Fujian Senhaix Electronic Technology SPTT-100 4G LTE Network Mobile Radio User Manual

June 4, 2024
Fujian Senhaix Electronic Technology

**Fujian** Electronic Technology
SPTT-100 4G LTE Network Mobile Radio
User Manual
Fujian Senhaix Electronic Technology SPTT 100 4G LTE Network Mobile
Radio

Packing List

Please unpack carefully and check that you have received the following items. If any item is missing or damaged, please contact your dealer.

Item Quantity (PCS) Item Quantity (PCS)
Mobile Radio 1 Palm Microphone 1
Mounting Bracket Screw 1 Antenna 1
Mounting Bracket 7 Power Cord 1
GPS Antenna 1 User Manual 1

Product Overview

Product Layout
Fujian Senhaix Electronic Technology SPTT 100 4G LTE Network Mobile Radio -
Product Layout

**Key Definitions

**

Key Definition
Power On/Off, Volume Knob Long press 3s to turn on/off.

Adjust clockwise to increase volume.
| OK button
Short press to confirm the function in the menu interface, and long press to enter in the standby interface.
| Exit button
Short press to return to function. Long press to lock or unlock the keyboard in the display interface.
| Menu button
Menu functions
| Up button
Short press to move the function up in the menu interface, and long press to
enter in display interface.
| Down button
Short press to move the function down in the menu interface, and long press to enter in the display interface.

  1. Group
    Press the menu button on the standby interface, select the group selection, press the up and down keys to select, Press the menu key to confirm the selected group, and press the exit key to return to the upper option.

  2. Member
    Press the menu button on the standby interface, select the member selection, press the up and down keys to select, press the menu key to confirm the selected member, and press the exit key to return to the upper option.

  3. Friend
    Press the menu button on the standby interface, select the friend selection, press the up and down keys to select, press the menu key to confirm the selected friend, and press exit key to return to the upper option.

  4. Set
    Press the menu button on the standby inter ace, select the set selection, and press the up and down keys to select different functions.

  1. Tx&Rx Beep: set Tx beep, Rx beep, and off;
  2. Audio Quality: Set standard sound quality or high-definition sound quality, different sound qualities cannot talk to each other normally;
  3. BackLight: Set the length of time that the backlight will automatically turn off when there is no operation or intercom;
  4. Standby Display :Set or in standby;
  5. Online LED: Turn on this function, and the breathing light will flash when the account is logged in;
  6. LCD Contrast: Set the contrast of the LCD to level 0, level 1, level 2, level 3;
  7. Single Call Time: Set the time to automatically exit single call/group call when there is no intercom;
  8. Menu Hang: Set the time for automatically returning from the menu to the standby interface when there is no operation;
  9. Power on Display: Set the boot display or , you can edit the text through the column of the programming software;
  10. Key Lock: Set or to lock the keys;
  11. Screen Rotate: Set the display to show text in or ;
  12. Time Zone: Set the required time zone;
  13. Network Mode: Set the network connection mode;
  14. ACC Power On: After turning on this function, the radio will automatically turn on when it detects ACC voltage;
  15. ACC Power Off: After turning off this function, the radio will automatically shut down when there is no ACC voltage.
  1. Owner User: show current member name and group.
  2. Info:
  1. Message: message list and delete all;
  2. Account: account number, current group, and member;
  3. Version: module, POC, platform, hardware, and software version;
  4. IMEI Info: IMEI number;
  5. GPS info;
  1. Current Time: show the current date and time.

Care and Cleaning

To guarantee optimal performance as well as the long service life of the product, please follow these tips.
Product Care
Do not pierce or scrape the product.
Keep the product far away from substances that can corrode the circuitry.
Do not hold the product by the antenna or earpiece cable.
Product Cleaning
Clean up the dust and fine particles on the product surface and charge piece with a clean and dry lint-free cloth or a brush regularly.
Use neutral cleanser and non-woven fabric to clean the keys, knobs, and front case after long-time use.
Do not use chemical preparations such as stain removers, alcohol, sprays, or oil preparations, so as to avoid surface cause damage.
Make sure the product is completely dry before use.
Caution
Turn the product off before cleaning.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Warning

`` Fujian

Documents / Resources

| Fujian Senhaix Electronic Technology SPTT-100 4G LTE Network Mobile Radio [pdf] User Manual
SPTT-100, SPTT100, 2AS7F-SPTT-100, 2AS7FSPTT100, SPTT-100 4G LTE Network Mobile Radio, SPTT-100, 4G LTE Network Mobile Radio
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals