Fotodiox Warrior 100 LED Video Light User Manual
- June 9, 2024
- FotodioX
Table of Contents
Fotodiox Warrior 100 LED Video Light
Introduction
Thank you for choosing the Warrior 200/200X LED light from Fotodiox.
- High-power COB LED light source with accurate color temperature, CRI/TLCI 95 and a working life of more than 50,000 hours.
- Flicker-free and uniformly dimmable from 0%-100% due to the PWM integrated design.
- 11 pre-installed special effects with adjustable brightness, color temperature and speed to help create the perfect scene.
- Built-in NTC temperature detection to automatically control the fan and prevent overheating to ensure a long product life.
- The color LCD displays accurate real-time data.
- Designed with a high-strength aluminum shell for durability and enhanced heat dissipation to help ensure a long product life.
- Low heat LED technology provides stable, consistent, and accurate lighting under varying conditions.
- Mobile APP compatible for convenient and fast control.
- Two versions available; Warrior 200 daylight version and 200X adjustable bi-color version (2700K-6500K).
- Bi-color design is adjustable from 2700K to 6500K.
- Suitable for indoor or outdoor photography and videography. Great for studio or location shoots including TV, film, streaming, portrait photography and more.
Warnings
-
Do not disassemble of modify the light.
-
Do not operate with wet hands, doing so may cause electric shock.
-
Do not operate in environments near flammable gasses or volatile liquids as this may increase the risk of explosion/fire.
-
Do not operate in enclosed spaces where heat buildup can be extreme, such as a car on a sunny day. The increased heat may cause premature failure of the lighting unit.
-
Do not touch the plug or AC adapter with wet hands; doing so may cause electric shock.
-
Do not damage, disassemble, pull or twist the power cord, otherwise it may cause fire or electric shock.
-
Do not place under heavy objects.
-
Avoid dust and debris buildup on the light surface as this will change illuminance and color temperature.
-
Keep the light surface clean with a soft, dry cloth.
-
Use ONLY the provided AC power adapter; using other AC power adapters may result in damage to the light. Should you need a replacement please contact
techsupport@fotodiox.com -
When using accessories please ensure that these are installed properly to avoid damage to the light or other safety issues caused by falling accessories.
-
Please loosen the adjustment & locking handle before adjusting the angle of the lamp body.
Parts Identification
- LCD
- DC power input socket
- Stand mount locking screw
- Integrated carrying handle
- Selector knob (with push button functionality)
- Mode switch knob
- Power ON/OFF button
- Angle adjustment & locking handle
- Bowens accessory mount
- Bowens mount accessory lock button
User
Lamp Installation
- Loosen the stand mount locking screw by turning counterclockwise. Place the mount on the light stand and secure theScrew by turning clockwise. Please ensure the light is fully mounted onto the support and the screw is securely fastened.
- To adjust the light to the desired angle, turn the angle adjustment & locking handle counterclockwise to loosen. Move the light to the desired position, then tighten the angle adjustment a locking handle by turning clockwise.
Placing the power adapter
Use the safety cable to hand the power adapter on the light support.
Power supply
Connect the power adapter to the light fixture by inserting the power adapter
plug into the DC power input socket on the lower left corner of the light
fixture. Connect the AC power cable to the external AC power (AC100-240V).
Power ON/OFF
Press the power button to turn the light on. The LCD will provide relevant
data, turn the mode switch knob to see data for brightness, color temperature,
special effects, language, and address.
Brightness/Color Temperature Mode
Turn the mode switch knob to enter brightness/color temperature interface, and short press the selector knob to switch between brightness and color temperature modes. Turn the selector knob to adjust brightness from 0-100% or color temperature from 270OK- 6500K (Warrior 200X only). ****
FX Mode
Turn the mode switch knob to enter the special effects interface. Short press
the selector knob to switch between brightness, color temperature (200X only),
FX mode and speed settings; turn the selector knob to adjust the desired
setting.
Brightness and speed are adjustable 0-100%. Color temperature is adjustable
2700K-6500K (200X only).
The brightness and speed adjustment range is 0-100%. The color temperature
adjustment range is 2700K-6500K. The special effect modes include lightning,
fireworks, strobe, breathing, cop car, SOS, fault light, turn signal,
paparazzi, screen, H&L beam.
Language Mode
Turn the mode switch knob to enter the language interface, then turn the
selector knob to switch between Chinese and English
Remote control Mode
Turn the mode switch knob to enter the address interface, rotate the selector
knob to adjust the remote control address 1-12.
Noted : RMT-OFF means that the remote control function can not be used.
How to use Lishuai APP
Download the Lishuai APP by scanning the appropriate QR code below, searching Lishuai in the iOS APP store or downloading the Android APP from www.fotodioxpro.com
- Open the APP, select Cool cam then select model 200D/200X; click to search device and enter the control interface.
- Set the APP address to the same address as the light. The APP address can be set 1-12.
- Now the light can be controlled by the mobile APP. The brightness, color temperature, special effects, language, and APP address can be adjusted.
Product specifications
Product specifications are based on testing our laboratory samples. The product may vary slightly, however these variations will not affect normal use. The design and specifications are subject to change without notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>