PRIVORO SafeCase Galaxy S22 Privacy Case User Manual

June 10, 2024
PRIVORO

SafeCase Galaxy S22 Privacy Case

SafeCaseTM Galaxy S22

User Manual

SafeCase is a protective case for Galaxy S22 that provides audio
and cellular protection. The product comes with a USB to USB-C
charging cable that charges both SafeCase and Galaxy when connected
to a power source.

Table of Contents

  • Section 1: About SafeCase
    • SafeCase Parts and Accessories
  • Section 2: Setting up SafeCase
    • Step 1: Prepare SafeCase and Galaxy
    • Step 2: Pair SafeCase and the Privoro App
  • Section 4: Controlling Your Phone’s Cellular Radio
  • Section 5: Using the Privoro App
    • Verify Audio Masking
  • Section 6: Managing Power
    • Power On/Off
    • Check Battery Status

About SafeCase

SafeCase parts and accessories:

  • Charging Cable (USB to USB-C)
  • Corner Indicator LEDs
  • Push-to-talk Button
  • Tray Base Tray
  • Latch Slide
  • Battery Status LED
  • Power Button
  • Touch Bar Center Button
  • USB-C Port

SafeCase parts and their main functions:

  • Charging Cable (USB to USB-C) charges both SafeCase and Galaxy
    when connected to a power source.

  • Corner Indicator LEDs display the charging status of
    SafeCase.

  • Push-to-talk Button activates audio masking mode.

  • Tray Base Tray holds Galaxy in place.

  • Latch Slide locks the Tray Base Tray in place.

  • Battery Status LED displays the battery level of SafeCase.

  • Power Button turns SafeCase on and off.

  • Touch Bar Center Button is used to interact with the Privoro
    App.

  • USB-C Port is used to charge SafeCase.

Setting up SafeCase

Step 1: Prepare SafeCase and Galaxy

  1. Connect SafeCase to a power source using the charging cable
    (USB to USB-C).

  2. Turn on Bluetooth on your Galaxy S22 by following these steps:

  3. Open the Settings app.

  4. In the Settings app, tap the Connections field.

  5. On the Connections screen, toggle the Bluetooth switch to the
    right (on) position.

  6. Remove any protective cases or screen protectors from your
    Galaxy. Protective cases and screen protectors may prevent your
    Galaxy from fitting into the device and may disrupt audio
    protections.

Step 2: Pair SafeCase and the Privoro App

  1. Download and install the Privoro App on your Galaxy S22 by
    following these steps:

  2. Open the Play Store on your Galaxy.

  3. Search for Privoro App.

  4. In the app listing, tap the Install button to download and
    install.

  5. Once installed, open the Privoro app by tapping the Open button
    (or by tapping the Privoro icon on your home screen).

  6. Agree to the End User License Agreement (EULA) and the Terms
    and Conditions by tapping the appropriate option. Tap the Agree
    & Continue button to proceed.

Controlling Your Phone’s Cellular Radio

You can control your phone’s cellular radio using the Privoro
App.

Using the Privoro App

Verify Audio Masking

Audio masking mode can be activated by pressing the Push-to-talk
Button on SafeCase or from within the Privoro App. Verify that
audio masking is active by checking for the Audio Masking icon on
your phone’s screen.

Managing Power

Power On/Off

To turn SafeCase on or off, press and hold the Power Button for
three seconds.

Check Battery Status

The Battery Status LED on SafeCase displays the battery level of
SafeCase. Press the Touch Bar Center Button to see the battery
level.

SafeCaseTM Galaxy S22
User manual
PMR0I 0V 1O0R O . C O M

TABLE OF CONTENTS
Section 1: About SafeCase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SafeCase Parts and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Section 2: Setting Up SafeCase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Step 1: Prepare SafeCase and Galaxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Power SafeCase On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Remove Galaxy Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Turn On Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Step 2: Pair SafeCase and the Privoro App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Download/Install and Open the Privoro App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Choose App Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Scan the SafeCase QR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Pair Devices Without Camera Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Turn off Battery Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Step 3: Insert the Galaxy into SafeCase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Section 3: Managing Audio/Video Surveillance Protections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Protected Mode: For Full Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Maintain Protected Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Revert to Protected Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Unprotected Mode: For Phone/Video Calls and Audio/Image Capture . . . . . . . . . . . . . . . . . . . . . 10 Use the Touch Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Audio Passthrough Mode: For Bixby/Google Assistant and Audio Memos . . . . . . . . . . . . . . . . . . 11 Use the Push-to-Talk Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Checked-In Mode: For Full Protection Within a Sensitive Location . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Section 4: Controlling Your Phone’s Cellular Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Section 5: Using the Privoro App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Verify Audio Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Section 6: Managing Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Check Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Via the Privoro App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Via SafeCase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Section 7: Adjusting Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Adjust LED Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Section 8: Removing the Galaxy from SafeCase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Appendix A: User Interface Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Appendix B: Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Appendix C: Safety and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Appendix D: Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Appendix E: Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PRIVORO.COM

