Kanlux Caliza CCT W LED Wall Fixture Instruction Manual
- May 15, 2024
- Kanlux
Table of Contents
Kanlux Caliza CCT W LED Wall Fixture
Product Specifications
- Model: CALIZA LED CCT
- Product Code: 2023/09-1
- Size: A 3 – 297x420mm (ISO216)
- Battery: ACCUMULATOR Li-Ion 3.7V 800mAh 402284 type
- Power: Max 2W
- Color Temperature: 3000K/4000K/6500K
- Luminous Flux: Max 160 lm
- Color Rendering Index (CRI): Ellipse Tc 6xMacAdam
- IP Rating: IP20
- USB Output: 5V, 1A
- USB Port Type : USB-C
- Operating Time: Up to 25000 hours
- Minimum Operating Distance: 0.1m
INTENDED USE / APPLICATION
Product for spotlighting and ornamental lighting. Touch switch with dimming possibility.
MOUNTING
Read the manual before mounting. Technical changes reserved. Mounting diagram:
see pictures. Any activities to be done with disconnected power supply.
Exercise particular caution. The product requires preparation before
operating. “ON” means “switch/switched on”, and “OFF” means “switch/switched
off”.
FUNCTIONAL CHARACTERISTICS
Product for indoor use. Turning the light on/off is done through a quick touch.
Dimming/brightening is done through a longer touch. A device with a non-
removable battery.
USAGE GUIDELINES / MAINTENANCE
Clean only with soft and dry clothes. Do not use chemical detergents. Do not cover the product. Ensure free air access. The product must not be used in unfavorable environments, e.g. dust, moisture, water, vibrations, etc. Product with a non-replaceable light source of the LED type. The product cannot be fixed if the light source becomes damaged. It’s forbidden to use the product with a damaged protective cover. ATTENTION! Do not look directly at the LED light beam. Non-demountable product. Not suitable for independent repairs. The construction of the product offers no resistance to specific conditions, e.g. due to the presence of defrosting substances and salt atmosphere; oils, lubricants, and solvents. Prevent flooding of the device. In case of failure, the device should be replaced with a new one.
HOW TO USE
EXPLANATIONS OF SYMBOLS USED
- P1: Supply voltage.
- P2: Maximum power of the light source.
- P3: Colour temperature.
- P4: Rated luminous flux.
- P5: Protection against solid foreign objects bigger than 12mm provided.
- P6: Use only indoors.
- P7: Rated durability.
- P8: Class III A product in which protection against electric shock is provided by feeding it with very low safe voltage (SELV) with no risk of creating higher than safe voltage.
- P9: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
- P10: Immediately stop using the product if the outer bulb is cracked or broken.
- P11: Product meets the requirements of EU directives.
- P12: The product is compliant with all relevant United Kingdom regulations.
- P13: Certificate of Conformity confirming the quality of production by approved standards on the territory of the Customs Union.
- P14: The product meets the requirements of technical regulations applicable in Ukraine.
ENVIRONMENTAL PROTECTION
Segregation of post-packaging waste is recommended.
P15: This labeling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labeled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health, and require a
special form of recycling/neutralizing. Keep your environment clean. The
labeling indicates the requirement to selectively collect waste electronic and
electrical equipment, as well as all kinds of batteries. Products labeled in
this way must not be disposed of in the same way as other waste under the
threat of a fine. Products labeled in this way should be returned to a
collection facility for waste electrical and electronic goods. Used batteries
and/or accumulators need to be treated as separate waste and placed in an
individual container. Used batteries and/or accumulators should be returned to
a collection facility for waste batteries/accumulators. Information on
collection centers is provided by local authorities or sellers of such goods.
The above rules regard the EU area. In the case of other countries,
regulations in force in a given country must be applied. Contacting the
distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury, and other material and non-material damage.
For more information about Kanlux products visit
www.kanlux.com. Kanlux S.A. shall not be responsible
for any damage resulting from the failure to follow these instructions. Kanlux
SA reserves the right to make changes in the manual – the current version can
be downloaded at www.kanlux.com.
The accumulators are covered by a one-year warranty.
Rechargeable batteries are only to be charged under adult supervision. Batteries contain substances that may be harmful to the environment and human health. Keep out of reach of children and seek immediate medical help if swallowed, chemical burns may arise from ingestion. Never throw batteries in a fire or attempt to open the outer casing.
FAQ
Frequently Asked Questions
- Q: How do I know when the battery is fully charged?
- A: The battery indicator will show a solid light when the battery is fully charged.
- Q: Can I use the product while it is charging?
- A: It is recommended to avoid using the product while it is charging to prevent any safety hazards.