Munchkin Bottle Warmer Instructions Manual
- June 10, 2024
- munchkin
Table of Contents
Munchkin Bottle Warmer Instructions
Product Overview
IMPORTANT SAFEGUARDS
WARNING: STRANGULATION HAZARD!
KEEP OUT OF REACH OF CHILDREN. DO NOT USE WITH EXTENSION CORDS. When using electrical appliances, basic safety precautions should always be followed including the following:
-
Read all instructions carefully before use.
-
To protect against electric shock, do not immerse the appliance, cord or plug in water or any liquid. Clean unit with damp cloth only.
-
For use by adults for intended purpose only. Any other use is inappropriate and dangerous. Keep out of the reach of small children.
-
If there is any visible damage to the appliance, disconnect immediately and do not use. The appliance does not contain any user-serviceable parts – repair should be done by qualified personnel. Do not dismantle.
-
For household use only. Do not use outdoors.
-
Appliance should be placed on a flat and stable area away from hot surfaces.
-
Do not let cord hang over edge of table or counter, or touch a hot surface.
-
Do not move appliance when in use or if it contains hot water.
-
Warming Chamber may become hot. Do not touch hot surfaces.
Use handle or knobs. -
Pour out excess water and unplug appliance when not in use or before cleaning or storing.
-
Ensure the contents are at a safe temperature before feeding.
-
Use plastic bottles approved for boiling or glass thermo-resistant bottles/containers with this appliance.
-
Unplug from outlet when not in use and before cleaning. Allow to cool before placing or removing basket and before cleaning.
-
Do not operate any appliance with a damaged cord or plug after the appliance malfunctions or has been damaged in any manner. Return appliance to Munchkin, Inc. for examination, repair, or adjustment.
-
The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
-
Do not place on or near a hot gas or electric burner, or in a heated oven.
-
To disconnect, always make sure unit is “off” before removing plug from wall outlet.
-
Do not use appliance for other than intended use.
-
Before serving, unplug cord from wall outlet. Do not leave cord within child’s reach.
-
Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
-
Close supervision is necessary when any appliance is used by or near children.
SAVE THESE INSTRUCTIONS
INSTRUCTIONS FOR USE
- Place unit on a flat surface away from the reach of children.
- Preheating of the appliance is not necessary.
- The appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
- A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord.
- B Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
- c. If a longer detachable power-supply cord or extension cord is used,
- the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, and
- the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
To Warm Bottles or Baby Food:
To warm your baby’s bottle or food, please follow the instructions in the
chart provided.
Note: These instructions are to be used as a guide only. Please note that there are many variables, such as size of the bottle and starting temperature of the food, which can impact the speed as well as the final temperature at which this unit warms the bottle or jar. Adjustments to the instructions below may be necessary. Always test the temperature of food before feeding baby.
- When ready to begin, insert plug into wall outlet.
- Remove Measuring Cup from its holder and fill it with water to the appropriate fill line, according to the chart.
Bottle / Jar Style and Volume of food| Food Temperature
(before warming)| Fill Line
---|---|---
4oz. Standard Bottle| Room Temperature*| B
4oz. Standard Bottle| Chilled / Refrigerated**| E
4oz. Wide Bottle| Room Temperature| B
4oz. Wide Bottle| Chilled / Refrigerated| E
5oz. Wide Bottle| Room Temperature| A
5oz. Wide Bottle| Chilled / Refrigerated| C
8oz. Standard Bottle| Room Temperature| B
8oz. Standard Bottle| Chilled / Refrigerated| E
9oz. Wide Bottle| Room Temperature| D
9oz. Wide Bottle| Chilled / Refrigerated| A + F
2.5oz. Food Jar| Room Temperature| D
4oz. Food Jar| Room Temperature| D
6oz. Food Jar| Room Temperature| D
*Room Temperature = 70°F / 21°C **Chilled / Refrigerated = 40°F / 5°C
-
Pour the pre-measured amount of water from Measuring Cup directly into Warming Chamber. Do not overfill. If too much water is used, the bottle or jar may be heated for too long a period and reach too high a temperature. Body temperature (98.6°F / 37°C) is ideal as a maximum warming level. Overfilling may also cause damage to the unit.
Always place Lift-Out Basket inside Warming Chamber before positioning your bottle or jar. Never place bottle or jar in Warming Chamber without using the Lift-Out Basket. Bottle/jar could be damaged or overheated. -
Place bottle or jar into warmer.
