Xinvo Industrial XV-BC8 Wireless Monster Speaker User Manual
- June 6, 2024
- Xinvo Industrial
Table of Contents
Wireless Monster Speaker
User Manual
- Speaker
- LED indicator
- Microphone
- ON/OFF button
- Strap Hole
- Micro USB socket
Charging the Battery:
-
Insert the charging cable into the Micro USB input port.
Connect the USB plug into the DC 5V USB port. The Charging LED indicator will turn on. -
After Charging is complete, the LED indicator will turn off.
Noted: when music sound volume decreases and you hear a warning tone,
please charge the speaker.
Bluetooth pairing for music/phone call/camera remote shutter:
-
Turn on the speaker by pressing the “O” button for 3 seconds.
-
Turn on your Bluetooth device and activate the Bluetooth function.
-
Search for Bluetooth pairing name: Amor-AHA (Green) /Lee-AHA (Blue) and click to pair. The speaker will pair automatically and the blue indicator light will turn on.
Press the “O” button to answer the call when a call is coming in or take a photo when the camera is open on your device. -
Turn off the speaker by pressing the “O” button for 4 seconds.
Note:
- If you can’t take a photo, if using an Android, please open “Settings” – “Camera” then set “Volume Key” to “Shutter”, if using IOS, you just need to refresh the Bluetooth connection.
- If you can’t play music, please reconnect the Bluetooth connection.
- Self-Timer function is not compliant with all mobile phones.
Pairing 2 speakers
- Make sure no speakers are connected to your device.
- Power on 2 speakers (at the same time).
- Double Click the “O” button on the 2nd speaker. You should hear a chirping sound, then the other speaker should make a short connect sound. (If you do not hear a connect sound, double click the opposite speaker “O” button.
- In your device Bluetooth menu, locate & Select the pairing name: Amor-AHA (Green) / Lee-AHA (Blue) and click to pair. You will now be connected to both speakers
Specification:
Frequency Response | 20HZ-20KHZ |
---|---|
THD | ≤ 1% |
S/N | ≥ 80 DB |
Bluetooth Version | Bluetooth V5.0 |
Product Size | 41.5*45mm |
Product Weight | 40g |
Safety Information
a. Battery Shall not be exposed to excessive heat such as sunshine, fire, or
the like.
b. CAUTION: Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type.
c. No open flame sources, such as lighted candles, should be placed near the
speaker.
d. Attention should be drawn to the environmental aspects of battery disposal.
e. The use of the speaker in moderate climates.
f. Do not use the speaker on airplanes
g. Do not attempt to modify or disassemble the speaker.
Thank you for your purchase.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.