PRIVORO PM0708 SafeCase Mobile Security Solutions Owner’s Manual
- June 10, 2024
- PRIVORO
Table of Contents
PRIVORO PM0708 SafeCase Mobile Security Solutions
Product Information
The SafeCase is a wireless device that provides safety, battery, warranty, regulatory, and compliance features. The device is safety tested to CSA/UL 62368-1:2019 and IEC 62168-1:2018 with the latest Amendments/Revisions. It is registered with the FCC and ISED and contains the Privoro Bluetooth Module model PRBTRP. The device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU. It is aradio transmitter and receiver that is designed and manufactured not to exceed the exposure limits for Radio Frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government.
Safety and Handling
Please refer to the “Safety, handling, and support” section in the SafeCase User Manual available at privoro.com/support for safety and handling instructions.
Battery Recycling
Privoro has partnered with Call2Recycle to provide device and battery recycling services. To find a recycling location near you, please visit call2recycle.org/locator and enter your zip code.
Regulatory & Compliance
To review the regulatory information specific to SafeCase, please visit privoro.com/legal.
Product Usage Instructions
- Review the Quick Start Guide before using your SafeCase.
- For any additional information or support, please visit privoro.com/support.
- Retain all documentation for future reference.
Note: Do not make any changes or modifications not expressly approved by the party responsible for compliance as it could void your authority to operate the equipment.
Instruction
SafeCase: Safety, Battery, Warranty, Regulatory and Compliance
Review the Quick Start Guide before using your SafeCase. For more information
visit privoro.com/support. Retain documentation
for future reference.
Safety and Handling See “Safety, handling and support” in the SafeCase User
Manual at privoro.com/support.
Battery
WARNING: Never dispose of batteries in a fire because they may explode. Your Privoro device contains a lithium-ion battery. Attempting to replace your device battery may damage the battery, which could lead to overheating, fire and injury. The lithium-ion battery in your device should be serviced or recycled by Privoro or an authorized service provider and must be recycled or disposed of separately from household/municipal waste. Dispose of batteries according to your local environmental laws and guidelines.
U.S. and Canada Device and Battery Recycling
Privoro has partnered with Call2Recycle for your device and battery recycling
needs. To find a recycling location near you, go to
call2recycle.org/locator and enter your zip
code.
Privoro One-Year Limited Equipment Warranty Summary
Privoro warrants that the Product will be free from defects in materials and
workmanship for the Limited Warranty Period of one year from the date of
original fulfillment to customers. During the Limited Warranty Period, Privoro
will, at its option: (1) provide replacement parts necessary to repair the
Product, or (2) repair the Product or replace it with a comparable product.
Replacement parts and replacement Products will be provided only within an
authorized Distribution Territory; will be new or serviceably used, comparable
in function and performance to the original part or Product; and will be
warranted for the remainder of the original Limited Warranty Period or, if
longer, 90 days after they are shipped to Customer. Available warranty service
options are dependent on the country in which service is requested and may be
restricted to the original country of sale. Call charges and international
shipping charges may apply. To obtain warranty service, go to
Privoro.com and click on the Contact link from the top
navigation. To view the limited warranty in its entirety, go to
privoro.com/warranty
Regulatory & Compliance
Regulatory information specific to SafeCase is available at privoro.com/legal. Device models M0007, M0008 and M0009 are registered with the FCC and ISED and contain Privoro Bluetooth Module model PRBTRP.
- M0007, M0008, M0009 – FCC ID: 2APWU-PM0708, IC ID: 23953-PM0708
- PRBTRP – FCC ID: 2APWUPRBTRP, IC ID: 23953-PRBTRP
FCC Interference Statement (Part 15.105 (b))
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15 Clause 15.21
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Part 15.19(a)
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
ISED RSS-Gen Notice
Safety
SafeCase is Safety tested to CSA/UL 62368-1:2019, IEC 62168-1:2018 with latest Amendments/Revisions.
EU Compliance Statement
Privoro hereby declares that this wireless device is in compliance with the
essential requirements and other relevant provisions of the Radio Equipment
Directive 2014/53/EU, as applicable. A copy of the EU Declaration of
Conformity is available at privoro.com/legal to
review the legal, regulatory and compliance documentation.
European Union—Disposal Information
The Wheeled Bin symbol means that according to local laws and regulations your
product and/or its battery shall be disposed of separately from household
waste. When this product reaches its end of life, take it to a collection
point designated by local authorities. The separate collection and recycling
of your product and/or its battery at the time of disposal will help conserve
natural resources and ensure that it is recycled in a manner that protects
human health and the environment.
Specific Absorption Rate (SAR) Certification Information
This device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for Radio Frequency (RF) energy
set by the Federal Communications Commission
(FCC) of the U.S. Government.
These FCC RF exposure limits are derived from the recommendations of two
expert organizations: the National Council on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and Electronics Engineers
(IEEE). In both cases, the recommendations were developed by scientific and
engineering experts drawn from industry, government and academia after
extensive reviews of the scientific literature related to the biological
effects of RF energy.
The RF exposure limit set by the FCC for wireless mobile devices employs a
unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a
measure of the rate of absorption of RF energy by the human body expressed in
units of watts per kilogram (W/kg). The FCC SAR limit incorporates a
substantial margin of safety to give additional protection to the public and
to account for any variations in measurements.
For more information about SAR, visit:
- fcc.gov./general/radio-frequency-safety-0
- fcc.gov/encyclopedia/specific-absorption-rate-sar- cellular-telephones
Before a new model device is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the SAR limit
established by the FCC. Tests for each model are performed in positions and
locations (for example, at the ear, worn on the body, or worn on the wrist) as
required by the FCC. Use of other accessories may not ensure compliance with
FCC RF exposure guidelines.
For typical operation, this device has been tested and meets FCC SAR
guidelines. The FCC has granted an Equipment Authorization for this device
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR values for body-worn operations are measured when
used with an accessory that contains no metal and that positions the device a
minimum of 1.5 cm from the body. The FCC safety limit for body-worn SAR is 1.6
watts per kilogram (1.6 W/kg). This device has FCC ID: 2APWUPM0708 and Model
Numbers: M0007, M0008, and M0009 and contains FCC ID: 2APWUPRBTRP. The product
FCC ID is also printed on the mobile device. SAR information for this and
other devices can be found on the FCC website at:
fcc.gov/oet/ea/ Follow the instructions on the
website to use the FCC ID to find SAR values for the device. SAR information
for this device can also be found on Privoro’s website at:
privoro.com/legal
Prop 65 WARNING: This product can expose you to chemicals, including Bisphenol
A, which is known to the State of California to cause birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov.
References
- call2recycle.org/locator
- Mobile Security Solutions | Privoro
- Legal | Privoro
- Product Support | Privoro
- P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>