SECTION 1
About SafeCase
SafeCase is a first-of-its-kind security device for mobile devices that enables unique data protections and high-security services alongside your smartphone. Integrated within SafeCase are protections against audio and video surveillance resulting from the remote hijacking of your smartphone’s cameras and microphones. Audio capture is prevented via randomized audio masking for each of your smartphone’s microphones, while image/video capture is prevented via a physical barrier that blocks the cameras.
SafeCase parts and accessories
SafeCase ships with a USB to USB-C charging cable which, when connected to a power source, charges both SafeCase and Galaxy.
CHARGING CABLE

SECTION 1.01

PRIVORO.COM

FRONT

CORNER INDICATOR LEDS

BACK

PUSH-TO-TALK BUTTON

T R AY BASE TRAY

LATCH SLIDE
BATTERY STATUS LED
POWER BUTTON

TOP

BOTTOM
TOUCH BAR CENTER BUTTON

USB-C PORT

SafeCase parts and their main functions
C O R N E R I N D I C A T O R L E D S Indicate when audio/video surveillance protections are engaged and disengaged P U S H -T O -T A L K B U T T O N Enables temporary audio passthrough while maintaining video surveillance protections T R AY Interior of SafeCase where Galaxy rests in place B A S E T R AY Slides open/closed to enable Galaxy insertion/removal T O U C H B A R Controls how audio/video surveillance protections are engaged and disengaged C E N T E R B U T T O N Controls the paired Galaxy’s cellular radio L A T C H S L I D E Unlocks the base tray B A T T E R Y S T A T U S L E D Indicates battery charge level P O W E R B U T T O N Controls power on/off, battery status and LED brightness U S B – C P O R T For charging SafeCase and Galaxy via charging cable

SECTION 1.02

PRIVORO.COM

SECTION 2
Setting up SafeCase

Step 1: Prepare SafeCase and Galaxy

POWER SAFECASE ON
SafeCase is in shipping mode when it arrives. To power it on for the first time, connect SafeCase to a USB power source ­ either a standard USB power adapter (5V/2A minimum) or your computer ­ using the charging cable provided, with the USB-C end inserted into SafeCase.

Connect SafeCase to a power source

USB POWER ADAPTER (5V/2A) (not included)

TURN ON BLUETOOTH
As communication between SafeCase and the Privoro app occurs over a Bluetooth connection, ensure your Bluetooth is turned on. Do so using the following steps:
1. Open the Settings app.
2. In the Settings app, tap the Connections field.
3. On the Connections screen, toggle the Bluetooth switch to the right (on) position.

USB END
REMOVE GALAXY ACCESSORIES Remove any protective cases or screen protectors from your Galaxy. Protective cases and screen protectors may prevent your Galaxy from fitting into the device and may disrupt audio protections.

Toggle Bluetooth on

Remove screen protectors

SECTION 2.03

PRIVORO.COM

Step 2: Pair SafeCase and the Privoro App
To enable notifications, audio masking verifications, firmware updates and more, you’ll need to pair your SafeCase to the Privoro app.
DOWNLOAD/INSTALL AND OPEN THE PRIVORO APP
On your Galaxy, download the Privoro app from the Play Store using the following steps:
1. Open the Play Store on your Galaxy.

4. In the app listing, tap the Install button to download and install.
5. Once installed, open the Privoro app by tapping the Open button (or by tapping the Privoro icon on your home screen).
Once the app has been opened for the first time, a setup assistant will display. Before agreeing to the End User License Agreement (EULA) and the Terms and Conditions, you can open each by tapping the appropriate option. Tap the Agree & Continue button to proceed.

