Hill Laboratories HA90AM Hi-Lo Activator Chiropractic Table Owner’s Manual
- June 10, 2024
- Hill Laboratories
Table of Contents
Hill Laboratories HA90AM Hi-Lo Activator Chiropractic Table Owner’s Manual
Product Features
Basic Table Components and Options
- Full-length face cut-out
- Angled Foot Section
- Auto-Drop Foot Board
- Protective Acrylic Base Cover
- Electric Foot Pedal for Tilt (Hi-Lo) or Height (HA90AM)
- High-Capacity Paper Tray
- Patient Gripper Bar
Specifications
- Electric requirement 60 Hz,115 v~, 5.0 A (or 230 v~, 50 Hz)
- Lifting capacity – Hi-Lo: 350 pounds; HA90AM: 450 pounds
- Acrylic thermo-plastic base skirting
- Ultra-Cell ® foam for comfort and shape retention
- Tilt (Hi-Lo) – 0°-80° (in full-tilt position)
- Height Range – HA90AM: 22” – 35” Hi-Lo – Fixed Flat Height – 28″, 30″ or 34″
- Length – Hi-Lo: 6′ ; HA90AM: 6′ 3”
- Width – Both tables: 27”, optional 30”
- Shipping weight approximately 250-300 lbs.
Table Care
Cleaning your Table
Hill table upholstery may be cleaned with Hill Laboratories’ Vinyl and Leather
Cleaner or any household dishwashing liquid mixed with water. Hill also offers
Protex™ Disinfectant Spray and wipes to protect against pathogens, such as
MRSA, HIV, Staph and the H1N1 Swine Flu Virus. Many stubborn stains can be
removed by applying 91% rubbing alcohol (isopropyl alcohol) to the stain and
wiping with a dry, soft, lint-free cotton cloth, towel or soft bristle brush.
Caution: These solvents are highly flammable; do not use near open flame or intense heat. Wear rubber gloves during all cleaning activities. When cleaning other parts of your table (besides upholstery) use only nonabrasive household detergents and water.
Caution and Symbol Explanation
Caution: Children should never be left alone in a room with the table but
should always be accompanied by an adult.
Caution: Always unplug the table before performing any maintenance.
Caution: Check table once a year to make sure all internal and external
bolts are secure.
Caution: The power cord should be located to avoid risk of tripping or
having objects rolled over or placed on top of it. Damaged cords should be
replaced with another of hospital grade.
Caution: Grounding reliability can only be achieved when connected to an
equivalent receptacle marked hospital only or hospital grade.
Symbols – Each of the symbols below are used in your table labeling. An explanation of each is below.
Attention Symbol
Dangerous Voltage
Type BF Applied Part Symbol
Ground Symbol
Alternating Current Symbol
Don’t Touch Symbol
Basic Table Operation – Hill HA90AM
Height Pedal
The HA90AM is equipped with a corded foot pedal which controls the table
height from 22” – 35”. Press the right side of the pedal to elevate; the left
side to lower.
Auto-Touch Foot Pedal (option)
The Auto-Touch Foot Pedal option maintains upward or downward motion after
releasing the pedal.
To operate:
- When the table is at the lowest height, double-touch the “UP” arrow and release. The table will continue upward until you tap either side of the pedal again.
- When the table is at maximum height, double-touch the “DOWN” arrow and release. The table will continue downward until you tap either side of the pedal again.
- When the table is at any starting height in between, a single-touch up or down will start and stop the motion.
The Hill Hi-Lo features electric foot-pedal controlled movement and smooth transition between soft start-up and landing, the Hill Hi-Lo will not disturb the patient with sudden stopping or bumping. The standing foot board automatically folds down as the table top is lowered.
Tilt Pedal
The Hill Hi-Lo is equipped with a corded foot pedal which controls the table’s
angle of tilt from horizontal to a 80° standing position. Press the right side
of the pedal to elevate; the left side to lower.
Table Features
Face Cut-Out
Both the HA90AM and the Hill Hi-Lo have a 36″ extended face cut-out to
accommodate any size patient.
Angled Foot Section
Both the HA90AM and the Hill Hi-Lo feature an angled foot section which aids
patient comfort. The wedgeshape conforms to the angle of the leg (Some models
may be equipped with the optional flat cushion).
Standing Foot Board (Hi-Lo)
The standing foot board automatically folds down as the table top is tilted to
support the patient’s weight in the standing position.
Patient Gripper Bar (Hi-Lo)
A Patient Gripper Bar surround the perimeter of the table top. Patients should
firmly grasp the gripper bar when the table is in motion.
Paper Tray (Hi-Lo)
For storage and easy access to patient files or other items. The paper tray
pivots to stay parallel with the floor when the table is in motion.
Maintenance
Regular Maintenance
Your Hill HA90AM or Hill Hi-Lo are practically maintenance free. There is no
lubrication of parts needed.
Wiring Diagram – Hi-Lo
Height System for all Hi-Lo Models.
Index
A
Angled Foot Section 2, 5
Auto-Drop Foot Board 2, 5
Auto-Touch Foot Pedal 2, 4
B
Basic Table Components 2
C
Cleaning your Table 3
Cautions and Symbols 3
D
Diagrams (See Wiring Diagrams)
E
Electrical specifications 2
Electrical Schematics 7, 8
F
Face Cut-out 2, 5
Foot Board 2, 5
Foot Pedal
- Corded 2, 4
- Auto-Touch 4
G
Gripper Bar 2, 6
H
Height Pedal 2, 4
Height Range 2
L
Lifting Capacity 2
M
Maintenance 6
P
Paper Tray 2, 6
S
Service and Support 6 and intro, “At Your Service”
Specifications 2
T
Table Components 2
Tilt Pedal 2, 4
W
Warranty See intro, “At Your Service”
Wiring Diagrams 7, 8
Costumer Support
Additional service needed? Contact your local dealer or reach us
directly:
Phone: 1-877-445-5020
Fax: 610-647-6297
Email: Support@HillLabs.com
Technicians are available 9 am – 4 pm E.S.T., Monday – Friday
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>