NEOMITIS RTE7OTA Wired Digital 7 Day Programmable Smart Room Thermostat Instruction Manual
- June 10, 2024
- NEOMITIS
Table of Contents
NEOMITIS RTE7OTA Wired Digital 7 Day Programmable Smart Room Thermostat
VIEW ALL NEOMITIS THERMOSTAT MANUALS
Product Information
The RTE7OTA is a wired digital 7-day programmable smart room thermostat that is OpenTherm compatible. It comes with a wall mounting plate and requires batteries for operation. The thermostat has three wiring options: COM, NC, and NO. It also has an Optimum Start feature that prioritizes comfort and an Eco mode for energy-saving. The product also has advanced installer settings that can be accessed through a specific mode.
Product Usage Instructions
Installing Batteries
- Remove the battery cover from the back of the thermostat.
- Insert the batteries in the correct orientation.
- Replace the battery cover firmly.
Mounting of Wall Mounting Plate
- Position the wall mounting plate on the wall at the desired location.
- Mark the screw holes on the wall.
- Drill the holes and insert the wall plugs.
- Screw the wall mounting plate onto the wall.
Wiring:
The wiring should be done by a qualified electrician or other competent person. If you are not sure how to install, consult a professional.
Mounting of the Thermostat:
- Connect the wires to the appropriate terminals on the back of the thermostat.
- Mount the thermostat onto the wall mounting plate by aligning it with the pins and pushing it into place.
Please Read Before Programming the Thermostat:
The product has an Optimum Start feature that prioritizes comfort and an
Eco mode for energy-saving. In Optimum Comfort mode, priority is given to
comfort, and in Eco mode, energy-saving is prioritized. The thermostat also
has a Delayed Start mode that allows you to set a delayed start time for your
heating system.
Advanced Installer Settings
The product has advanced installer settings that can be accessed through a
specific mode. These settings allow for more customization of the product’s
features. To access the advanced installer settings, follow the instructions
provided in the manual.
Neomitis RTE7OTA 7-DAY PROGRAMMABLE SMART ROOM THERMOSTAT INSTALLATION INSTRUCTIONS