2. In the Play Store app, enter Privoro in the search field.
3. Once the Privoro app is displayed, tap it to open the app listing.

Tap the Install button

Tap Tap the Agree & Continue button

SECTION 2.04

PRIVORO.COM

CHOOSE APP SETTINGS
You will then be prompted to grant access to two Galaxy services: Location (necessary for facilitating policy management) and Camera (necessary for scanning the device’s QR code). You may change these settings at any time from the Settings app on your Galaxy.

1. Location settings: First, tap the Go anywhere field. When prompted to allow the app to access your location, tap the Allow only while using the app option.

Tap the Go Anywhere field
2. Camera settings: Next, tap the Scan and pair field. When prompted to allow the app to access your camera, tap the Allow option. Once access has been granted, tap the Next button.

Tap the Allow while using the app option

Tap the Scan and pair field
SECTION 2.05

Tap the Allow option

Tap the Next button
PRIVORO.COM

SCAN THE SAFECASE QR CODE
After choosing your app settings, a QR code scanner will open within the app. Hold your Galaxy’s rear-facing camera over the QR code printed on your SafeCase until the code is centered within the guidelines on the screen. Upon successful scanning, you will receive a confirmation message that you have successfully paired your SafeCase and app.

Scan the QR code printed on your SafeCase
PAIR DEVICES WITHOUT CAMERA FUNCTIONALITY
Alternatively, you may select your device’s SafeCase ID from a list. On the QR code scanner, tap the select from a list option, opening a selection screen. Tap your device’s SafeCase ID, which can be found in the MAC field on the label on the tray. You will receive a confirmation message that you have successfully paired your SafeCase and app.
Tap the Done button to close the setup assistant.

Confirmation message

Tap the SafeCase ID

Tap the select from a list option
SECTION 2.06

Tap the Done button
PRIVORO.COM

TURN OFF BATTERY OPTIMIZATION
After pairing, you will be prompted to turn off battery optimization for the Privoro app, which will enable the app to operate effectively in the background.
1. In the Battery Optimization prompt, tap the Settings option.
2. On the Optimize battery usage screen in the Settings app:

a. Tap the filter dropdown menu (currently displaying “Apps not optimized”) and then select All.
b. Scroll down or search to find the Privoro app.
c. Once the Privoro app is displayed, toggle the optimization switch to the left (off) position.

Tap the Settings option

Select the All option

Toggle battery optimization off

SECTION 2.07

PRIVORO.COM

Step 3: Insert the Galaxy into SafeCase
Insert your Galaxy into SafeCase using the following steps:

1. Unlock the base tray: Use your finger to pull the latch slide to the left (looking at the back side), unlocking the base tray.

Unlock the base tray

Slide the base tray open
3. Insert the Galaxy into the tray: Align your Galaxy’s USB-C port over SafeCase’s USB-C connector while tucking the bottom of your Galaxy into the base tray and then rest your phone onto the tray.

2. Slide the base tray open: Gripping the sides of the base tray with one hand, slide the base tray until it’s fully extended.
1 2
Insert the Galaxy into the tray

SECTION 2.08

PRIVORO.COM

Push the base tray closed

4. Push the base tray closed: Push up from the bottom of the base tray until it clicks into place. You can verify that the base tray is closed by inspecting the latch slide, which should be all the way in the right position, with no red visible on the latch.

Verify that the latch slide is locked into position

SECTION 2.09

PRIVORO.COM

SECTION 3
Managing audio/video surveillance protections
When SafeCase is powered on, audio/video surveillance protections are automatically engaged; this is the default mode, known as protected mode. In addition to protected mode, there are two additional modes: unprotected mode (used when capturing images/audio and placing/ receiving phone/video calls) and audio passthrough mode (for using your voice assistant or recording audio memos with video protections still engaged).

PROTECTED MODE: FOR FULL PROTECTION
Protected mode is the default audio/video surveillance protection mode. In this state:
· The audio masking and camera blocking features are engaged.
· The corner indicator LEDs pulse green every 10 seconds.
It is normal to hear a soft white noise coming from SafeCase when in protected mode, a result of the audio masking adapting to the noise level in the environment surrounding SafeCase/Galaxy. While in protected mode, most phone features ­ including apps, videos, emails, music and text messages ­ can still be accessed.
MAINTAIN PROTECTED MODE
To maintain protected mode, simply keep SafeCase powered on.
REVERT TO PROTECTED MODE
To change from unprotected mode (see: next section) back to protected mode, quickly swipe right (with the phone facing you) across the touch bar, from the unlocked icon to the locked icon. As the camera shutter closes, an ascending audio tone will play and the corner indicator LEDs will blink green five times.

