systemair 24807 EC-BASIC-H Humidity Controller Instructions
- June 4, 2024
- systemair
Table of Contents
systemair 24807 EC-BASIC-H Humidity Controller
Description
- Simple to install, connect and set up
- 50/60HZ mains option
- Can be used with all 220V single phase and 380V three phase EC fans
- Built in sensor
- Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1
- Demand control made simple
The controller compares room humidity with an adjustable set point (SW1) and regulates a 0..10 V output signal applied to a ventilator with a proportional algorithm in direct or reverse action based on jumper JP1 setting:
- JP1 closed 1-2 = reverse action
- JP1 closed 2-3 = direct action
Technical parameters
| Voltage | 85-265 | V |
|---|---|---|
| Frequency | 50/60 | Hz |
| Power consumption | max 0,46 | W |
| Temperature range | -20-50 | °C |
| Humidity measurement range | 0-100 | %RH |
Dimensions
Accessories
Documentation
- IMO_EC-BASIC_EN_SV_rev3.pdf (1,42MB)
- 24807_Declaration of Conformity_EN.pdf (127,33kB)
Wiring
Puravent, Adremit Limited, Unit 5a, Commercial Yard, Settle, North Yorkshire,
BD24 9RH
Call: 0845 6880112
Email: info@adremit.co.uk
Read User Manual Online (PDF format)
Loading......