Kanlux MORO N IG-20 In Ground Lighting Fitting Instruction Manual
- June 10, 2024
- Kanlux
Table of Contents
Kanlux MORO N IG-20 In Ground Lighting Fitting
Product Information
- Model: MORO N IG-20
- Dimensions: A3-297x420mm/ISO216
- Brand: Kanlux
- Input Voltage: 220-240V~
- Frequency: 50Hz
- Maximum Power: 20W
- Bulb Type: PAR16 GU10
- Ingress Protection Rating: IP67
- Weight: 2000kg
- Impact Protection Rating: IK08
- Load Capacity: 20[kN]
- Languages Available: EN, DE, FR, NL, IT, PL, CZ, SK, HU, RO/MD, SI, BG, RU/BY, UA, LT, LV, EE
Product Usage Instructions:
- Ensure the product is placed on a cement surface and the weight of the product is evenly distributed.
- Connect the product to a power source with an input voltage of 220-240V~ and frequency of 50Hz.
- Insert a PAR16 GU10 bulb with a maximum power of 20W into the product.
- Ensure that the bulb is not more than 60mm in size.
- Use P12 to adjust the direction of the light beam.
- Use P13 to adjust the angle of the light beam.
- Use P14 to adjust the focus of the light beam.
- Use P15 to adjust the distance of the light beam.
- Use P16 to adjust the size of the light beam.
- Use P17 to turn the product on or off.
- Refer to the user manual for further instructions and safety information.
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution. Mounting diagram:
see pictures. Check for proper mechanical fastening and connection to
electrical power prior to first use. Product has a protective contact/terminal.
Failure to connect the protective lead may lead to electric shock. The product
can be connected to a supply network which meets energy quality standards as
prescribed by law. The luminaire can only be installed in areas where touch /
pressure is not possible (in accordance with installation regulations) or in
areas where the possibility of touch / pressure is limited and only in areas
where there is no pedestrian / bike traffic (e.g. areas adjacent to walls or
buildings). To maintain the proper IP protection level, the right diameter of
the power cable should be selected for the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
Product can be used either indoors or outdoors. Product has stronger
resistance to mechanical hazards.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be done when the product is disconnected from power
supply. Do not use chemical detergents. Do not cover the product. Ensure free
air access. Product must not be used in unfavourable conditions, e.g. dust,
water, moisture, vibrations, explosive air atmosphere, fumes, or chemical
fumes, etc. Replacement of light source to be performed after the product
cools down: see pictures. Light sources with parameters provided in the manual
must be used in the product. It’s forbidden to use the product with damaged
protective cover. The glass of the luminaire heats up to a high temperature.
Maximum luminaire-protection glass temperature Tmax=130°C (Halogen 20W). The
product heats up to a high temperature.
EXPLANATIONS OF SYMBOLS USED
- P1: Rated voltage, frequency.
- P2: Maximum power of the light source.
- P3: Light bulb/LED lamp.
- P4: Base/holder.
- P5: Product meets the requirements of EU directives.
- P6: Class I. A product in which protection against electric shock is provided not only by means of basic insulation but also through additional safety measures, i.e. extra protective circuit to which protective conductor of the fixed
- feeding installation needs to be connected.
- P7: Dust-proof product. Protection against shallow immersion provided.
- P8: Immediately stop using the product if the outer bulb is cracked or broken.
- P9: The chipped globe, screen or protective shield must be replaced immediately.
- P10: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
- P11: Product can be used either indoors or outdoors.
- P12: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
- P13: Protection against mechanical impact with energy = 5J.
- P14: Environmental operating temperature range that the product can be exposed to.
- P15: The resistance of a product to static load.
- P16: The product meets the requirements of technical regulations applicable in Ukraine.
- P17: The product is compliant with all relevant United Kingdom regulations.
ENVIRONMENTAL PROTECTION
Keep your environment clean.
- P18: Segregation of post-packaging waste is recommended.
This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical
shock, physical injury and other material and non-material damage. For more
information about Kanlux products visit
www.kanlux.com. Kanlux SA shall not be responsible
for any damage resulting from the failure to follow these instructions. Kanlux
SA reserves the right to make changes in the manual – the current version can
be downloaded at www.kanlux.com.
MORO N IG-20
Caution! Do not touch! Can cause burning! The glass of the luminaire heats up to a high temperature. Maximum luminaire-protection glass temperature Tmax=130°C (Halogen 20W). The product heats up to a high temperature
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>