UNPROTECTED MODE: FOR PHONE/VIDEO CALLS AND AUDIO/IMAGE CAPTURE
Temporarily changing to unprotected mode is necessary for capturing images/audio and placing/receiving phone/video calls. In this state:
· The audio masking and camera blocking features are disengaged.
· The corner indicator LEDs pulse red every three seconds.
Entering unprotected mode must take place before capturing images/audio; otherwise, the recorded photos, videos and audio will be indecipherable. Similarly, entering unprotected mode must take place before placing/ receiving a phone/video call; otherwise, the other participant(s) in the call will not be able to understand what you’re saying.
USE THE TOUCH BAR
To change to unprotected mode, quickly swipe left (with the phone facing you) across the touch bar, from the locked icon to the unlocked icon. As the camera shutter opens, a descending audio tone will play and the corner indicator LEDs will blink red five times.

Quickly swipe right across the touch bar SECTION 3.10

Quickly swipe left across the touch bar
To change back to protected mode after the call/capture, quickly swipe right across the touch bar, from the unlocked icon to the locked icon.
PRIVORO.COM

AUDIO PASSTHROUGH MODE: FOR BIXBY/GOOGLE ASSISTANT AND AUDIO MEMOS
Temporarily changing to audio passthrough mode allows you to leave camera/video protections engaged while using Bixby/ Google Assistant (or another voice assistant) or recording audio memos. In this state:
· The audio masking feature is disengaged while the camera blocking feature remains engaged.
· The corner indicator LEDs pulse red every three seconds.
USE THE PUSH-TO-TALK BUTTON
To change to audio passthrough mode, press and hold the push-to-talk button. When first pressed, the corner indicator LEDs will blink red five times and a confirmation tone will play. After the tone, begin your voice action.
When using Bixby/Google Assistant, for best results keep holding the push-to- talk button until the voice assistant has finished responding.
When you have completed your voice action, release the button (and change back to protected mode). The corner indicator LEDs will blink green five times.
CHECKED-IN MODE: FOR FULL PROTECTION WITHIN A SENSITIVE LOCATION
If required by your organization, checked-in mode applies to phone usage within facilities where sensitive information is shared. Checked-in mode effectively keeps your SafeCase in protected mode while also disabling access to both the camera shutter and audio passthrough mode. In this state:
· The audio masking and camera blocking features are engaged.
· The corner indicator LEDs pulse blue every 10 seconds.
· The camera shutter is disabled. · Audio passthrough mode is disabled. · Adjusting LED brightness is disabled.
To check into a facility, doubleclick the push-to-talk button.
To check out of the facility, again doubleclick the push-to-talk button. Your SafeCase will resume protected mode. The corner indicator LEDs will blink green five times.
SECTION 3.11

Press and hold the push-to-talk button
Double-click the push-to-talk button
PRIVORO.COM

SECTION 4
Controlling your phone’s cellular radio
Privoro and Samsung have developed a secure, hardware-to-hardware integration that enables you to use your SafeCase to control the cellular radio on your paired Galaxy S22. This feature is designed to prevent any malware on your phone from manipulating radio controls.

To turn off your Galaxy’s cellular radio via SafeCase, press and hold the center button on top of SafeCase for three seconds, until a three-beep audio tone plays.
If successful:
· Your S22 will reboot with the cellular radio turned off. A symbol will appear in place of the cellular signal strength indicator in the top right area of the screen.
· After the S22 and SafeCase re-pair, the corner indicator lights on SafeCase will briefly flash purple after pulsing green, red or blue to indicate the current mode.
Similarly, to turn your Galaxy’s cellular radio back on, press and hold the center button on top of SafeCase for three seconds, until a three-beep audio tone plays.
If successful:
· Your S22 will reboot with the cellular radio turned on. Your cellular signal strength indicator will reappear in the top right area of the screen.
· After the S22 and SafeCase re-pair, the corner indicator lights on SafeCase will no longer briefly flash purple.

