ALLSOP Solar Gem Light Instructions
- June 6, 2024
- ALLSOP
Table of Contents
ALLSOP Solar Gem Light
Congratulations on the purchase of the Solar Gem Light by Allsop Home & Garden! Setting up your Solar Gem Light is simple, follow the steps below:
Assembly Overview
-
Carefully Take Off Top Compartment
Twist Solar housing compartment counterclockwise and lift off from glass vessel. Be very careful when lifting out LED filament.
-
Slide Switch to On
On the underside of the solar housing compartment, slide the On/Off switch from the “off” position into the “on” position.
-
Put Top Compartment Back On
Twist solar housing compartment back onto the glass Gem Light vessel by rotating clockwise until it locks into the glass vessel and is secure.
-
Remove Protective Sheet
Gently remove clear protective sheet from solar panel.
-
Place/Hang Lantern Outside in Sunlight
Place Solar Gem Light on a table top or flat surface or hang as a solar pendant light. For optimum glow time be sure to place the solar Gem Light in a location where it will receive direct sunlight for 6 to 8 hrs. Designed for outdoor use.
-
Enjoy!
Documents / Resources
|
ALLSOP Solar Gem
Light
[pdf] Instructions
Solar Gem Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>