FLOVES RFCD-8006 Hair Clipper User Manual

Hair Clipper

RFCD-8006 Hair Clipper

Thank you for purchasing FLOVES Hair Clipper RFCD-8006. Please read this manual carefully before using and keep this in a safe place for future reference.

WARNING
To reduce the risk of burns, fire, electric shock, or injury to person:

• Close supervision is required when this product is used by, on, or near children, or persons with limited physical, sensory, or mental capabilities or invalids.
• Be sure to unplug the power adapter when performing maintenance.
• Do not plug or unplug the power adapter with wet hands.
• Do not modify, disassemble or repair this product by yourself.
• Please keep the product and charging cord dry.
• Do not charge if the charger is damaged.
• Use this product for its intended household use as described in this manual.

Parts Identification

Accessories

Charging

• Make sure that the trimmer is turned off.
• Wipe off any water droplets on the appliance socket.
• Fully charge before use by plugging in USB cable.
• The charging time will take about 120 minutes (the charging time is depending on the rated Voltage)

Warning

• Charge only when needed
• DO not plug in USB cable with wet hands
• DO not damage, stretch, bend, or pull the charging cable

NOTE

• You cannot operate the trimmer while charging.
• Charging or using the product at temperatures below 40° F (4.5° C) or higher than 95° F (35° C) adversely affects the lifespan of the battery.
• If the product is subjected to a major change in temperature, pressure, or humidity, let the product acclimatize for 30 minutes before use.

Mounting the attachment

Align the sides of the grooming length with the grooves on the underside of the comb and slide it into place.
Be sure to slide the comb onto the grooming head completely
*lf the attachment is not attached correctly, it may shift and end up cutting too much during use

Removing the attachment

Firmly grasp the main body with one hand, lightly pull to remove the attachment with the other hand.

HOW TO USE

1. Choose the appropriate attachment as needed.
2. Press the On/Off button to switch on the device.
3. Trim.

Cleaning, Care and Maintenance

1. Always clean shaving head regularly to ensure maximum performance and a proper operating life.
2. Never use abrasive cleaning agents or aggressive liquids such as gasoline or acetone to clean the product.
3. Do not tap the product or blade to remove remained hairs and water as this may cause damage to the product and blade.
4. Apply the oil to the blade before and after each use.
5. Make sure the product and attachments are completely dry before you store them for the next use.

Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
Note for the battery symbol (bottom symbol)
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and batteries, please take them to applicable collection points in accordance with your national legislation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>