Push and hold the center button
Cellular radio is turned off
The corner indicator lights will briefly flash purple after pulsing

SECTION 4.12

PRIVORO.COM

SECTION 5
Using the Privoro app
The Privoro app serves two critical functions: it provides a user interface for SafeCase and it creates a communications channel between SafeCase and the cloud. For SafeCase to maintain its cloud connection, the Privoro app must be running in the background and Bluetooth must remain on.

From the home (My SafeCase) screen of the app, you can quickly check your connection status and battery level.
PRIVORO APP’S MY SAFECASE SCREEN
Cloud connection status Current SafeCase battery level Navigation guide

NAVIGATION GUIDE

My SafeCase

Displays the current SafeCase connection status (between Galaxy/SafeCase and cloud), battery charge level and firmware version

Verification

Provides an interface for validating the audio masking functionality of your SafeCase

Help

Provides tools and tips to help you maximize SafeCase features

Settings

Displays your current connection details and cloud environment

VERIFY AUDIO MASKING The Privoro app allows you to verify audio masking for each of your Galaxy’s microphones. In the app, tap the Verification icon. If using masking verification for the first time, you will be prompted to allow the app to access your Galaxy’s microphones, which is necessary for verifying audio masking. Tap the Allow option.
SECTION 5.13

Tap the icon for Verification

Tap the Allow option
PRIVORO.COM

In the Verification screen:
1. If not already selected, tap the option for the microphone you’d like to test (Top Mic or Bottom Mic), and then tap the Start Recording button.

2. While recording:
a. You can monitor the shape of the audio waveform captured on the screen. In protected mode, the waveform should maintain its general shape in the presence of environmental noise, signifying a constant audio masking noise produced by SafeCase.
b. You can introduce noise into your environment (by speaking or making other sounds) to test the audio masking.
c. You can switch between protected mode and unprotected mode to highlight the differences between the two modes.

Select the microphone to test and tap the Start Recording button

Monitor the audio waveform

SECTION 5.14

PRIVORO.COM

3. When finished recording, tap the Stop Recording button.
Tap the Stop Recording button
4. Tap the playback icon to listen to the recording. Audio captured while in protected mode should be unintelligible ­ only audio masking noise will be heard.
Tap the playback icon

SECTION 5.15

PRIVORO.COM

SECTION 6

Managing power

POWER ON/OFF
To power off SafeCase, press and hold the power button for five seconds. After releasing the button, the corner indicator and power button LEDs will blink white five times; if in unprotected mode, SafeCase will revert to protected mode, closing the camera shutter.
Similarly, to power on SafeCase, press and hold the power button for three seconds, until the corner indicator LEDs and battery status LED (and power button) blink white.
SafeCase can also be turned on by connecting the device to a power source using the included charging cable.

CHECK BATTERY STATUS There are two ways to check SafeCase battery level: via the app or via the battery status LED.
VIA THE PRIVORO APP You can check current charge level on the My SafeCase screen of the Privoro app.

Check current charge level

Press and hold the power button for five seconds
SECTION 6.16

PRIVORO.COM

VIA SAFECASE
To check the current charge level via SafeCase, press the power button. The battery status LED (and power button) will illuminate to show the current charge level. The color of the battery status LED corresponds to the percentage of charge that remains, from green (high) to yellow (moderate) to red (low).

Color of battery status LED Green Yellow Red

Charge level High Medium Low

LED color corresponds to the percentage of charge that remains

Press the power button
CHARGE Included with SafeCase is a charging cable (USB to USB-C), allowing you to simultaneously charge your SafeCase and Galaxy. To charge both devices, plug the USB-C end of the cable into SafeCase and the USB end into a standard USB power adapter (5V/2A minimum) or your computer. In the first 30 seconds of charging, the battery status LED (and power button) will pulse to indicate the current charge level.
SECTION 6.17

Connect SafeCase to a power source

USB END

USB POWER ADAPTER (5V/2A) (not included)

CHARGING CABLE

USB-C END

PRIVORO.COM

Adjusting settings

SECTION 7

ADJUST LED BRIGHTNESS
To adjust the brightness of the corner indicator LEDs and battery status LED, double-click the power button to enter LED adjust mode, and then press the power button one or more times to cycle through the brightness settings ­ high, low and off ­ until the desired setting is reached. With each press of the power button, the corner indicator LEDs and battery status LED (and power button) will illuminate to the current brightness level and a single-beep audio tone will play. After two seconds, a confirmation tone will play and the brightness level will set.

