Kanlux 33125 DROXY IP65 Decorative and Modern Round Recessed Mounting Lamp Instruction Manual
- June 4, 2024
- Kanlux
Table of Contents
33125 DROXY IP65 Decorative and Modern Round Recessed Mounting Lamp
Instruction Manual
2022/03-1
A3+ / 329x483mm
www.kanlux.com
PROXY IP65
INTENDED USE / APPLICATION
Decorative ring – component of the lighting fixture. Product designed to be
used in the home and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Mounting diagram: see pictures. Check for
proper mechanical fastening and connection to electrical power prior to first
use. Terminals need to be placed in a way that will disable their contact with
the product parts that become heated. A single component is not a complete
lighting fixture. Use only the listed types of frames, as per the drawing. The
components used must be compliant with the applicable technical requirements
in terms of safety. The type of components used must be selected to match the
mains voltage and the expected operating conditions.
FUNCTIONAL CHARACTERISTICS
The product can be used either indoors or outdoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be done when the product is disconnected from the
power supply. Clean only with soft and dry cloths. Do not use chemical
detergents. Ensure free air access. The product can only be supplied by rated
voltage or voltage within the range provided. Light sources with parameters
provided in the manual must be used in the product. The light source becomes
heated to a high temperature. The product may heat up to a higher temperature.
Do not cover the product. Place all the leads and elements mating with the
fixture ensuring no contact with the parts of the lighting system that become
heated. Adjustment of lighting direction and/or replacement of the light
source must be done when the product has cooled down. Replacement of light
source to be performed after the product cools down: see pictures. The product
must not be used in unfavorable environment, e.g. dust, moisture, water,
vibrations, etc. The inspection of all connections and elements of the
lighting system is recommended.
EXPLANATIONS OF SYMBOLS USED
P1: Rated voltage.
P2: Maximum power of the light source.
P3: LED lamp.
P4: Base/holder.
P5: Product meets the requirements of EU directives.
P6: The product is not suitable for covering with heat-insulating
material.
P7: Class III A product in which protection against electric shock is
provided by feeding it with very low safe voltage (SELV) with no risk of
creating higher than safe voltage.
P8: The product can be used either indoors or outdoors.
P9: Dust-proof product. Protection against water jets provided.
P10: Protection against solid foreign objects bigger than 12mm provided.
P11: Class II. A product in which protection against electric shock is
provided not only through basic insulation, but also double or reinforced
insulation.
P12: The symbol describes the minimal distance of a light fixture (its
light source) from the spots and objects that it’s illuminating.
P13 : The chipped globe, screen, or protective shield must be replaced
immediately. Immediately stop using the product if the outer bulb is cracked
or broken.
The product can only be used in a lighting fixture with protective glass.
P14: Environmental operating temperature range that the product can be
exposed to.
P15: The product is compliant with all relevant United Kingdom
regulations.
P16: The product meets the requirements of technical regulations
applicable in Ukraine.
**ENVIRONMENTAL PROTECTION
**
Keep your environment clean. Segregation of post-packaging waste is
recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury, and other material and non-material damage.
For more information about Kanlux products visit
www.kanlux.com. Kanlux S.A. shall not be responsible
for any damage resulting from the failure to follow these instructions. Kanlux
SA reserves the right to make changes in the manual – the current version can
be downloaded at www.kanlux.com. 
12V, HLDR-GX5.3 SC-1 [25590]
Using a light source with a power of less than 10W, we recommend using SC
shields (available from Kanlux) – index: 25590.
