is pointing.

i-PILOT® LINKTM
QUICK REFERENCE GUIDE

TEMP Temperature The current water temperature based on communication with the Humminbird.
DPTH Depth The current water depth based on communication with the Humminbird.

i-PILOT LINK HOME SCREEN BUTTONS

Legacy AutoPilot

The AutoPilot button is used to engage

and disengage Legacy AutoPilot.

Advanced AutoPilot

The AutoPilot button is used to engage

and disengage Advanced AutoPilot.

Record

The Record button is used to start and

stop recording an iTrack.

HSB

Select the HSB (High Speed Bypass)

button to engage High Speed Bypass.

High Speed Bypass automatically sets

the Prop speed to 10. Double press to

engage. Single press to disengage.

Lock Keys

Select the Lock button to lock the

buttons and touch screen. Pressing and

holding the Screen Navigation button

also locks and unlocks the remote.

Cruise Control

Press the Cruise Control button to

enable or disable Cruise Control. Once

Cruise Control is enabled, pressing the

Speed Up

or Speed Down

buttons will change the Target Speed

rather than the Prop Speed.

Mark Waypoint

Press to mark a Waypoint.

Settings

Press the Settings button to open the

Settings menu and adjust settings

within the i-Pilot Link system.

Options

Press the Options button to open the

Options menu and adjust options

within the i-Pilot Link system.

Go To Spot-Lock

The Go To Spot-Lock button is used

to open a menu used to navigate to a

Spot-Lock location. The i-Pilot Link

system will only bring up Spot-Locks

within a quarter mile range.

Go To iTrack

The Go To iTrack button is used to open

a menu used to navigate to an iTrack.

The i-Pilot Link system will only bring

up iTracks within a quarter mile range.

Go To Waypoint

The Go To Waypoint button is used

to open a menu used to navigate to

a Waypoint location. The i-Pilot Link

system will only bring up Waypoints

within a quarter mile range.
Ulterra t

The Ulterra button is used to access

functions specific to controlling the

Ulterra.

©2018 Johnson Outdoors Marine Electronics, Inc.

t Only available with Ulterra.

n Only available with Ultrex.

minnkotamotors.com

CRUISE CONTROL

Engaging Cruise Control
1. Scroll through the Content Area using your finger or the Screen Navigation button to find the Cruise Control button.
Cruise Control
2. Select the Cruise Control button using Cruise Control your finger or by pressing the Ok button.
3. The Cruise Control target speed will appear in the Dashboard. The Target Speed can be increased and decreased using the Speed Up and Speed Down buttons.

Disengaging Cruise Control
1. When Cruise Control is engaged, scroll through the Content Area using your finger or the Screen Navigation button to find the Cruise Control button.
Cruise Control
2. Select the Cruise Control CruiseControl button using your finger or by pressing the Ok button.
3. The Cruise Control Target Speed will disappear from the Dashboard.
AUTOPILOT

Engaging AutoPilot
1. Scroll through the Content Area using your finger or the Screen Navigation button to find the AutoPilot button.
Autopilot
2. Select the AutoPilot button using your Autopilot finger or by pressing the Ok button.
3. The AutoPilot Active Band will appear in the Content Area. Either Legacy AutoPilot or Advanced AutoPilot will be engaged depending on the AutoPilot Mode selected.

Legacy Autopilot

Advanced Autopilot

Disengaging AutoPilot
1. When AutoPilot is engaged, scroll through the Content Area using your finger or the Screen Navigation button to find the AutoPilot
Autopilot
button.
2. Select the AutoPilot Autopilot button using your finger or by pressing the Ok button.
3. The AutoPilot Active Band will disappear from the Content Area.

SPOT-LOCK

Engaging Spot-Lock

1. Press the Spot-Lock button.

2. The Spot-Lock Active Band will appear in the

Content Area.

SL0163

3. To save the Spot-Lock,

select the Spot-Lock

Active Band using your

finger or by pressing

the Ok button.

Distance

4. Scroll through the 0 ft

Spot-Lock Control Screen using your finger or

by pressing the Screen Navigation button

to find the Save button. Save

5. Select the Save button using your finger Save
or by pressing the Ok button to save the Spot-Lock. The Save icon will disappear from the Active Band.

Spot-Lock Jog
(Heading Sensor required.)
1. To engage Spot-Lock Jog, first engage Spot-Lock. Use the Speed Down (jog

Part #2397107

backward), Speed Up (jog forward), Steer Left (jog left), and Steer Right (jog right) buttons to jog the Spot-Lock location 5 feet in the selected direction from the current SpotLock location.