Double click the power button and then press to cycle

SECTION 7.18

PRIVORO.COM

SECTION 8
Removing the Galaxy from SafeCase
To remove your Galaxy from SafeCase, use the following steps:

1. Unlock the base tray: Use your finger to pull the latch slide to the left (looking at the back side), unlocking the base tray.

Unlock the base tray

Slide the base tray open

2. Slide the base tray open: Grip the sides of the base tray and slide it open. If the Galaxy remains in place, slide it all the way down until it meets the opened base tray.

3. Remove the Galaxy from the tray: Slightly lift the Galaxy off the tray, then gently pull the phone (from the bottom half) off the USB-C connector.
To insert your Galaxy back into SafeCase, use the same steps taken during setup (Section 2.08).

2 1
Remove the Galaxy from the tray

SECTION 8.19

PRIVORO.COM

APPENDIX

Appendix A: User interface summary

GOAL

ACTION

NOTIFICATION

Changing to protected mode (from unprotected mode)

Quickly swipe right across the touch bar

As camera shutter closes, ascending audio tone plays and corner indicator LEDs blink green five times
In protected mode, corner indicator LEDs pulse green every 10 seconds

Changing to unprotected mode (from protected mode)

Quickly swipe left across the touch bar

As camera shutter opens, descending audio tone plays and corner indicator LEDs blink red five times
In unprotected mode, corner indicator LEDs pulse red every three seconds

Changing to audio passthrough mode (from protected mode)

Press and hold the push-to-talk button

When push-to-talk button is first pressed, corner indicator LEDs blink red five times and a confirmation tone plays
In audio passthrough mode, corner indicator LEDs pulse red every three seconds

Checking into a facility

Double-click the push-to-talk button

In checked-in mode, corner indicator LEDs pulse blue every 10 seconds

Checking out of a facility

Double-click the push-to-talk button

Corner indicator LEDs blink green five times

Turning off Galaxy’s Press and hold the

cellular radio

center button for

three seconds

Three-beep audio tone plays
After the SafeCase and S22 re-pair, corner indicator LEDs briefly flash purple after pulsing green, red or blue to indicate the current mode

Turning on Galaxy’s cellular radio

Press and hold the center button for three seconds

Three-beep audio tone plays

Powering on

Press and hold the power button for three seconds

Corner indicator LEDs and battery status LED (and power button) blink white

Powering off

Press and hold the power button for five seconds

When power button is pressed, beeping audio tone plays After button is released, corner indicator LEDs blink white five times If in unprotected mode, camera shutter closes

Checking battery status

Press the power button

Battery status LED (and power button) illuminate to indicate the current charge level for three seconds

Charging

Connect SafeCase to a power source using the charging cable

Battery status LED (and power button) pulse to indicate the current charge level
When charging cable is disconnected, descending audio tone plays

Checking LED brightness

Double-click the power button

Three-beep audio tone plays
Corner indicator LEDs and battery status LED (and power button) illuminate to the current brightness level for five seconds

Adjusting LED brightness

After double-clicking the power button, press one or more times to cycle through the three brightness settings: high, low and off

Single-beep audio tone plays at each setting
Corner indicator LEDs and battery status LED (and power button) illuminate to the current brightness level

APPENDIX

PRIVORO.COM

Appendix B: Technical specifications

Size and weight · Height: 179 mm · Width: 72 mm · Depth: 22 mm · Weight: 130 g
Connectivity · Bluetooth · NFC (tag only)
Audio · Digital signal processor for optimum audio
quality and secure voice masking · Masks speech intelligibility up to voice level of 90 dBA1 · Masks speech presence up to voice level of 80 dBA1

Battery and battery life · Protected mode: Up to 20 hours · Charge time: Up to 80% power level in two hours2
Electrical ratings · 3.8V, 2,000 mAh lithium-ion battery · Maximum input current: 1900mA · Rated voltage: 5VDC
Environmental requirements · Operating temperature: -4° and 113° F (-20° and 45° C) · Relative humidity: Up to 95% · Operating altitude: Up to 10,000 feet (3000 m)
1 Tested one meter from audio source. 2 Tested with 1-Amp charging supply (DCP) on the battery at 3% of its full capacity.

