pdk RMW Red Module Wireless Kit Installation Guide

June 10, 2024
pdk


wireless kit installation

PN: RMW

RMW Red Module Wireless Kit

  1. Plug the wireless module into the Red 2 board as shown in the image.
    Ensure that the wireless module’s 20 pins align with the corresponding holes on the Red 2 board. Gently & carefully press the module into the board.

  2. Push the threaded end of the antenna wire (connected to the module) through the hole at the top of the Red 2 metal can.

  3. Connect the antenna to the antenna wire to the top of the enclosure.
    The antenna should point straight up.

Got a question or need help?
801.317.8802 option #2 support@prodatakey.com
REV 05202021

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals