Kanlux ULOV LED DIM LED Plug-in LED Lamp Instruction Manual
- May 15, 2024
- Kanlux
Table of Contents
Kanlux ULOV LED DIM LED Plug-in LED Lamp Instruction Manual
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. The product can be connected to a supply network which meets energy quality standards as prescribed by law.
Product has a protective contact/terminal
FUNCTIONAL CHARACTERISTICS
Product for indoor use. Product equipped with a dusk sensor. Fixtures turns on automatically after dark. Possibility of dimming only by means of an internal electronic system
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be done when the product is disconnected from power supply. Clean only with soft and dry cloths. Do not cover the product. Non- demountable product. Not suitable for independent repairs. It’s forbidden to use the product with damaged protective cover.
Replacing the light source in the housing is impossible. If the light source is damaged replace the entire housing.
EXPLANATIONS OF SYMBOLS USED
P1: Rated voltage, frequency.
P2 : Rated power.
P3: Rated luminous flux.
P4: Colour Rendering Index.
P5: Colour temperature.
P6: Product meets the requirements of EU directives.
P7: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.
P8: Protection against solid foreign objects bigger than 12 mm provided.
P9: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
P10: Use only indoors.
P11: The chipped globe, screen or protective shield must be replaced immediately. Immediately stop using the product if the outer bulb is cracked or broken.
P12: The product is compliant with all relevant United Kingdom regulations.
P13: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
P14: The product meets the requirements of technical regulations applicable in Ukraine.
P15: The product is not compatible with lighting dimmers.
ENVIRONMENTAL PROTECTION
P16: Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage.
For more information about Kanlux products visit www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.
INSTRUCTION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>