Kanlux ASTIM Linear LED Furniture Light Instruction Manual
- June 9, 2024
- Kanlux
Table of Contents
Kanlux ASTIM Linear LED Furniture Light
WHAT IN THE BOX
INSTALLATION INSTRUCTIONS
WARNINGS
INTENDED USE / APPLICATION
Product designed for use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
- Product for indoor use.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature.
ATTENTION: Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range provided. Product must not be used in unfavourable environment, e.g. dust, moisture,water, vibrations, etc.
EXPLANATIONS OF SYMBOLS USED
- P1: Rated voltage, frequency.
- P2: Rated power.
- P3: Rated luminous flux.
- P4: The specified luminous flux refers to the light source (LED module) used.
- P5: Rated durability.
- P6: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
- P7: Colour temperature.
- P8: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.
- P9: Protection against solid foreign objects bigger than 1,0mm provided. Protection against splashing water provided.
- P10: Use only indoors.
- P11: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
- P12: The product is not compatible with lighting dimmers.
- P13: Product meets the requirements of EU directives.
- P14: The chipped globe, screen or protective shield must be replaced immediately.
- P15: Environmental operating temperature range that the product can be exposed to.
- P16: Caution, risk of electric shock.
- P17: The product is compliant with all relevant United Kingdom regulations.
- P18: The product meets the requirements of technical regulations applicable in Ukraine.
- P19: This product is equipped with a light source with energy efficiency class E.
- P20: It is not possible to replace the LED light source.
- P21: It is not possible to replace the control panel or control equipment.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended.
P22: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about KANLUX products visit www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.
Distributor
- Kanlux s.r.o., Sadová 618, 738 01 Frýdek-Místek
- ph. +359 2 42 19 623
- www.kanlux.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>