Sage MT01 Wireless Handsfree Car Kit with FM Transmitter User Guide

June 9, 2024
Sage

Sage-LOGO

Sage MT01 Wireless Handsfree Car Kit with FM Transmitter

Sage-MT01-Wireless-Handsfree-Car-Kit-with-FM-Transmitter-
PRODUCT

Product Information

The MT01 Wireless Handsfree Car Kit comes with an FM transmitter and PD 30W fast charging. It allows you to transmit music and calls directly from your wireless device to your car FM audio system. The built-in wireless V5.3 provides a hands-free call function and music transmission. The device has two fast charging ports (5V 2.4A USB+PD 30W) that save time charging your phone. It supports MP3, WMA, WAV, APE, and FLAC music formats. The package includes the Car Wireless FM Transmitter and a User Manual.

Friendly Tips:
After receiving the product, do not hurry to insert the product into the cigarette lighter hole of the car. After starting your car, firstly an idle FM channel with no local radio station program is patiently on the car radio, and the standard is a slight rustling sound. Then insert the product into the cigarette hole, and adjust the same FM frequency of the product to the FM frequency of the car. At this time, the car radio will be very quiet and there is no static interference. (If it’s still not quiet, try to find new ones again, free channel), and finally, connect your phone to the product via wireless. When they are paired successfully, you can enjoy the song from your phone.

This Wireless car FM transmitter allows you to transmit music and calls directly from your Wireless device to your car FM audio system. The built-in Wireless V5.3 provides a hands-free call function and music transmission. It also has two fast charging ports (5V 2.4A USB+PD 30W), which will greatly save time charging your phone. Please read the user manual carefully before use. Hope this device will make your driving more fun and safer

Product Usage Instructions

  1. After receiving the product, do not insert it into the cigarette lighter hole of the car immediately.
  2. Start your car and tune the car radio to an idle FM channel with no local radio station program, which will make a slight rustling sound.
  3. Insert the product into the cigarette hole and adjust the same FM frequency of the product to the FM frequency of the car.
  4. If there is static interference in the car radio, try finding a new free channel again.
  5. Connect your phone to the product via wireless when they are paired successfully.
  6. Enjoy the song from your phone.

Package contents

  • Car Wireless FM Transmitter
  • User Manual

Specifications

  • Model MT01
  • Wireless Version V5.3
  • Wireless Connection Distance 10m (Max.)
  • Frequency range 2402-2480MHz
  • FM transmission distance about 3M
  • Input DC12-24V
  • Type-c Output PD30W(5V 3A,9V 3A,12V 2.5A)
  • “♫ ” U disk port output 5V 2.4A
  • USB: (Max capacity) 64G
  • Music format MP3, WMA,WAV, APE,FLAC

Product Overview

Sage-MT01-Wireless-Handsfree-Car-Kit-with-FM-
Transmitter-FIG- \(1\)

  1. FM Channel Display
  2. FM frequency+
  3. FM frequency-
  4. Short press: Previous song long press: Turn lights on/off
  5. Short press: Next song long press: U disk and Bluetooth song switching
  6. Multi-function button:
  7. Short press: answer/hang up, play/pause)
  8. long press: Power on/off
  9. Press twice: Activate siri&google
  10. Rotate Left: volume -(In frequency modulation mode, FM frequency-)
  11. Rotate right:volume +(In frequency modulation mode, FM frequency+)
  12. Color lighting
  13. BASS EQ Scroll up: BASS EQ Enhancement Scroll Down: BASS EQ weakening
  14. Treble EQ Scroll up: Treble EQ Enhancement Scroll Down: Treble EQ weakening
  15. Mic
  16. flash drive socket
  17. 5V/2.4A Charger
  18. PD 30W Fast charging

How to Use FM Transmitter Radio

Sage-MT01-Wireless-Handsfree-Car-Kit-
with-FM-Transmitter-FIG- \(2\)

  1. Tune your car radio to a clean, empty channel with no programming.
  2. Plug the FM transmitter into the cigarette lighter or power port. It will be automatically powered on with the LED displaying the vehicle’s battery voltage, FM frequency, then showing the word “bt”.Sage-MT01-Wireless-Handsfree-Car-Kit-with-FM-Transmitter-FIG- \(3\)
  3. Click or hold the CH- or CH+ key to adjust the frequency up and down to adjust the frequency of the unit to the same as the car radio.Sage-MT01-Wireless-Handsfree-Car-Kit-with-FM-Transmitter-FIG- \(4\)

Wireless Pairing

  1. When the LED display shows “bt,” the device enters into wireless pairing mode.
  2. Enable wireless on the device you want to pair.
  3. Search and select ID MT01 from the list, then connect.
  4. If asked, enter the pairing code ‘0000’ or ‘1234’.Sage-MT01-Wireless-Handsfree-Car-Kit-with-FM-Transmitter-FIG- \(5\)

Wireless CallingSage-MT01-Wireless-Handsfree-Car-Kit-with-FM-Transmitter-
FIG- \(6\)

Playing and Controlling the Music

Sage-MT01-Wireless-Handsfree-Car-Kit-
with-FM-Transmitter-FIG- \(7\)

Note : Bass and treble EQ adjustment effect is very strong, it is recommended to work together to adjust to the best state, adjusted to the highest alone, easy to affect the sense of listening

Playing and Controlling the Music

  • Support format: FAT32 format USB flash drive that has not been used as a computer boot disk
  • Supported capacity: up to 64G

Special function reminder

  1. Long press:
    Turn off the atmosphere light(Driving at night, the lights are too bright, please use him)

  2. Long press:
    Switch music source (bluetooth/USB drive)

  3. Long press:
    Turn on/off the power, turn offBluetooth/transmission/display, and only keep the charging function(No depletion of car battery power)

Note:

  • In the music-playing mode, when there is an incoming call, it will automatically switch to telephone mode and play the phone number in English.
  • If the volume was set below 22 at the last use, the next time you use the transmitter it will default to 24. If it was between 23 and 30 the last time it was used, it will be kept at the same level the next time it is turned on.

USB charger

  • USB socket with music logo supports up to 64GB FAT format U disk for music playback and supports 5V 2.4A current output for charging.
  • The Type-C port is an independent PD3.0 interface, that supports 5V 3A, 9V 3A, and 12V 2.5A fast charging protocol, and the maximum output power is PD30W, which can meet the fast charging of most new mobile devices.

Music playback source selection

  1. When connected to the Wireless, open the phone music player and click play to play wireless music.
  2. This machine defaults to inserting audio source priority play if you need to play U disk music, please insert the U disk into the “♫ ” port of this machine, and the screen shows the word USB will automatically play the music in the U disk

Tips. U disk music does not support playing music in folders, please do not store the songs in folders by category.

Cautions:

  1. When the car’s battery voltage is less than 12V, the LED display will flash to remind you to charge the car battery.
  2. The transmitter will connect to the pre-set phone automatically when turning it on. (Keep Wireless function activated).
  3. Hang up via the phone if answering with the handset.
  4. Please do not use the transmitter in severe high temperatures, humidity, or dusty or corrosive environments.
  5. Please remove the product from the cigarette lighter when not in use for a long time.
  6. Never disassemble the product without due permission, otherwise, the warranty will be invalid.

Warm Tips

Lifetime Support and 24-hour customer service email: support@carrie4service.com
Contact us by Amazon for a Replacement or Refund if you receive the item with the defect. We apologize for any inconvenience caused and we will provide you with 100% assistance.

FCC

Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by SAGE HUMAN ELECTRONICS INTERNATIONAL CO., LTD may void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF exposure statement:

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The device is installed and operated without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals