FIXED FIXGRA2 Graphite Pro active stylus User Manual
- June 10, 2024
- FIXED
Table of Contents
FIXED FIXGRA2 Graphite Pro active stylus
Product Information
The FIXED Graphite Pro is an active touch stylus designed for Apple iPad 6th generation and newer tablets. It is extremely accurate to a single pixel and has zero response lag. The stylus simulates writing and drawing as if on paper, and the palm of the hand can be naturally placed on the touch screen without the display reacting to it. The stylus has magnets in it for attaching the stylus to the tablet body. The smart stylus tip allows you to tilt the tip for a stronger or weaker line. The battery life of the stylus reaches up to 10 hours of operation. The package includes two replaceable tips.
Product Usage Instructions
1. To switch on the stylus, click on the top button. The white LED flashes to indicate switching on. The stylus automatically switches off after 5 minutes of non-use.
2. Thanks to the magnets, you can attach and charge the stylus to the body of your tablet, just like the original Apple Pencil.
3. The stylus has a replaceable tip. To replace it, unscrew it and screw in a new one.
4. Double-clicking the top button will return you to the home screen of your iPad.
Note: The FIXED Graphite Pro stylus works with all Apple iPad tablet models from 2018 onwards with Apple Pencil 1 and Apple Pencil 2 support.
INTRODUCTION
Thank you for purchasing the FIXED Graphite Pro active stylus. Active touch stylus designed for Apple iPad 6th generation and newer tablets. The stylus is extremely accurate to a single pixel and has zero response lag. Graphite Pro perfectly simulates writing and drawing as if on paper, and the palm of the hand can be naturally placed on the touch screen without the display reacting to it. The FIXED Graphite Pro stylus has magnets in it for attaching the stylus to the tablet body. With the smart stylus tip, you only need to tilt the tip for a stronger or weaker line. The battery life of the stylus reaches up to 10 h of operation, to start the stylus, just press the top button, and the stylus is immediately usable for your work. A double press of the top button returns you to the home screen of your iPad.
Read this manual before use.
PRODUCT DESCRIPTION
- On button.
- LED
- Magnets for attaching to iPad and charging surface
- Interchangeable tip
COMPATIBILITY
The FIXED Graphite Pro stylus works with all Apple iPad tablet models from 2018 onwards with Apple Pencil 1 and Apple Pencil 2 support.
USAGE
- Open Settings – Bluetooth – Turn on your iPad and locate your FIXED Graphite Pro and click connect.
- Long tap on the screen to add a widget to the screen to see real-time battery capacity.
- Click on the top button to switch on the stylus, and the white LED flashes to indicate switching on. The stylus automatically switches off after 5 minutes of non-use.
- Thanks to the magnets, you can attach and charge the stylus to the body of your tablet, just like the original Apple Pencil.
- The stylus has a replaceable tip, to replace it unscrew it and screw in a new one. There are 2 PCs in the package.
- Double-clicking the top button will return you to the home screen.
INDICATING DIODE
Switching on: 1x flash of white colour Charging start: 2x flashing white Low
battery 20% or less: 1x red flash in one minute.
CHARGING
To charge, place the stylus with the straight edge against the right edge of the iPad.
Note: iPad wireless charging is available on iPad that supports Apple Pencil 2 charging.
- 12.9-inch iPad Pro (3rd generation, release year 2018 and later)
- 11-inch iPad Pro all generations (2018 and later)
- 10.9-inch iPad Air 2020 (4th and 5th generation)
- iPad mini 6th generation
PRODUCT DETAIL
- Material: ABS
- Input: 5V 0,2A
- Dimensions: 165x9x8mm
- Weight: 15g
- Frequency:
- Battery: Li-ion 3.7V, 125mAh, 0.463Wh
PACKAGE CONTENTS
- 1x FIXED Graphite Pro stylus
- 2x interchangeable tip
- 1x user manual
NOTES
The product is warranted according to the legal regulations in force in the
countries where it is sold. In case of service problems, please contact the
dealer from whom you purchased the equipment. FIXED assumes no responsibility
for damages caused by improper use of the product.
PRODUCT CARE AND MAINTENANCE
If the device is not used for an extended period of time, it is necessary to charge the battery every two to three months to prevent damage and to ensure that the performance of the device is not reduced. Use a soft cloth to clean the stylus’s body.
SECURITY MEASURES
Do not expose the device to rain or snow or immerse it in water. Do not leave
the stylus in the car in the sun. Do not expose the device directly to
sunlight or leave it near heat sources. Do not use the stylus if it has been
heavily bumped, dropped, or damaged in any way. Do not disassemble the device,
there is a risk of electric shock and/or burns. Keep the stylus out of the
reach of children. Unauthorized opening or modification of product parts will
result in forfeiture of the warranty.
- Storage temperature: 0 to 35
- Operating temperature: 0 to 40
TROUBLESHOOTING
If you have any problems with your product, you can contact our support at www.fixed.zone/podpora.
(Applies in countries with separate collection systems for recyclable materials). Old products must not be disposed of with household waste! If the product no longer works, dispose of it in accordance with the applicable regulations in your country. This ensures that old products are recycled in a professional manner and also eliminates negative environmental consequences. For this reason, electrical equipment is marked with the symbol shown here. This product is CE marked in accordance with EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU. FIXED.zone a.s. hereby declares that this product complies with the essential requirements and other relevant provisions of the EMC 2014/30/EU and 2011/65/EU Directives. zv.
FIXED.zone a.s.
- Kubatova 6
- České Budějovice 37004
- Czech Republic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>