Appendix C: Safety and handling
WARNING: Follow these safety instructions to avoid fire, electric shock, injury, damage to SafeCase or other property.

Handling Handle the SafeCase with care. The SafeCase contains a lithium-ion battery, metal, plastic and electronic components. To avoid damage to the SafeCase and the battery, take care not to puncture, drop, burn or crush the SafeCase. The SafeCase is not water-resistant or waterproof. Avoid exposing the SafeCase to excessive moisture or liquid. Should the SafeCase become damaged, discontinue use.
Repair Do not attempt to open or repair the SafeCase. Opening the SafeCase will invalidate any and all warranties.
Battery Do not attempt to change the SafeCase battery. Improper replacement of the battery could result in fire, overheating and injury. Attempting to replace the battery will invalidate any and all warranties. The lithium-ion battery in your device should be serviced or recycled by Privoro or an authorized service provider and must be recycled or disposed of separately from household/municipal waste.
Charging The SafeCase comes with a charging cable: USB-A to USB-C (charge only). For optimal charging it is recommended you use a Privoro SafeCase charging cable. SafeCase has a maximum input current of 1900mA. Using damaged cables or charging when moisture is present can cause fire, electric shock, injury or damage to SafeCase or other property.
CHARGING CABLE

Operating temperature
The SafeCase is designed to work in ambient temperatures between -4° and 113° F (-20° and 45° C). The SafeCase may be damaged and battery life shortened if stored or operated outside of these temperature ranges. SafeCase may be used in tropical climate regions.
SafeCase battery charging may be limited if the interior temperature of the SafeCase exceeds normal operating temperatures (for example, in a hot car or in direct sunlight for extended periods of time).
Radio frequency (RF) interference
Observe signs and notices that prohibit or restrict the use of electronic devices (for example, in healthcare facilities or blasting areas). Although SafeCase is designed, tested and manufactured to comply with regulations governing radio frequency emissions, such emissions from SafeCase can negatively affect the operation of other electronic equipment, causing them to malfunction. When use is prohibited, or when asked to do so by authorities, turn off SafeCase to turn off its wireless transmitters.
Using the Galaxy
The SafeCase works with the Galaxy S22. While using SafeCase, follow all of the Galaxy safety and handling instructions, which can be found at https://www.samsung. com/us/business/support/mobile/phones/galaxy-s/
Care and cleaning
Avoid exposing the SafeCase to dirt, debris and acidic substances that might disrupt the ability to raise and lower the base tray. Avoid exposing the SafeCase to moisture or liquid that may impact the SafeCase performance and functionality. If the SafeCase comes in contact with any debris or liquid, immediately clean and dry the SafeCase with a lint-free cloth on exterior surfaces. Use a compressed air product to clean the lowered base tray. Do not use compressed air on the phone’s or SafeCase’s USB-C port.

APPENDIX

PRIVORO.COM

©2023 Privoro LLC or its affiliates. All rights reserved. Samsung and Galaxy are trademarks of Samsung Electronics Co., Ltd. The Privoro SafeCase device is not affiliated, associated, sponsored, endorsed by, or in any way officially connected with Samsung. PVOSUP0290V01

Appendix D: Recycling
Privoro has partnered with Call2Recycle for your device and battery recycling needs (within the United States and Canada). To find a recycling location near you, go to call2recycle.org/locator and enter your zip code.

Appendix E: Regulatory information

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Specific Absorption Rate (SAR) Certification Information
This device is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for Radio Frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government.
These FCC RF exposure limits are derived from the recommendations of two expert organizations: the National Council on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.
The RF exposure limit set by the FCC for wireless mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC SAR limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements.
For more information about SAR, visit:
· fcc.gov./general/radio-frequency-safety-0
· fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones

Canadian Regulatory Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference; and 2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1) l’appareil ne doit pas produire de brouillage; 2) l’appareil doit accepter tout brouillage radioélec-
trique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

EU Compliance Statement
Privoro hereby declares that this wireless device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU, as applicable. A copy of the EU Declaration of Conformity is available at privoro.com/legal. Legal, regulatory and compliance documentation is also available review at the same link.
European Union–Disposal Information
The Wheeled Bin symbol means that according to local laws and regulations your product and/ or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

APPENDIX

PRIVORO.COM

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals