PRIVORO SafeCase Galaxy S21 User Guide
- June 10, 2024
- PRIVORO
Table of Contents
PRIVORO SafeCase Galaxy S21 User Guide
SETUP
STEP 1
Connect SafeCase to a USB power source (computer or power adapter) using the included charging cable.
STEP 2
If applicable, remove the screen protector and/or protective case from your Galaxy.
STEP 3
Download the Privoro app from the Play Store. Open the app and follow the onscreen prompts to pair to your SafeCase.
STEP 4
Insert your Galaxy into SafeCase. Pull the latch slide to the left, unlocking the base tray.
STEP 5
Gripping the sides, slide the base tray until it’s fully extended.
STEP 6
Aligning your Galaxy’s USB-C port over SafeCase’s USB-C connector, tuck the bottom of your Galaxy into the base tray and then rest your phone onto the tray.
STEP 7
Push up from the bottom of the base tray until it clicks into place.
USE
MAINTAINING AUDIO/VIDEO PROTECTIONS
When SafeCase is powered on, audio/ video surveillance protections are automatically engaged, as indicated by the corner indicator LEDs pulsing green. To maintain these protections, simply keep your SafeCase charged.
USING YOUR PHONE OR CAMERA
To place or receive a phone/video call or capture images/video/audio,
protections must first be disengaged.
To disengage protections, swipe left (with the phone facing you) across
the touch bar, toward the unlocked icon.
When ready to reengage protections, swipe right (with the phone facing you) across the touch bar, toward the locked icon.
CHECKING SAFECASE STATUS
To check SafeCase battery level and app pairing status, open the My SafeCase screen in the Privoro app.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>