smartwares CIP-39330 Mini Outdoor Camera Instruction Manual
- June 3, 2024
- smartwares
Table of Contents
smartwares CIP-39330 Mini Outdoor Camera
PARTS DESCRIPTION
Antenna- Indication LED
- Camera Lens
- Day/night sensor
- Bracket
- Reset button
- Backplate
- SD-card slot
- Adapter
- USB cable
BEFORE THE FIRST USE
Optional: Inserting a MicroSD card (not included)
- First make sure your camera is not connected to the power adapter. Insert your Micro-SD card all the way in the MicroSD card slot on the camera. Only use a class 10 MicroSD card (max 256GB).
- A MicroSD card is required for recording footage.
Download the app
- Download the Connected at Home app from the App store or Google Playstore.
- Alternatively, you can also use the Smart Life app.
INSTALLATION
- Choose a location to place your camera and check if there is a strong Wi-fi signal.
- Tip: Complete set up on app first before mounting the camera to the wall.
- Remove the backplate from the camera with the supplied Allen key.
- Mark the drill holes using the backplate. Also mark a drill hole of at least 1.5cm (in diameter) to lead the camera cable inside.
- Note: Before drilling, make sure that there are no wires or pipes located in the wall to prevent damage.
- Drill the holes and mount the backplate to the wall using the screws and plugs supplied.
- Use the Allen key to assemble the camera on the backplate.
- Connect one side of the USB cable to the camera and the other side to the power adapter.
- Place the power adapter in a wall socket.
- The camera will now start booting. This will take about 1 minute. Wait until the indication LED flashes white rapidly.
- Open the Connected at Home or Smartlife app.
- Register or log in with existing account.
- Press + button to add the camera.
- For Connected at home app: Choose the Mini outdoor camera.
- For Smartlife app: Choose Smart camera (Wi-Fi)
- Follow the instructions in the app to configure the camera.
- When the QR code is successfully scanned, the LED indicator will stop blinking rapidly. When the LED indicator turns solid white, press the ‘I heard a prompt’ button to continue.
- Note: Only 2,4 GHz Wi-Fi network is supported.
TROUBLESHOOTING
Reset
If needed, you can reset your camera by pressing and holding the reset button
for at least 6 seconds.
- The device can be removed from the app account by deleting it from the app.
Note: One device can only be paired with one App account at a time, if the device has already been paired with another account, then it can’t be paired to a new account.
Camera LED indicator information
- Solid white: Normal operation
- Solid red: Booting
- Flashing red: No internet connection
- Flashing white: pairing mode
MORE INFORMATION
For more instructions and information, please visit our website, www.smartwares.eu and search for “CIP-39330”.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>