-
Place Adapter Ring on top of the Lift-out-Basket. If the Adapter Ring does not fit loosely around the bottle, do not use.
-
Press the “ON” button. The Indicator Light will illuminate. This indicates that the warming cycle has started.
-
The heater and light will shut off to indicate that the cycle has been completed. Remove the bottle/jar at once so that it will not continue heating.
- If bottle/jar is not warm enough, use slightly more water next time.
- If bottle/jar is too warm, use slightly less water.
-
Allow at least 5 minutes for the unit to cool before next use.
CAUTION
- If using glass, use only glass thermo-resistant bottles as sudden temperature change may cause glass to break.
- Always shake bottle/jar well and test to ensure that the contents are at the desired temperature before feeding your child.
- Beware of steam from the Warming Chamber, do not put your hands in or around the Warming Chamber during or immediately after warming.
- This product is not intended for use by children and persons with limited physical or mental capabilities unless they have been instructed or supervised on the proper use of this product by a person responsible for their safety.
TO CLEAN:
Always unplug unit and ensure that it is cool before cleaning.
- Bottle Warmer Unit: Wipe surface of unit as well as inside of the warming chamber with a damp cloth or sponge using mild liquid soap. Wipe with clear water. Do not submerge unit.
- Measuring Cup, Basket and Adapter Ring: Dishwasher safe (top rack) or wash with soapy water. Rinse with clear water. Allow to air dry. Do not use scouring pads, abrasives or solvents for cleaning; they may damage the appliance and its surfaces.
TO DE-SCALE:
It is helpful to de-scale your Bottle Warmer every four weeks to ensure that
it continues to work properly. To de-scale, mix 2 oz. (50ml) of white vinegar
with 4 oz. (100ml) of cold water and pour into the Warming Chamber. Allow
liquid to stand in the unit until any deposits (limescale) have dissolved.
Discard liquid and rinse with clear water. Any other servicing should be
performed by an authorized service representative.
- Electrical Rating: Input voltage: 120V AC ~ 60Hz
- Wattage: 500W Safety Approval: ETL
Limited Product Warranty
Munchkin’s High-Speed Bottle Warmer includes a one-year limited warranty
against defects from the date of purchase. In the event of a malfunction or
defect during the in-warranty period, Munchkin, Inc., at its option, will
replace or repair the product under warranty. Upon receipt of the product and
the proof of purchase with a valid date of purchase, the defective part will
be immediately repaired or replaced and returned to you free of charge (USA
only). Please send defective unit, proof of purchase with valid date of
purchase and a description of the problem you have encountered to: Munchkin,
Inc., 16689 Schoenborn Street, North Hills, CA 91343 Attn: High Speed Bottle
Warmer Warranty Note: Any product that has been subjected to misuse, abuse,
abnormal use, excessive wear and tear, improper assembly, negligence,
environmental exposure, alteration or accident, or has had its serial number
altered or removed invalidates any and all claims against the manufacturer.
Any damage to property during unintended use of this product is the sole
responsibility of the end user.
Questions: 800-344-2229 or
www.munchkin.com.
High Speed Bottle Warmer Chauffe-biberon ultra rapide
PRODUCT AND DESIGN ARE TM & ©2010 – 2012 MUNCHKIN, INC MUNCHKIN AND IT’S THE LITTLE THINGS ARE TRADEMARKS OF MUNCHKIN, INC. 16689 SCHOENBORN ST., NORTH HILLS, CA 91343. MUNCHKIN BABY CANADA LTD., 50 PRECIDIO CT., UNIT A, BRAMPTON, ON L6S 6E3. MADE IN CHINA LE PRODUIT ET MODÈLE SONT DES MARQUES DE COMMERCE SOUS COPYRIGHT (C) DE MUNCHKIN, INC. MUNCHKIN ET IT’S THE LITTLE THINGS SONT DES MARQUES DE COMMERCE DE MUNCHKIN, INC. 16689 SCHOENBORN ST., NORTH HILLS, CA 91343 MUNCHKIN BABY CANADA LTD., 50 PRECIDIO CT., UNIT A, BRAMPTON, ON L6S 6E3. FABRIQUÉ EN CHINE. HOUSEHOLD USE ONLY
800.344.BABY (2229)
www.munchkin.com
Download PDF:Munchkin Bottle Warmer Instructions Manual