PHILIPS PAxBLE AntumbraLite Button Instruction Manual
- June 9, 2024
- Philips
Table of Contents
PHILIPS PAxBLE AntumbraLite Button
Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
Installation Instructions
- Do not connect inputs to mains.
- Refer to Service Guide for full cleaning recommendations.
Installation of a home and building automation and control system shall comply
with IEC 60364 (all parts). The temperature limits and current-carrying
capacities for the communication wires specified in IEC 60364-5-52 shall not
be exceeded.
© 2022 Signify Holding. All rights reserved. Specifications are subject to
change without notice. No representation or warranty as to the accuracy or
completeness of the information included herein is given and any liability for
any action in reliance thereon is disclaimed. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips N.V. All other
trademarks are owned by Signify Holding or their respective owners.
www.dynalite.com