2. To Jog the Spot-Lock location with the Screen

Navigation button, select the Spot-Lock

Active Band to open the Spot-Lock Control

Screen. Select the Back

Back ,Forward

Forward

,

Left Left , or Right Right buttons using your finger or

by scrolling to one with the Screen Navigation

button and pressing the Ok button.

Disengaging Spot-Lock
1. With Spot-Lock engaged, press the Spot-Lock button on the remote to disengage Spot-Lock.
2. The Spot-Lock Active Band will disappear from the Content Area.

Go To a Saved Spot-Lock

1. Scroll through the Content Area using your finger or the Screen Navigation button to find the Go To Spot-Lock button.
GoTo Spot-Lock
2. Select the Go To Spot-Lock GoTo button using Spot-Lock your finger or by pressing the Ok button. A list of Spot-Locks that are within a quarter mile will appear.

3. Scroll through the list of Spot-Locks using your finger or the Screen Navigation button to find a Spot-Lock.

4. Select the Spot-Lock using your finger or

pressing the Ok button.

5. The Spot-Lock

SL0000000163

Active Band will

appear in the Content Area. The appearance of the

100 ft
SL0000000163

Active Band will vary

depending on the

distance between

the current location

and the selected

Distance

Spot-Lock.

100 ft

WAYPOINTS

Mark a Waypoint

1. Scroll through the Content Area using your

finger or the Screen Navigation button to

find the Mark Waypoint Mark button. Waypoint

2. Select the Mark Waypoint

Mark Waypoint

button using

your finger or by pressing the Ok button.

Go To a Saved Waypoint

1. Scroll through the Content Area using your finger or the Screen Navigation button to find the Go To Waypoint button.
GoTo Waypoint
2. Select the Go To Waypoint GoTo button using Waypoint your finger or by pressing the Ok button. A list of Waypoints that are within a quarter mile will appear.

3. Scroll through the list of Waypoints using your finger or the Screen Navigation button to find a Waypoint to navigate to.

4. Select the Waypoint using your finger or by

pressing the Ok button.

5. The Waypoint Active WP1210

Band will appear in

the Content Area.

146 ft

Disengage Go To Waypoint
1. When Go To Waypoint is engaged, scroll through the Content Area using either your finger or the Screen Navigation button to find the Waypoint Active Band.

ECN 39363

2. Select the Waypoint Active Band using your finger or by pressing the Ok button.
3. Select the Cancel Cancel button from the Waypoint Control Screen using your finger or by scrolling to it with the Screen Navigation button and pressing the Ok button to select it.

iTRACK

Recording an iTrack

1. Scroll through the Content Area using your finger or the Screen Navigation button to find the Record button.
Record

2. Select the Record Record button using your finger or by pressing the Ok button. The iTrack Active Band will appear in the Content Area.

3. Engage the Prop and manually navigate the desired course.

4. To Save the recording, select the iTrack Active

Band using your finger or by scrolling to it with

the Screen Navigation button and pressing

the Ok button. IT0000200163

5. Select the Stop and

Save

button

Stop and Save iTrack

from the iTrack

163 ft

Control Screen using your finger or by scrolling

to it with the Screen Navigation button and

pressing the Ok button.

Go To a Saved iTrack

1. Scroll through the Content Area using your

finger or the Screen Navigation button to

find the Go To iTrack GoTo button. iTrack

2. Select the Go To iTrack

GoTo iTrack

button using your

finger or by pressing the Ok button. A list

of iTracks that are within a quarter mile will

appear.

3. Scroll through the list of iTracks using your finger or the Screen Navigation button to find an iTrack.

4. Select the iTrack using your finger or by pressing the Ok button.

5. Decide to navigate To Start or To End and select the appropriate button using your finger or by scrolling to it with the Screen Navigation button and pressing the Ok button.

6. The iTrack Active IT0000000006

E

Band will appear in S

the Content Area.

0 ft

Disengage Go To iTrack
1. When Go To iTrack is engaged, scroll through the Content Area using your finger or the Screen Navigation button to find the iTrack Active Band.
2. Select the iTrack Active Band using your finger or by pressing the Ok button.
3. Select the Cancel Cancel button from the iTrack Control Screen using your finger or by scrolling to it with the Screen Navigation button and pressing the Ok button to select it.

NOTICE: For i-Pilot Link features that can be activated from the Humminbird, please refer to your Humminbird manual.

Scan to view the complete i-Pilot Link Owner’s Manual online.

Rev A

08/18

References

• minnkotamotors.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>