BenQ XL2566K LCD Monitor Instruction Manual
- June 10, 2024
- BenQ
Table of Contents
BenQ XL2566K LCD Monitor
Product Information
The LCD Monitor Model No. XL2566K may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the printed circuit boards assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
Product Usage Instructions
If you need to dispose of your LCD Monitor Model No. XL2566K, please follow the disassembly instructions below:
Disassembly Tools
- Philips Screwdriver for M3 Screw
- Nosed Pliers
- Diagonal Cutting Pliers
- Slotted screwdriver
- Six Point Sockets
- Philips Screwdriver for M2.5 Screw
- Knife
Disassembly Process
- Disconnect the power cable from the monitor.
- Remove the monitor stand by unscrewing the screws with a Philips screwdriver for M3 screws.
- Remove the back cover by using a knife to pry it open.
- Unscrew the screws holding the metal shield in place using a Philips screwdriver for M2.5 screws.
- Remove the metal shield.
- Unscrew the screws holding the circuit board in place using a Philips screwdriver for M3 screws.
- Remove the circuit board carefully with nosed pliers.
- Use diagonal cutting pliers to cut the wires connecting the circuit board to the monitor.
- Dispose of the circuit board and other components separately according to local regulations.
Disassembly Time
The total time required for disassembling the LCD Monitor Model No. XL2566K is 30 minutes.
Recycle Disassemble Instruction
(Dismantled Information)
Requirements according to ANNEX VII of DIRECTIVE 2012/19/EU on waste electrical and electronic equipment (WEEE)
Materials and components with hazardous content
LCDs may contain hazardous substances like Pb and BFRs which are covered by
exemptions under the RoHS directive. However, the majority is present in the
printed circuit boards assembly. In order to reduce emissions as much as
possible, a complete disposal of the old appliance is required. This treatment
may only be performed in authorized handling plants.
- Product Name: LCD Monitor
- Model No.: XL2566K
Disassembly Tools
Disassembly process
Disassembly Time
Total time: 30 minutes
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>