amazon basics B094YHJJVG Smart Outdoor Plug Instruction Manual

amazon basics B094YHJJVG Smart Outdoor Plug

Important Safeguards

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included

WARNING

• SUITABLE FOR OUTDOOR AND DAMP LOCATIONS. DO NOT IMMERSE IN WATER. WHEN USING OUTDOOR INSTALL ABOVE GROUND LEVEL AT MIN 4.7 ft (1.4 m) WITH RECEPTACLE POINTED DOWN WHEN OUTDOOR.
• KEEP THE PLUG AND OUTLETS DRY. Connect only to a receptacle or a cord rated for outdoor use. Onlv receptacles or cords rated for outdoor use can ensure water-proof connection (IP65 rating).

WARNING Risk of fire and product damage!

• This plug should only be used with devices which produce resistive loads (e.g. luminaries, heaters etc.).
• Never connect devices which produce inductive loads (e.g. fans, refrigerators, dishwashers, washing machines etc.).

CAUTION Risk of electric shock!
Do not attempt to disassemble, repair, or modify the product. If a direct short is created on the output, the product will be damaged and will no longer function.

• The supply cord of this product cannot be replaced. If the cord is damaged, the product should be discarded.
• To reduce the risk of electric shock, do not use this product in General Patient Care Areas or Critical Patient Care Areas. This product has not been evaluated for use where Article 517 of the National Electrical Code requires Hospital Grade components.
• Always close the silicone cover when the given outlet is not in use.
• This product is voltage-free only when unplugged.
• Connect the product directly to an easily accessible grounded receptacle only.
• Do not use the product with power strips or extension cords.
• Keep away from heat sources.
• Keep away from children.
• Do not position the product in water or in places where water can collect.
• Do not connect any devices that exceed the power rating of this product (total of 1800 W). Take special care when connecting devices consuming larger amounts of power, such as power tools or fan heaters.
• Do not connect the product in series.
• Do not use the product to control medical or life support equipment.
• Unplug the product when not in use.

Intended Use

• This product is intended for switching on or off the connected luminaries and electrical appliances through a Wi-Fi connection with Amazon Alexa app or other external Alexa built-in devices.
• This product is intended for household use only.
• This product is suitable for use outdoors and in damp locations.

Before First Use

DANGER Risk of suffocation!
Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.

• Remove all the packing materials.
• Remove and review all components before use.
• Check the product for transport damages.
• Before connecting the product to the power supply, check that the power supply voltage and current rating corresponds with the power supply details shown on the product rating label.

Frequently Asked Questions

NOTICE For more FAQ and more information, go to www.amazon.com/B094YHJJVG.

• Problem 1 How to do a factory reset?
  Solution 1 Press and hold the power button (B) with “outlet 2” marking for 10 seconds. Release the button once you see the outlet 2 indicator blinking green and red alternatively. When outlet 2 indicator blinks green, reset is complete. Then set up the device again.

• Problem 2 Amazon Alexa app cannot find or connect to the device.
  Solution 2

  • Check that your phone/tablet and the Alexa app have the latest software version.
  • Make sure that your phone/tablet and your device are connected to the same 2.4 GHz network. The device is not compatible with 5 GHz Wi-Fi networks or 4G/5G Mobile networks.
  • Check that your phone/tablet is within 30′ (10 m) of your device.
  • Restart your device. To restart, unplug the device from the receptacle and plug it back in. If you have restarted your device and it still is not working, follow solution 1 to do a factory reset.

• Problem 3 Error code (-1:-1:-1:-1) displays on the screen.
  Solution 3 Make sure your phone/tablet has Bluetooth® turned on throughout the entire setup process and the device vou are trying to setup is in pairing mode. Then set up again.

• Problem 4 Lost connection or Wi-Fi connection is not stable.
  Solution 4 Make sure the device is placed within Wi-Fi range. Move the device closer to the Wi-Fi router or use a Wi-Fi range extender.

Wall mounting

Tools needed

Mounting

• CAUTION When using outdoors, connect only to a receptacle or cord rated for outdoor use.
• NOTICE The product must be mounted on a vertical position with the outlets (E) and (F) facing downward. Mount the product as instructed in this chapter.
• NOTICE Use the suitable mounting hardware for the wall type. Consult your local hardware store when in doubt.
• NOTICE The hole size and depth depend on the fastener used. The fastener and mounting surface must be able to withstand the combined weight of the product and of the connected cords with plugs

1. Connect the product to a receptacle. Mark the position of the hole on the mounting bracket (G) (Fig. 1).
2. Drill a hole. Insert wall plug for concrete wall (Fig. 2).
3. Insert the screw into the hole, leaving it protruding from the wall (Fig. 3)
4. Hang the product on the screw. Connect the plug to the receptacle (Fig. 4). Tighten the screw for a secure fit, if needed.

Specifications

• Model number HPPA52CWBAMZ
• Rated voltage 120 V AC, 60 Hz
• Rated current max.15 A (resistive load)
• Maximum load 1800 W
• Operating temperature -22 °F to 122 °F (-30 •c to so °C)
• Operating humidity 0 % to 85% RH, non-condensing
• Wi-Fi frequency 2.4 GHz*
• Wi-Fi protocol IEEE 802.11 b/g/n
• Wi-Fi range approx. 150 ft (SO m) (free area)
• Ingress protection IP65
• Net weight approx. 0.64 lbs (292.5 g)
• Dimensions (W x H x D) approx. 5.04 x 3.71 x 1.81″ (12.8 x 9.43 x 4.6 cm)

The product is not compatible with 5 GHz Wi-Fi networks or 4G/5G Mobile networks. IP65 can only be maintained when the silicone cover blocks the outlets and the product is mounted on a downward vertical position.

Cleaning and Maintenance

WARNING Risk of electric shock!

• To prevent electric shock, unplug the product before cleaning.
• During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.

Cleaning

• To clean the product, wipe with a soft, slightly damp cloth.
• Wipe the product dry after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Storage
Store the product in its original packaging in a dry area. Keep away from children and pets.

FCC – Supplier’s Declaration of Conformity

• Unique Identifier  B094YHJJVG – Smart Outdoor Plug, works with Alexa
• Responsible Party Amazon.com Services LLC.
• U.S. Contact Information 410 Terry Ave N. Seattle, WA 98109 USA
• Telephone Number 206-266-1000

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

RF Warning Statement : The device has been evaluated to meet general RF exposure requirements. This device should be installed and operated with minimum distance of 8″ (20 cm) between the radiator and your body.

Feedback and Help

We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review. If you need help with your Amazon Basics product, please use the website or number below.

• amazon.com/gp/help/customer/contact-us
• +1 877-485-0385
• amazon.com/AmazonBasics

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>