CTEK NJORD GO Type 2 Portable Charger with Red CEE User Guide

**CTEK NJORD GO Type 2 Portable Charger with Red CEE User Guide

**

CONNECT

1. Plug NJORD® GO into the supply outlet
   

2. Connect the NJORD® GO to the vehicle
   

CONNECT WITH CTEK APP (OPTIONAL)

FOR ADDITIONAL FUNCTIONALITY

1. Download the CTEK App from App Store or Google Play for additional functionality

2. Plug NJORD® GO into the supply outlet
   

3. Connect the NJORD® GO to the CTEK App within 2 minutes.
   

4. Connect the NJORD® GO to the vehicle
   

CHARGE

1. NJORD® GO is powered on, waiting to charge
   

2. Vehicle is charging
   

3. Vehicle is charged / vehicle has paused charging
   

4. NJORD® GO requires authorisation from CTEK App or charging session was paused via CTEK App

OTHER INFO

Bluetooth® pairing mode (flashing) or CTEK App is connected via Bluetooth® (single flash)

Remote connection active (single flash)

NJORD® GO is downloading an update (solid) or NJORD® GO is installing an update (flashing)

ERRORS

ERROR: Charging is not available (contact CTEK)

ERROR: self-check fail (restart NJORD® GO, if persists, contact CTEK)

ERROR: Ground fault detected (restart NJORD® GO, if persists, contact CTEK)

ERROR: Temperature limit reached (leave to cool down)

Discover more about NJORD® GO

Users can contact CTEK via CTEK App or on support.ctek.com

References

• Customer Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>