smartwares CIP-37553 Indoor IP-Camera Instruction Manual
- June 10, 2024
- smartwares
Table of Contents
CIP-37553 | INDOOR IPCAMERA
Instruction manual
PARTS DESCRIPTION
Wireless technology: Wi-Fi
Operating frequency: 2,4 GHz
Max. radio-frequency power: 9.99 dBm
Only use the supplied power adapter
BOX CONTENT
- Camera
- USB cable
- USB power adapter
- Instruction manual
PARTS DESCRIPTION
- Camera lens
- Day-night sensor
- Microphone
- SD card slot
- Reset button
- USB cable input
- USB power cable
- USB power adaptor
BEFORE THE FIRST USE
Follow the instructions below to quickly get started with your camera.
Optional: Inserting a MicroSD card (not included)
-
First make sure your camera is not connected to the power adapter. The SD card slot is located under the camera lens, use your thumb to gently slide the lens upwards until you can access the slot.
-
Insert your Micro-SD card into the MicroSD card slot on the camera. Only use a class 10 MicroSD card (max 128GB).
-
A MicroSD card is required for recording footage.
Download the app -
Download the Connected at Home app from the Appstore or Google Playstore.
-
Alternatively, you can also use the Smart Life app.
INSTALLATION
- Plug one side of the USB cable into the camera and the other side into the power adapter.
- Place the power adapter in a wall socket.
- The camera will now start booting. This will take about 1 minute. The lens will rotate and a prompt will be heard.
- Open the Connected at Home or Smartlife app.
- Register or log in with existing account.
- Press + button to add the camera.
- For Connected at home app: Choose the Indoor pan/tilt camera.
- For Smartlife app: Choose Smart camera (WiFi)
- Follow the instructions in the app to configure the camera.
NOTE: Only 2,4 GHz Wi-Fi network is supported.
TRACKING MODE
When the camera detects a movement in tracking mode, it will rotate and follow
the movement. To activate the tracking mode, go to Settings in the App and
turn on “Motion Tracking”.
TROUBLESHOOTING
Reset
If needed, you can reset your camera by pressing and holding the reset button
for at least 6 seconds until you hear a prompt. After resetting, the camera
will start booting then you can follow the initial installation process.
Note: One device can only be paired with one Appaccount at a time, if the
device has already been paired with another account, then it can’t be paired
to a new account. The device can be removed from the app account by deleting
it from the app.
MORE INFORMATION
For more instructions and information, please visit our website,
www.smartwares.eu and search for “CIP-37553”.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>