Kanlux STIVI LED 24W-NW-O-SE Ceiling Mounted LED Light Instruction Manual

Kanlux STIVI LED 24W-NW-O-SE Ceiling Mounted LED Light

STIVI LED SE Product Information

The STIVI LED SE is a lighting product designed for household and general applications. It can be used both indoors and outdoors and has a detection area of up to 7m with a 360O LED light source.
The product is available in two variants, the 24W and the 36W, with a correlated color temperature of 4000K.

• Model: STIVI LED SE
• Voltage: 220-240V~
• Frequency: 50Hz
• Luminous Flux: 3120lm for 24W and 4680lm for 36W
• LED Light Source: ellipse Tc 6x MacAdam
• Color Temperature: 4000K
• Rated Life: 50,000 hours
• Color Rendering Index (CRI): 80
• Ingress Protection (IP) Rating: IP65 (water-resistant and dust-tight)
• Impact Resistance (IK) Rating: IK08 (protection against mechanical impacts)

STIVI LED SE Product Usage Instructions

Before installing and using the product, please read the user manual carefully. The following instructions should be followed:

1. The product should only be installed by a qualified person.
2. The product should be mounted in a suitable location with adequate support.
3. The product should be connected to a suitable electrical installation that complies with quality standards and regulations.
4. The cable diameter should be adjusted to the size of the cable gland to ensure the correct IP rating.
5. After installation, ensure that the product is connected to the electrical installation correctly before use.
6. The product can be used indoors or outdoors and will automatically turn on when moving objects are detected within the detection area.
7. The operation time can be adjusted using the hold time function with options for 5 seconds, 90 seconds, 5 minutes, and 15 minutes.
8. The product should be maintained regularly to ensure proper operation. Any micro-gaps or micro-pauses between transmitter contacts should be checked and repaired if necessary.

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS

Product can be used either indoors or outdoors. Product automatically lights up when moving objects are detected. Product offers the possibility of adjusting the operation time. USAGE

GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product with non-replaceable light source of the LED type. Product cannot be fixed if the light source becomes damaged.

ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Replacing the light source in the housing is impossible. If the light source is damaged replace the entire housing. It is not possible to disassemble the light source and control panel without permanently damaging the product and losing the declared tightness degree of the equipped product (lighting fixture). Moving object (e.g. vehicles) may cause random activation of the sensor. In the area of strong electromagnetic interference the functioning of the product may be disrupted.

EXPLANATIONS OF SYMBOLS USED

• P1: Rated voltage, frequency.
• P2: Rated power.
• P3: Rated luminous flux.
• P4: The specified luminous flux refers to the light source (LED module) used.
• P5: Colour temperature.
• P6: Rated durability.
• P7: Colour Rendering Index.
• P8: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
• P9: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.
• P10: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
• P11: Viewing angle.
• P12: Protection against mechanical impact with energy = 5J.
• P13: Dust-proof product. Protection against water jets provided.
• P14: Product can be used either indoors or outdoors.
• P15: The product is not compatible with lighting dimmers.
• P16: The product can only be used in a lighting fixture with protective glass. The chipped globe, screen or protective shield must be replaced immediately.
• P17: Product meets the requirements of EU directives.
• P18: Environmental operating temperature range that the product can be exposed to.
• P19: Caution, risk of electric shock.
• P20: This product is equipped with a light source with energy efficiency class C.
• P21: The product is compliant with all relevant United Kingdom regulations.
• P22: It is not possible to replace the LED light source.
• P23: It is not possible to replace the control panel or control equipment.
• P24: The product meets the requirements of technical regulations applicable in Ukraine.
• P25: Micro-gap between transmitter contacts.

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended.

• P26: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Kanlux products visit www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com. CE declaration of compliance: We, Kanlux SA, hereby declare the product is compliant with the basic requirements and other respective provisions of Directive 2014/53/EU. The declaration of compliance is available in electronic form on the company’s website: www.kanlux.com.

Through-wiring of the fixtures possible

www.kanlux.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>